target/linux/ramips/dts/rt3050_jcg_jhr-n805r.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
   8         model = "JCG JHR-N805R";
   9
  10         aliases {
  11                 led-boot = &led_system;
  12                 led-failsafe = &led_system;
  13                 led-running = &led_system;
  14                 led-upgrade = &led_system;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "blue:system";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35         };
  36 };
  37
  38 &state_default {
  39         gpio {
  40                 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
  41                 function = "gpio";
  42         };
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         flash@0 {
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 spi-max-frequency = <10000000>;
  52
  53                 partitions {
  54                         compatible = "fixed-partitions";
  55                         #address-cells = <1>;
  56                         #size-cells = <1>;
  57
  58                         partition@0 {
  59                                 label = "u-boot";
  60                                 reg = <0x0 0x30000>;
  61                                 read-only;
  62                         };
  63
  64                         partition@30000 {
  65                                 label = "u-boot-env";
  66                                 reg = <0x30000 0x10000>;
  67                                 read-only;
  68                         };
  69
  70                         factory: partition@40000 {
  71                                 compatible = "nvmem-cells";
  72                                 label = "factory";
  73                                 reg = <0x40000 0x10000>;
  74                                 #address-cells = <1>;
  75                                 #size-cells = <1>;
  76                                 read-only;
  77
  78                                 eeprom_factory_0: eeprom@0 {
  79                                         reg = <0x0 0x200>;
  80                                 };
  81
  82                                 macaddr_factory_2e: macaddr@2e {
  83                                         reg = <0x2e 0x6>;
  84                                 };
  85                         };
  86
  87                         partition@50000 {
  88                                 compatible = "denx,uimage";
  89                                 label = "firmware";
  90                                 reg = <0x50000 0x3b0000>;
  91                         };
  92                 };
  93         };
  94 };
  95
  96 &ethernet {
  97         nvmem-cells = <&macaddr_factory_2e>;
  98         nvmem-cell-names = "mac-address";
  99 };
 100
 101 &esw {
 102         mediatek,portmap = <0x3e>;
 103 };
 104
 105 &wmac {
 106         nvmem-cells = <&eeprom_factory_0>;
 107         nvmem-cell-names = "eeprom";
 108 };