target/linux/ramips/dts/mt7621_zbtlink_zbt-we1326.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
   8         model = "Zbtlink ZBT-WE1326";
   9
  10         aliases {
  11                 label-mac-device = &wifi1;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200";
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys";
  20
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  24                         linux,code = <KEY_RESTART>;
  25                 };
  26         };
  27 };
  28
  29 &state_default {
  30         gpio {
  31                 groups = "wdt";
  32                 function = "gpio";
  33         };
  34 };
  35
  36 &spi0 {
  37         status = "okay";
  38
  39         flash@0 {
  40                 compatible = "jedec,spi-nor";
  41                 reg = <0>;
  42                 spi-max-frequency = <10000000>;
  43
  44                 partitions {
  45                         compatible = "fixed-partitions";
  46                         #address-cells = <1>;
  47                         #size-cells = <1>;
  48
  49                         partition@0 {
  50                                 label = "u-boot";
  51                                 reg = <0x0 0x30000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@30000 {
  56                                 label = "u-boot-env";
  57                                 reg = <0x30000 0x10000>;
  58                                 read-only;
  59                         };
  60
  61                         factory: partition@40000 {
  62                                 label = "factory";
  63                                 reg = <0x40000 0x10000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@50000 {
  68                                 compatible = "denx,uimage";
  69                                 label = "firmware";
  70                                 reg = <0x50000 0xfb0000>;
  71                         };
  72                 };
  73         };
  74 };
  75
  76 &gmac0 {
  77         mtd-mac-address = <&factory 0xe000>;
  78 };
  79
  80 &switch0 {
  81         ports {
  82                 port@0 {
  83                         status = "okay";
  84                         label = "lan1";
  85                 };
  86
  87                 port@1 {
  88                         status = "okay";
  89                         label = "lan2";
  90                 };
  91
  92                 port@2 {
  93                         status = "okay";
  94                         label = "lan3";
  95                 };
  96
  97                 port@3 {
  98                         status = "okay";
  99                         label = "lan4";
 100                 };
 101
 102                 port@4 {
 103                         status = "okay";
 104                         label = "wan";
 105                         mtd-mac-address = <&factory 0xe006>;
 106                 };
 107         };
 108 };
 109
 110 &pcie {
 111         status = "okay";
 112 };
 113
 114 &pcie0 {
 115         wifi0: mt76@0,0 {
 116                 reg = <0x0000 0 0 0 0>;
 117                 mediatek,mtd-eeprom = <&factory 0x8000>;
 118                 ieee80211-freq-limit = <5000000 6000000>;
 119         };
 120 };
 121
 122 &pcie1 {
 123         wifi1: mt76@0,0 {
 124                 reg = <0x0000 0 0 0 0>;
 125                 mediatek,mtd-eeprom = <&factory 0x0000>;
 126                 ieee80211-freq-limit = <2400000 2500000>;
 127         };
 128 };
 129
 130 &sdhci {
 131         status = "okay";
 132 };