target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "xzwifi,creativebox-v1", "mediatek,mt7621-soc";
  11         model = "CreativeBox v1";
  12
  13         aliases {
  14                 led-boot = &led_sys;
  15                 led-failsafe = &led_sys;
  16                 led-running = &led_sys;
  17                 led-upgrade = &led_sys;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "creativebox-v1:blue:power";
  29                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 led_sys: sys {
  34                         label = "creativebox-v1:blue:sys";
  35                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 internet {
  39                         label = "creativebox-v1:blue:internet";
  40                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan2g {
  44                         label = "creativebox-v1:blue:wlan2g";
  45                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  46                         linux,default-trigger = "phy0tpt";
  47                 };
  48
  49                 wlan5g {
  50                         label = "creativebox-v1:blue:wlan5g";
  51                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54         };
  55
  56         keys {
  57                 compatible = "gpio-keys";
  58
  59                 reset {
  60                         label = "reset";
  61                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_RESTART>;
  63                 };
  64         };
  65
  66         gpio_export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 power_usb2 {
  71                         gpio-export,name = "power_usb2";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 power_usb3 {
  77                         gpio-export,name = "power_usb3";
  78                         gpio-export,output = <1>;
  79                         gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
  80                 };
  81
  82                 power_sata {
  83                         gpio-export,name = "power_sata";
  84                         gpio-export,output = <1>;
  85                         gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
  86                 };
  87         };
  88 };
  89
  90 &spi0 {
  91         status = "okay";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <40000000>;
  97                 broken-flash-reset;
  98
  99                 partitions {
 100                         compatible = "fixed-partitions";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103
 104                         partition@0 {
 105                                 label = "u-boot";
 106                                 reg = <0x0 0x30000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@30000 {
 111                                 label = "u-boot-env";
 112                                 reg = <0x30000 0x10000>;
 113                                 read-only;
 114                         };
 115
 116                         factory: partition@40000 {
 117                                 label = "factory";
 118                                 reg = <0x40000 0x10000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@50000 {
 123                                 compatible = "denx,uimage";
 124                                 label = "firmware";
 125                                 reg = <0x50000 0x1fb0000>;
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &sdhci {
 132         status = "okay";
 133 };
 134
 135 &pcie {
 136         status = "okay";
 137 };
 138
 139 &pcie0 {
 140         wifi@0,0 {
 141                 compatible = "pci1400,7603";
 142                 reg = <0x0000 0 0 0 0>;
 143                 mediatek,mtd-eeprom = <&factory 0x0000>;
 144         };
 145 };
 146
 147 &pcie1 {
 148         wifi@0,0 {
 149                 compatible = "pci14c3,7662";
 150                 reg = <0x0000 0 0 0 0>;
 151                 mediatek,mtd-eeprom = <&factory 0x8000>;
 152                 ieee80211-freq-limit = <5000000 6000000>;
 153         };
 154 };
 155
 156 &gmac0 {
 157         mtd-mac-address = <&factory 0xe000>;
 158 };
 159
 160 &switch0 {
 161         ports {
 162                 port@0 {
 163                         status = "okay";
 164                         label = "lan1";
 165                 };
 166
 167                 port@1 {
 168                         status = "okay";
 169                         label = "lan2";
 170                 };
 171
 172                 port@2 {
 173                         status = "okay";
 174                         label = "lan3";
 175                 };
 176
 177                 port@3 {
 178                         status = "okay";
 179                         label = "lan4";
 180                 };
 181
 182                 port@4 {
 183                         status = "okay";
 184                         label = "wan";
 185                         mtd-mac-address = <&factory 0xe000>;
 186                         mtd-mac-address-increment = <1>;
 187                 };
 188         };
 189 };
 190
 191 &state_default {
 192         gpio {
 193                 groups = "wdt", "rgmii2";
 194                 function = "gpio";
 195         };
 196 };