target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/mtd/partitions/uimage.h>
   6
   7 / {
   8         compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
   9         model = "Edimax 3g-6200nl";
  10
  11         aliases {
  12                 led-boot = &led_internet;
  13                 led-failsafe = &led_internet;
  14                 led-running = &led_internet;
  15                 led-upgrade = &led_internet;
  16         };
  17
  18         flash@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 label = "u-boot";
  31                                 reg = <0x0 0x30000>;
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 label = "u-boot-env";
  37                                 reg = <0x30000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         factory: partition@40000 {
  42                                 label = "factory";
  43                                 reg = <0x40000 0x10000>;
  44                                 read-only;
  45                         };
  46
  47                         partition@3e0000 {
  48                                 label = "cimage";
  49                                 reg = <0x3e0000 0x20000>;
  50                                 read-only;
  51                         };
  52
  53                         partition@50000 {
  54                                 compatible = "openwrt,uimage", "denx,uimage";
  55                                 openwrt,offset = <FW_EDIMAX_OFFSET>;
  56                                 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
  57                                 label = "firmware";
  58                                 reg = <0x50000 0x390000>;
  59                         };
  60                 };
  61         };
  62
  63         leds {
  64                 compatible = "gpio-leds";
  65
  66                 led_internet: internet {
  67                         label = "green:internet";
  68                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wlan {
  72                         label = "green:wlan";
  73                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76
  77         keys {
  78                 compatible = "gpio-keys-polled";
  79                 poll-interval = <20>;
  80
  81                 reset {
  82                         label = "reset";
  83                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  84                         linux,code = <KEY_RESTART>;
  85                 };
  86         };
  87 };
  88
  89 &state_default {
  90         gpio {
  91                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  92                 function = "gpio";
  93         };
  94 };
  95
  96 &ethernet {
  97         nvmem-cells = <&macaddr_factory_4>;
  98         nvmem-cell-names = "mac-address";
  99 };
 100
 101 &esw {
 102         mediatek,portdisable = <0x37>;
 103 };
 104
 105 &wmac {
 106         ralink,mtd-eeprom = <&factory 0x0>;
 107 };
 108
 109 &otg {
 110         status = "okay";
 111 };
 112
 113 &factory {
 114         compatible = "nvmem-cells";
 115         #address-cells = <1>;
 116         #size-cells = <1>;
 117
 118         macaddr_factory_4: macaddr@4 {
 119                 reg = <0x4 0x6>;
 120         };
 121 };