target/linux/ramips/dts/mt7628an_tplink_archer-c50-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "mt7628an_tplink_8m-split-uboot.dtsi"
   6
   7 / {
   8         compatible = "tplink,archer-c50-v4", "mediatek,mt7628an-soc";
   9         model = "TP-Link Archer C50 v4";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys";
  20
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  24                         linux,code = <KEY_RESTART>;
  25                 };
  26
  27                 rfkill {
  28                         label = "rfkill";
  29                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RFKILL>;
  31                 };
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 led_power: power {
  38                         function = LED_FUNCTION_POWER;
  39                         color = <LED_COLOR_ID_GREEN>;
  40                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan2 {
  44                         label = "green:wlan2g";
  45                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wlan5 {
  49                         label = "green:wlan5g";
  50                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 lan {
  54                         function = LED_FUNCTION_LAN;
  55                         color = <LED_COLOR_ID_GREEN>;
  56                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 wan {
  60                         function = LED_FUNCTION_WAN;
  61                         color = <LED_COLOR_ID_GREEN>;
  62                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wan_orange {
  66                         function = LED_FUNCTION_WAN;
  67                         color = <LED_COLOR_ID_ORANGE>;
  68                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wps {
  72                         function = LED_FUNCTION_WPS;
  73                         color = <LED_COLOR_ID_GREEN>;
  74                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  75                 };
  76         };
  77 };
  78
  79 &ehci {
  80         status = "disabled";
  81 };
  82
  83 &ohci {
  84         status = "disabled";
  85 };
  86
  87 &state_default {
  88         gpio {
  89                 groups = "i2c", "p0led_an", "p1led_an", "p2led_an",
  90                                    "p3led_an", "p4led_an", "wdt", "wled_an";
  91                 function = "gpio";
  92         };
  93 };
  94
  95 &pcie {
  96         status = "okay";
  97 };
  98
  99 &pcie0 {
 100         wifi@0,0 {
 101                 reg = <0x0000 0 0 0 0>;
 102                 ieee80211-freq-limit = <5000000 6000000>;
 103                 nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
 104                 nvmem-cell-names = "eeprom", "mac-address";
 105         };
 106 };