3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "samsung,cy-swr1100", "ralink,rt3662-soc", "ralink,rt3883-soc";
8 model = "Samsung CY-SWR1100";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "cfi-flash";
19 reg = <0x1c000000 0x800000>;
23 compatible = "fixed-partitions";
35 reg = <0x30000 0x4000>;
39 factory: partition@34000 {
40 compatible = "nvmem-cells";
42 reg = <0x34000 0x4000>;
47 eeprom_factory_0: eeprom@0 {
51 eeprom_factory_2000: eeprom@2000 {
58 reg = <0x38000 0x8000>;
64 reg = <0x40000 0x10000>;
71 reg = <0x50000 0x7b0000>;
77 compatible = "realtek,rtl8367";
78 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
79 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
80 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
84 compatible = "gpio-keys";
88 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_RESTART>;
94 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
95 linux,code = <KEY_WPS_BUTTON>;
100 compatible = "gpio-leds";
104 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
109 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
110 trigger-sources = <&ohci_port1>, <&ehci_port1>;
111 linux,default-trigger = "usbport";
115 label = "blue:power";
116 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
127 groups = "i2c", "spi";
134 mediatek,fixed-link = <1000 1 1 1>;
147 compatible = "pci1814,3091";
148 reg = <0x10000 0 0 0 0>;
149 nvmem-cells = <&eeprom_factory_2000>;
150 nvmem-cell-names = "eeprom";
156 nvmem-cells = <&eeprom_factory_0>;
157 nvmem-cell-names = "eeprom";