Revert "ramips: convert MT7915 EEPROM to NVMEM format"
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_winstars_ws-wn583a6.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "winstars,ws-wn583a6", "mediatek,mt7621-soc";
10 model = "Winstars WS-WN583A6";
11
12 aliases {
13 led-boot = &led_status_red;
14 led-failsafe = &led_status_red;
15 led-running = &led_status_blue;
16 led-upgrade = &led_status_red;
17 };
18
19 leds {
20 compatible = "gpio-leds";
21
22 night_light_white {
23 label = "white:night_light";
24 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
25 };
26
27 led_status_blue: status_blue {
28 label = "blue:status";
29 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
30 };
31
32 status_amber {
33 label = "amber:status";
34 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
35 };
36
37 led_status_red: status_red {
38 label = "red:status";
39 gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
40 };
41 };
42
43 keys {
44 compatible = "gpio-keys";
45
46 reset {
47 label = "reset";
48 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
50 };
51
52 wps {
53 label = "wps";
54 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_WPS_BUTTON>;
56 };
57 };
58 };
59
60 &spi0 {
61 status = "okay";
62
63 flash@0 {
64 compatible = "jedec,spi-nor";
65 reg = <0>;
66 spi-max-frequency = <104000000>;
67 m25p,fast-read;
68
69 partitions {
70 compatible = "fixed-partitions";
71 #address-cells = <1>;
72 #size-cells = <1>;
73
74 partition@0 {
75 label = "bootloader";
76 reg = <0x0 0x30000>;
77 read-only;
78 };
79
80 partition@30000 {
81 label = "config";
82 reg = <0x30000 0x10000>;
83 read-only;
84 };
85
86 factory: partition@40000 {
87 compatible = "nvmem-cells";
88 label = "factory";
89 reg = <0x40000 0x10000>;
90 #address-cells = <1>;
91 #size-cells = <1>;
92 read-only;
93
94 eeprom_factory_0: eeprom@0 {
95 reg = <0x0 0x400>;
96 };
97
98 eeprom_factory_8000: eeprom@8000 {
99 reg = <0x8000 0x4da8>;
100 };
101
102 macaddr_factory_e000: macaddr@e000 {
103 reg = <0xe000 0x6>;
104 };
105
106 macaddr_factory_e006: macaddr@e006 {
107 reg = <0xe006 0x6>;
108 };
109 };
110
111 partition@50000 {
112 compatible = "denx,uimage";
113 label = "firmware";
114 reg = <0x50000 0x7b0000>;
115 };
116 };
117 };
118 };
119
120 &pcie {
121 status = "okay";
122 };
123
124 &pcie0 {
125 wifi@0,0 {
126 compatible = "mediatek,mt76";
127 reg = <0x0000 0 0 0 0>;
128 nvmem-cells = <&eeprom_factory_0>;
129 nvmem-cell-names = "eeprom";
130 };
131 };
132
133 &pcie1 {
134 wifi@0,0 {
135 compatible = "mediatek,mt76";
136 reg = <0x0000 0 0 0 0>;
137 nvmem-cells = <&eeprom_factory_8000>;
138 nvmem-cell-names = "eeprom";
139 };
140 };
141
142 &ethernet {
143 pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
144 };
145
146 &gmac0 {
147 nvmem-cells = <&macaddr_factory_e000>;
148 nvmem-cell-names = "mac-address";
149 };
150
151 &switch0 {
152 ports {
153 port@0 {
154 status = "okay";
155 label = "wan";
156 nvmem-cells = <&macaddr_factory_e006>;
157 nvmem-cell-names = "mac-address";
158 };
159
160 port@1 {
161 status = "okay";
162 label = "lan";
163 };
164 };
165 };
166
167 &state_default {
168 gpio {
169 groups = "jtag", "wdt", "rgmii2";
170 function = "gpio";
171 };
172 };
173
174 &xhci {
175 status = "disabled";
176 };