ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
[openwrt/openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-w502u.c
1 /*
2 * ALFA Networks W502U board support
3 *
4 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16
17 #include <asm/mach-ralink/machine.h>
18 #include <asm/mach-ralink/dev-gpio-buttons.h>
19 #include <asm/mach-ralink/dev-gpio-leds.h>
20 #include <asm/mach-ralink/rt305x.h>
21 #include <asm/mach-ralink/rt305x_regs.h>
22
23 #include "devices.h"
24
25 #define W502U_GPIO_LED_USB 13
26 #define W502U_GPIO_LED_WPS 14
27
28 #define W502U_GPIO_BUTTON_WPS 0
29 #define W502U_GPIO_BUTTON_RESET 10
30
31 #define W502U_BUTTONS_POLL_INTERVAL 20
32
33 static struct mtd_partition w502u_partitions[] = {
34 {
35 .name = "u-boot",
36 .offset = 0,
37 .size = 0x030000,
38 .mask_flags = MTD_WRITEABLE,
39 }, {
40 .name = "config",
41 .offset = 0x030000,
42 .size = 0x010000,
43 .mask_flags = MTD_WRITEABLE,
44 }, {
45 .name = "factory",
46 .offset = 0x040000,
47 .size = 0x010000,
48 .mask_flags = MTD_WRITEABLE,
49 }, {
50 .name = "kernel",
51 .offset = 0x050000,
52 .size = 0x0d0000,
53 }, {
54 .name = "rootfs",
55 .offset = 0x120000,
56 .size = 0x6d0000,
57 }, {
58 .name = "data3g",
59 .offset = 0x7f0000,
60 .size = 0x010000,
61 .mask_flags = MTD_WRITEABLE,
62 }, {
63 .name = "firmware",
64 .offset = 0x050000,
65 .size = 0x7a0000,
66 }
67 };
68
69 static struct physmap_flash_data w502u_flash_data = {
70 .nr_parts = ARRAY_SIZE(w502u_partitions),
71 .parts = w502u_partitions,
72 };
73
74 static struct gpio_led w502u_leds_gpio[] __initdata = {
75 {
76 .name = "alfa:blue:usb",
77 .gpio = W502U_GPIO_LED_USB,
78 .active_low = 1,
79 },
80 {
81 .name = "alfa:blue:wps",
82 .gpio = W502U_GPIO_LED_WPS,
83 .active_low = 1,
84 },
85 };
86
87 static struct gpio_button w502u_gpio_buttons[] __initdata = {
88 {
89 .desc = "Reset button",
90 .type = EV_KEY,
91 .code = KEY_RESTART,
92 .threshold = 3,
93 .gpio = W502U_GPIO_BUTTON_RESET,
94 .active_low = 1,
95 },
96 {
97 .desc = "WPS button",
98 .type = EV_KEY,
99 .code = KEY_WPS_BUTTON,
100 .threshold = 3,
101 .gpio = W502U_GPIO_BUTTON_WPS,
102 .active_low = 1,
103 },
104 };
105
106 static void __init w502u_init(void)
107 {
108 rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
109 RT305X_GPIO_MODE_UART0_SHIFT));
110
111 rt305x_register_flash(0, &w502u_flash_data);
112 rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
113 rt305x_register_ethernet();
114 ramips_register_gpio_leds(-1, ARRAY_SIZE(w502u_leds_gpio),
115 w502u_leds_gpio);
116 ramips_register_gpio_buttons(-1, W502U_BUTTONS_POLL_INTERVAL,
117 ARRAY_SIZE(w502u_gpio_buttons),
118 w502u_gpio_buttons);
119 rt305x_register_wifi();
120 rt305x_register_wdt();
121 rt305x_register_usb();
122 }
123
124 MIPS_MACHINE(RAMIPS_MACH_W502U, "W502U", "ALFA Networks W502U",
125 w502u_init);