1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 led-boot = &led_status_yellow;
11 led-failsafe = &led_status_yellow;
12 led-running = &led_status_blue;
13 led-upgrade = &led_status_yellow;
17 bootargs = "console=ttyS0,115200n8";
21 compatible = "gpio-keys";
25 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
35 compatible = "jedec,spi-nor";
37 spi-max-frequency = <50000000>;
40 partitions: partitions {
41 compatible = "fixed-partitions";
53 reg = <0x30000 0x10000>;
59 reg = <0x40000 0x10000>;
63 factory: partition@50000 {
65 reg = <0x50000 0x10000>;
71 reg = <0x60000 0x10000>;
77 reg = <0x70000 0x10000>;
83 reg = <0x80000 0x100000>;
87 firmware: partition@180000 {
88 compatible = "denx,uimage";
90 reg = <0x180000 0xe80000>;
102 compatible = "mediatek,mt76";
103 reg = <0x0000 0 0 0 0>;
109 compatible = "mediatek,mt76";
110 reg = <0x0000 0 0 0 0>;
115 nvmem-cells = <&macaddr_factory_e000>;
116 nvmem-cell-names = "mac-address";
121 groups = "jtag", "uart2", "uart3", "wdt";
127 compatible = "nvmem-cells";
128 #address-cells = <1>;
131 macaddr_factory_e000: macaddr@e000 {
135 macaddr_factory_e006: macaddr@e006 {