3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "allnet,all5002", "ralink,rt3352-soc";
8 model = "Allnet ALL5002";
14 compatible = "i2c-gpio";
15 gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
16 i2c-gpio,delay-us = <10>;
20 compatible = "inxp,pcf8574a";
26 compatible = "national,lm92";
32 compatible = "gpio-leds";
36 gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
41 gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
50 compatible = "jedec,spi-nor";
52 spi-max-frequency = <10000000>;
55 compatible = "fixed-partitions";
67 reg = <0x30000 0x10000>;
71 factory: partition@40000 {
73 reg = <0x40000 0x10000>;
78 compatible = "denx,uimage";
80 reg = <0x50000 0x1fb0000>;
88 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
94 nvmem-cells = <&macaddr_factory_28>;
95 nvmem-cell-names = "mac-address";
99 mediatek,portmap = <0x3f>;
103 ralink,mtd-eeprom = <&factory 0x0>;
115 compatible = "nvmem-cells";
116 #address-cells = <1>;
119 macaddr_factory_28: macaddr@28 {