3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "belkin,f7c027", "ralink,rt5350-soc";
8 model = "Belkin F7C027";
11 led-boot = &led_status_orange;
12 led-failsafe = &led_status_orange;
13 led-running = &led_status_orange;
14 led-upgrade = &led_status_orange;
18 compatible = "gpio-leds";
21 label = "blue:status";
22 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
27 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
30 led_status_orange: orange {
31 label = "orange:status";
32 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
36 label = "device:relay";
37 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
42 compatible = "gpio-keys-polled";
47 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_RESTART>;
53 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_RFKILL>;
59 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
69 compatible = "jedec,spi-nor";
71 spi-max-frequency = <10000000>;
74 compatible = "fixed-partitions";
86 reg = <0x30000 0x10000>;
90 factory: partition@40000 {
92 reg = <0x40000 0x10000>;
97 compatible = "denx,uimage";
99 reg = <0x50000 0x770000>;
104 reg = <0x7c0000 0x770000>;
108 label = "belkin_settings";
109 reg = <0xf30000 0xa0000>;
114 reg = <0xfd0000 0x10000>;
119 reg = <0xfe0000 0x10000>;
123 label = "user_factory";
124 reg = <0xff0000 0x10000>;
131 ralink,mtd-eeprom = <&factory 0x0>;
136 groups = "i2c", "jtag", "uartf";