3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "fon,fonera-20n", "ralink,rt3052-soc";
8 model = "La Fonera 2.0N";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "cfi-flash";
19 reg = <0x1f000000 0x800000>;
24 compatible = "fixed-partitions";
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
42 reg = <0x40000 0x10000>;
46 compatible = "fixed-layout";
50 eeprom_factory_0: eeprom@0 {
54 macaddr_factory_28: macaddr@28 {
61 compatible = "denx,uimage";
63 reg = <0x50000 0x7b0000>;
69 compatible = "gpio-leds";
72 label = "orange:wifi";
73 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
77 label = "green:power";
78 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
83 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
84 trigger-sources = <&otg_port1>;
85 linux,default-trigger = "usbport";
90 compatible = "gpio-keys-polled";
95 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_RESTART>;
101 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
102 linux,code = <KEY_RFKILL>;
103 linux,input-type = <EV_SW>;
110 groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
116 nvmem-cells = <&macaddr_factory_28>;
117 nvmem-cell-names = "mac-address";
121 #address-cells = <1>;
124 mediatek,portmap = <0x2f>;
127 compatible = "swconfig,port";
129 swconfig,segment = "lan";
130 swconfig,portmap = <0 4>;
134 compatible = "swconfig,port";
136 swconfig,segment = "lan";
137 swconfig,portmap = <1 3>;
141 compatible = "swconfig,port";
143 swconfig,segment = "lan";
144 swconfig,portmap = <2 2>;
148 compatible = "swconfig,port";
150 swconfig,segment = "lan";
151 swconfig,portmap = <3 1>;
155 compatible = "swconfig,port";
157 swconfig,segment = "wan";
158 swconfig,portmap = <4 0>;
163 nvmem-cells = <&eeprom_factory_0>;
164 nvmem-cell-names = "eeprom";