3 #include "mt7628an_tplink_8m.dtsi"
6 compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
7 model = "TP-Link TL-WR902AC v3";
10 led-boot = &led_power;
11 led-failsafe = &led_power;
12 led-running = &led_power;
13 led-upgrade = &led_power;
17 compatible = "gpio-keys";
21 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
22 linux,code = <KEY_RESTART>;
27 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
33 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
39 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_WPS_BUTTON>;
45 compatible = "gpio-leds";
48 label = "tl-wr902ac-v3:green:lan";
49 gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
53 label = "tl-wr902ac-v3:green:power";
54 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
58 label = "tl-wr902ac-v3:green:usb";
59 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
60 trigger-sources = <&ohci_port1>, <&ehci_port1>;
61 linux,default-trigger = "usbport";
65 label = "tl-wr902ac-v3:green:wan";
66 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
70 label = "tl-wr902ac-v3:green:wlan";
71 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
75 label = "tl-wr902ac-v3:green:wps";
76 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
83 ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
84 ralink,function = "gpio";
102 reg = <0x0000 0 0 0 0>;
103 mediatek,mtd-eeprom = <&factory 0x28000>;
104 ieee80211-freq-limit = <5000000 6000000>;
105 mtd-mac-address = <&factory 0xf100>;
106 mtd-mac-address-increment = <(-1)>;