3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-we3526", "mediatek,mt7621-soc";
8 model = "Zbtlink ZBT-WE3526";
11 bootargs = "console=ttyS0,115200";
15 compatible = "gpio-keys";
19 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
20 linux,code = <KEY_RESTART>;
37 compatible = "jedec,spi-nor";
39 spi-max-frequency = <10000000>;
42 compatible = "fixed-partitions";
54 reg = <0x30000 0x10000>;
58 factory: partition@40000 {
60 reg = <0x40000 0x10000>;
64 firmware: partition@50000 {
65 compatible = "denx,uimage";
67 reg = <0x50000 0xfb0000>;
79 compatible = "pci14c3,7662";
80 reg = <0x0000 0 0 0 0>;
81 mediatek,mtd-eeprom = <&factory 0x8000>;
82 ieee80211-freq-limit = <5000000 6000000>;
92 compatible = "pci14c3,7603";
93 reg = <0x0000 0 0 0 0>;
94 mediatek,mtd-eeprom = <&factory 0x0000>;
99 mtd-mac-address = <&factory 0xe000>;
127 mtd-mac-address = <&factory 0xe006>;