3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
9 compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
10 model = "Belkin F5D8235 v1";
13 led-boot = &led_wired_blue;
14 led-failsafe = &led_wired_blue;
18 compatible = "cfi-flash";
19 reg = <0xbc400000 0x800000>;
24 compatible = "fixed-partitions";
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
42 reg = <0x40000 0x10000>;
47 compatible = "denx,uimage";
49 reg = <0x50000 0x7b0000>;
55 compatible = "realtek,rtl8366s";
56 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
57 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
98 realtek,green-ethernet-features;
102 compatible = "gpio-keys-polled";
103 poll-interval = <100>;
107 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
108 linux,code = <KEY_WPS_BUTTON>;
113 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
114 linux,code = <KEY_RESTART>;
119 compatible = "gpio-leds";
122 label = "blue:internet";
123 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
127 label = "amber:internet";
128 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
132 label = "blue:modem";
133 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
137 label = "amber:modem";
138 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
142 label = "blue:router";
143 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
147 label = "blue:storage";
148 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
149 trigger-sources = <&ohci_port1>, <&ehci_port1>;
150 linux,default-trigger = "usbport";
154 label = "amber:storage";
155 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
159 label = "blue:security";
160 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
164 label = "amber:security";
165 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
168 led_wired_blue: wired {
169 label = "blue:wired";
170 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
174 label = "amber:wired";
175 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
179 label = "blue:wireless";
180 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
184 label = "amber:wireless";
185 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
192 groups = "spi", "i2c", "jtag", "mdio", "uartlite";
199 nvmem-cells = <&macaddr_factory_4>;
200 nvmem-cell-names = "mac-address";
203 mediatek,fixed-link = <1000 1 1 1>;
211 #address-cells = <1>;
213 compatible = "pci1033,0035";
214 reg = <0x8800 0 0 0 0>;
218 #trigger-source-cells = <0>;
223 #address-cells = <1>;
225 compatible = "pci1033,00e0";
226 reg = <0x8900 0 0 0 0>;
230 #trigger-source-cells = <0>;
237 ralink,mtd-eeprom = <&factory 0x0>;
241 compatible = "nvmem-cells";
242 #address-cells = <1>;
245 macaddr_factory_4: macaddr@4 {