target/linux/ramips/dts/rt3052_asiarf_awapn2403.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "asiarf,awapn2403", "ralink,rt3052-soc";
   8         model = "AsiaRF AWAPN2403";
   9
  10         aliases {
  11                 led-boot = &led_wps;
  12                 led-failsafe = &led_wps;
  13                 led-running = &led_wps;
  14                 led-upgrade = &led_wps;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_wps: wps {
  21                         label = "green:wps";
  22                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35         };
  36 };
  37
  38 &spi0 {
  39         status = "okay";
  40
  41         flash@0 {
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <10000000>;
  45
  46                 partitions {
  47                         compatible = "fixed-partitions";
  48                         #address-cells = <1>;
  49                         #size-cells = <1>;
  50
  51                         partition@0 {
  52                                 label = "u-boot";
  53                                 reg = <0x0 0x30000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@30000 {
  58                                 label = "u-boot-env";
  59                                 reg = <0x30000 0x10000>;
  60                                 read-only;
  61                         };
  62
  63                         factory: partition@40000 {
  64                                 label = "factory";
  65                                 reg = <0x40000 0x10000>;
  66                                 read-only;
  67
  68                                 nvmem-layout {
  69                                         compatible = "fixed-layout";
  70                                         #address-cells = <1>;
  71                                         #size-cells = <1>;
  72
  73                                         eeprom_factory_0: eeprom@0 {
  74                                                 reg = <0x0 0x200>;
  75                                         };
  76                                 };
  77                         };
  78
  79                         partition@50000 {
  80                                 compatible = "denx,uimage";
  81                                 label = "firmware";
  82                                 reg = <0x50000 0x3b0000>;
  83                         };
  84                 };
  85         };
  86 };
  87
  88 &state_default {
  89         gpio {
  90                 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
  91                 function = "gpio";
  92         };
  93 };
  94
  95 &esw {
  96         mediatek,portmap = <0x3e>;
  97 };
  98
  99 &wmac {
 100         nvmem-cells = <&eeprom_factory_0>;
 101         nvmem-cell-names = "eeprom";
 102 };