3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "netgear,wnce2001", "ralink,rt3052-soc";
8 model = "Netgear WNCE2001";
11 led-boot = &led_power_green;
12 led-failsafe = &led_power_green;
13 led-running = &led_power_green;
14 led-upgrade = &led_power_green;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
24 led_power_green: power-green {
25 label = "green:power";
26 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
31 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
36 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
41 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
46 compatible = "gpio-keys-polled";
51 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
52 linux,code = <KEY_RESTART>;
57 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_WPS_BUTTON>;
63 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
69 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
79 compatible = "jedec,spi-nor";
81 spi-max-frequency = <10000000>;
84 compatible = "fixed-partitions";
94 factory: partition@30000 {
96 reg = <0x30000 0x10000>;
102 reg = <0x40000 0x20000>;
108 reg = <0x60000 0x30000>;
114 reg = <0x90000 0x10000>;
120 reg = <0xa0000 0x10000>;
124 compatible = "denx,uimage";
126 reg = <0xb0000 0x350000>;
134 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
140 nvmem-cells = <&macaddr_factory_28>;
141 nvmem-cell-names = "mac-address";
145 ralink,mtd-eeprom = <&factory 0x0>;
149 compatible = "nvmem-cells";
150 #address-cells = <1>;
153 macaddr_factory_28: macaddr@28 {