target/linux/ramips/dts/mt7628an_netgear_r6120.dts

   1 #include "mt7628an_netgear_r6xxx.dtsi"
   2
   3 / {
   4         compatible = "netgear,r6120", "mediatek,mt7628an-soc";
   5         model = "Netgear R6120";
   6
   7         aliases {
   8                 label-mac-device = &ethernet;
   9         };
  10
  11         usb-regulator {
  12                 compatible = "regulator-fixed";
  13
  14                 regulator-name = "USB-power";
  15                 gpio = <&gpio 45 GPIO_ACTIVE_HIGH>;
  16                 regulator-min-microvolt = <5000000>;
  17                 regulator-max-microvolt = <5000000>;
  18                 enable-active-high;
  19
  20                 regulator-always-on;
  21         };
  22 };
  23
  24 &state_default {
  25         gpio {
  26                 groups = "p0led_an", "p1led_an", "p2led_an", "p3led_an",
  27                          "p4led_an", "wdt", "wled_an", "uart1";
  28                 function = "gpio";
  29         };
  30 };
  31
  32 &partitions {
  33         partition@90000 {
  34                 compatible = "denx,uimage";
  35                 label = "firmware";
  36                 reg = <0x90000 0xf60000>;
  37         };
  38
  39         partition@ff0000 {
  40                 label = "reserved";
  41                 reg = <0xff0000 0x10000>;
  42                 read-only;
  43         };
  44 };
  45
  46 &wifi5 {
  47         nvmem-cells = <&macaddr_factory_4>;
  48         nvmem-cell-names = "mac-address";
  49         mac-address-increment = <(2)>;
  50 };
  51
  52 &factory {
  53         compatible = "nvmem-cells";
  54         #address-cells = <1>;
  55         #size-cells = <1>;
  56
  57         macaddr_factory_4: macaddr@4 {
  58                 reg = <0x4 0x6>;
  59         };
  60 };