3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/leds/common.h>
8 compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
9 model = "Sitecom WLR-6000";
12 led-boot = &led_power;
13 led-failsafe = &led_power;
14 led-running = &led_power;
15 led-upgrade = &led_power;
19 compatible = "gpio-keys-polled";
24 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
25 linux,code = <KEY_RESTART>;
30 compatible = "gpio-leds";
33 function = LED_FUNCTION_POWER;
34 color = <LED_COLOR_ID_RED>;
35 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
40 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-export";
49 gpio-export,name = "usb";
50 gpio-export,output = <1>;
51 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
62 groups = "i2c", "jtag", "uartf";
69 nvmem-cells = <&macaddr_factory_8004 1>;
70 nvmem-cell-names = "mac-address";
80 phy0: ethernet-phy@0 {
84 qca,ar8327-initvals = <
85 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
86 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
87 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
88 0x50 0xc437c437 /* LED Control Register 0 */
89 0x54 0xc337c337 /* LED Control Register 1 */
90 0x58 0x00000000 /* LED Control Register 2 */
91 0x5c 0x03ffff00 /* LED Control Register 3 */
92 0x7c 0x0000007e /* PORT0_STATUS */
93 0x94 0x0000007e /* PORT6 STATUS */
103 compatible = "jedec,spi-nor";
105 spi-max-frequency = <8600000>;
109 compatible = "fixed-partitions";
110 #address-cells = <1>;
120 label = "u-boot-env";
121 reg = <0x30000 0x10000>;
127 reg = <0x40000 0x10000>;
131 compatible = "fixed-layout";
132 #address-cells = <1>;
135 eeprom_factory_0: eeprom@0 {
139 eeprom_factory_8000: eeprom@8000 {
140 reg = <0x8000 0x200>;
143 macaddr_factory_8004: macaddr@8004 {
144 compatible = "mac-base";
146 #nvmem-cell-cells = <1>;
152 compatible = "denx,uimage";
154 reg = <0x50000 0x713000>;
158 label = "manufacture";
159 reg = <0x763000 0x7D000>;
165 reg = <0x7E0000 0x10000>;
171 reg = <0x7F0000 0x10000>;
186 compatible = "pci1814,3091";
187 reg = <0x10000 0 0 0 0>;
188 nvmem-cells = <&eeprom_factory_8000>;
189 nvmem-cell-names = "eeprom";
195 nvmem-cells = <&eeprom_factory_0>;
196 nvmem-cell-names = "eeprom";