3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
10 led-boot = &led_status;
11 led-failsafe = &led_status;
12 led-running = &led_status;
13 led-upgrade = &led_status;
14 label-mac-device = &wifi0;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-keys";
26 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
27 linux,code = <KEY_RESTART>;
32 compatible = "gpio-leds";
35 label = "green:status";
36 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
53 compatible = "jedec,spi-nor";
55 spi-max-frequency = <10000000>;
58 compatible = "fixed-partitions";
70 reg = <0x30000 0x10000>;
74 factory: partition@40000 {
75 compatible = "nvmem-cells";
77 reg = <0x40000 0x10000>;
82 eeprom_factory_0: eeprom@0 {
86 eeprom_factory_8000: eeprom@8000 {
90 macaddr_factory_e000: macaddr@e000 {
95 firmware: partition@50000 {
96 compatible = "denx,uimage";
109 compatible = "pci14c3,7603";
110 reg = <0x0000 0 0 0 0>;
111 nvmem-cells = <&eeprom_factory_0>;
112 nvmem-cell-names = "eeprom";
118 compatible = "pci14c3,7662";
119 reg = <0x0000 0 0 0 0>;
120 nvmem-cells = <&eeprom_factory_8000>;
121 nvmem-cell-names = "eeprom";
122 ieee80211-freq-limit = <5000000 6000000>;
131 pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
135 nvmem-cells = <&macaddr_factory_e000>;
136 nvmem-cell-names = "mac-address";
164 nvmem-cells = <&macaddr_factory_e000>;
165 nvmem-cell-names = "mac-address";
166 mac-address-increment = <1>;
173 groups = "wdt", "rgmii2";