3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
9 compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
10 model = "Belkin F5D8235 v1";
13 led-boot = &led_wired_blue;
14 led-failsafe = &led_wired_blue;
18 compatible = "cfi-flash";
19 reg = <0xbc400000 0x800000>;
24 compatible = "fixed-partitions";
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
42 reg = <0x40000 0x10000>;
46 compatible = "fixed-layout";
50 eeprom_factory_0: eeprom@0 {
54 macaddr_factory_4: macaddr@4 {
61 compatible = "denx,uimage";
63 reg = <0x50000 0x7b0000>;
69 compatible = "realtek,rtl8366s";
70 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
71 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
112 realtek,green-ethernet-features;
116 compatible = "gpio-keys-polled";
117 poll-interval = <100>;
121 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
122 linux,code = <KEY_WPS_BUTTON>;
127 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
128 linux,code = <KEY_RESTART>;
133 compatible = "gpio-leds";
136 label = "blue:internet";
137 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
141 label = "amber:internet";
142 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
146 label = "blue:modem";
147 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
151 label = "amber:modem";
152 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
156 label = "blue:router";
157 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
161 label = "blue:storage";
162 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
163 trigger-sources = <&ohci_port1>, <&ehci_port1>;
164 linux,default-trigger = "usbport";
168 label = "amber:storage";
169 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
173 label = "blue:security";
174 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
178 label = "amber:security";
179 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
182 led_wired_blue: wired {
183 label = "blue:wired";
184 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
188 label = "amber:wired";
189 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
193 label = "blue:wireless";
194 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
198 label = "amber:wireless";
199 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
206 groups = "spi", "i2c", "jtag", "mdio", "uartlite";
213 nvmem-cells = <&macaddr_factory_4>;
214 nvmem-cell-names = "mac-address";
217 mediatek,fixed-link = <1000 1 1 1>;
225 #address-cells = <1>;
227 compatible = "pci1033,0035";
228 reg = <0x8800 0 0 0 0>;
232 #trigger-source-cells = <0>;
237 #address-cells = <1>;
239 compatible = "pci1033,00e0";
240 reg = <0x8900 0 0 0 0>;
244 #trigger-source-cells = <0>;
250 nvmem-cells = <&eeprom_factory_0>;
251 nvmem-cell-names = "eeprom";