ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
[openwrt/openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-pwh2004.c
1 /*
2 * Prolink PWH2004 support (or Abocom WR5205)
3 *
4 * Copyright (C) 2010 Esa Hyytia <esa@netlab.tkk.fi>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16
17 #include <asm/mach-ralink/machine.h>
18 #include <asm/mach-ralink/dev-gpio-buttons.h>
19 #include <asm/mach-ralink/dev-gpio-leds.h>
20 #include <asm/mach-ralink/rt305x.h>
21 #include <asm/mach-ralink/rt305x_regs.h>
22
23 #include "devices.h"
24
25 #define PWH2004_GPIO_BUTTON_WPS 12
26 #define PWH2004_GPIO_LED_POWER 9
27 #define PWH2004_GPIO_LED_WIFI 14
28 #define PWH2004_BUTTONS_POLL_INTERVAL 20
29
30 static struct mtd_partition pwh2004_partitions[] = {
31 {
32 .name = "u-boot",
33 .offset = 0,
34 .size = 0x030000,
35 .mask_flags = MTD_WRITEABLE,
36 }, {
37 .name = "config",
38 .offset = 0x030000,
39 .size = 0x010000,
40 .mask_flags = MTD_WRITEABLE,
41 }, {
42 .name = "factory",
43 .offset = 0x040000,
44 .size = 0x010000,
45 .mask_flags = MTD_WRITEABLE,
46 }, {
47 .name = "kernel",
48 .offset = 0x050000,
49 .size = 0x7b0000,
50 }, {
51 .name = "firmware",
52 .offset = 0x050000,
53 .size = 0x7b0000,
54 }
55 };
56
57 static struct physmap_flash_data pwh2004_flash_data = {
58 .nr_parts = ARRAY_SIZE(pwh2004_partitions),
59 .parts = pwh2004_partitions,
60 };
61
62 static struct gpio_led pwh2004_leds_gpio[] __initdata = {
63 {
64 .name = "pwh2004:red:wifi",
65 .gpio = PWH2004_GPIO_LED_WIFI,
66 .active_low = 1,
67 }, {
68 .name = "pwh2004:green:power",
69 .gpio = PWH2004_GPIO_LED_POWER,
70 .active_low = 1,
71 }
72 };
73
74 static struct gpio_button pwh2004_gpio_buttons[] __initdata = {
75 {
76 .desc = "wps",
77 .type = EV_KEY,
78 .code = KEY_RESTART,
79 .threshold = 3,
80 .gpio = PWH2004_GPIO_BUTTON_WPS,
81 .active_low = 1,
82 }
83 };
84
85 static void __init pwh2004_init(void)
86 {
87 rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
88 rt305x_register_flash(0, &pwh2004_flash_data);
89 ramips_register_gpio_leds(-1, ARRAY_SIZE(pwh2004_leds_gpio),
90 pwh2004_leds_gpio);
91 ramips_register_gpio_buttons(-1, PWH2004_BUTTONS_POLL_INTERVAL,
92 ARRAY_SIZE(pwh2004_gpio_buttons),
93 pwh2004_gpio_buttons);
94 rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
95 rt305x_register_ethernet();
96 rt305x_register_wifi();
97 rt305x_register_wdt();
98 }
99
100 MIPS_MACHINE(RAMIPS_MACH_PWH2004, "PWH2004", "Prolink PWH2004",
101 pwh2004_init);