1 From 41aa7fc236fdb1f4c9b8b10df9b71f0d248cb36b Mon Sep 17 00:00:00 2001
2 From: John Crispin <blogic@openwrt.org>
3 Date: Mon, 7 Dec 2015 17:11:12 +0100
4 Subject: [PATCH 09/53] PCI: MIPS: adds mt7620a pcie driver
6 Signed-off-by: John Crispin <blogic@openwrt.org>
8 arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
9 arch/mips/pci/Makefile | 1 +
10 arch/mips/pci/pci-mt7620.c | 396 ++++++++++++++++++++++++++++
11 arch/mips/ralink/Kconfig | 1 +
12 4 files changed, 399 insertions(+)
13 create mode 100644 arch/mips/pci/pci-mt7620.c
15 --- a/arch/mips/pci/Makefile
16 +++ b/arch/mips/pci/Makefile
17 @@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
18 obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
19 obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
20 obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
21 +obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
22 obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
23 obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
24 obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
26 +++ b/arch/mips/pci/pci-mt7620.c
29 + * Ralink MT7620A SoC PCI support
31 + * Copyright (C) 2007-2013 Bruce Chang
32 + * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
34 + * This program is free software; you can redistribute it and/or modify it
35 + * under the terms of the GNU General Public License version 2 as published
36 + * by the Free Software Foundation.
39 +#include <linux/types.h>
40 +#include <linux/pci.h>
41 +#include <linux/io.h>
42 +#include <linux/init.h>
43 +#include <linux/delay.h>
44 +#include <linux/interrupt.h>
45 +#include <linux/module.h>
46 +#include <linux/of.h>
47 +#include <linux/of_irq.h>
48 +#include <linux/of_pci.h>
49 +#include <linux/reset.h>
50 +#include <linux/platform_device.h>
52 +#include <asm/mach-ralink/ralink_regs.h>
53 +#include <asm/mach-ralink/mt7620.h>
55 +#define RALINK_PCI_MM_MAP_BASE 0x20000000
56 +#define RALINK_PCI_IO_MAP_BASE 0x10160000
58 +#define RALINK_INT_PCIE0 4
59 +#define RALINK_SYSCFG1 0x14
60 +#define RALINK_CLKCFG1 0x30
61 +#define RALINK_GPIOMODE 0x60
62 +#define RALINK_PCIE_CLK_GEN 0x7c
63 +#define RALINK_PCIE_CLK_GEN1 0x80
64 +#define PCIEPHY0_CFG 0x90
65 +#define PPLL_CFG1 0x9c
66 +#define PPLL_DRV 0xa0
67 +#define PDRV_SW_SET (1<<31)
68 +#define LC_CKDRVPD_ (1<<19)
70 +#define RALINK_PCI_CONFIG_ADDR 0x20
71 +#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
72 +#define MEMORY_BASE 0x0
73 +#define RALINK_PCIE0_RST (1<<26)
74 +#define RALINK_PCI_BASE 0xB0140000
75 +#define RALINK_PCI_MEMBASE 0x28
76 +#define RALINK_PCI_IOBASE 0x2C
78 +#define RT6855_PCIE0_OFFSET 0x2000
80 +#define RALINK_PCI_PCICFG_ADDR 0x00
81 +#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
82 +#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
83 +#define RALINK_PCI0_ID 0x30
84 +#define RALINK_PCI0_CLASS 0x34
85 +#define RALINK_PCI0_SUBID 0x38
86 +#define RALINK_PCI0_STATUS 0x50
87 +#define RALINK_PCI_PCIMSK_ADDR 0x0C
89 +#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
90 +#define RALINK_PCIE0_CLK_EN (1 << 26)
92 +#define BUSY 0x80000000
93 +#define WAITRETRY_MAX 10
94 +#define WRITE_MODE (1UL << 23)
98 +static void __iomem *bridge_base;
99 +static void __iomem *pcie_base;
101 +static struct reset_control *rstpcie0;
103 +static inline void bridge_w32(u32 val, unsigned reg)
105 + iowrite32(val, bridge_base + reg);
108 +static inline u32 bridge_r32(unsigned reg)
110 + return ioread32(bridge_base + reg);
113 +static inline void pcie_w32(u32 val, unsigned reg)
115 + iowrite32(val, pcie_base + reg);
118 +static inline u32 pcie_r32(unsigned reg)
120 + return ioread32(pcie_base + reg);
123 +static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
125 + u32 val = pcie_r32(reg);
129 + pcie_w32(val, reg);
132 +static int wait_pciephy_busy(void)
134 + unsigned long reg_value = 0x0, retry = 0;
137 + reg_value = pcie_r32(PCIEPHY0_CFG);
139 + if (reg_value & BUSY)
143 + if (retry++ > WAITRETRY_MAX){
144 + printk("PCIE-PHY retry failed.\n");
151 +static void pcie_phy(unsigned long addr, unsigned long val)
153 + wait_pciephy_busy();
154 + pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
156 + wait_pciephy_busy();
159 +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
161 + unsigned int slot = PCI_SLOT(devfn);
162 + u8 func = PCI_FUNC(devfn);
170 + address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
171 + bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
172 + data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
176 + *val = (data >> ((where & 3) << 3)) & 0xff;
179 + *val = (data >> ((where & 3) << 3)) & 0xffff;
186 + return PCIBIOS_SUCCESSFUL;
189 +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
191 + unsigned int slot = PCI_SLOT(devfn);
192 + u8 func = PCI_FUNC(devfn);
200 + address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
201 + bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
202 + data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
206 + data = (data & ~(0xff << ((where & 3) << 3))) |
207 + (val << ((where & 3) << 3));
210 + data = (data & ~(0xffff << ((where & 3) << 3))) |
211 + (val << ((where & 3) << 3));
218 + bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
220 + return PCIBIOS_SUCCESSFUL;
223 +struct pci_ops mt7620_pci_ops= {
224 + .read = pci_config_read,
225 + .write = pci_config_write,
228 +static struct resource mt7620_res_pci_mem1;
229 +static struct resource mt7620_res_pci_io1;
230 +struct pci_controller mt7620_controller = {
231 + .pci_ops = &mt7620_pci_ops,
232 + .mem_resource = &mt7620_res_pci_mem1,
233 + .mem_offset = 0x00000000UL,
234 + .io_resource = &mt7620_res_pci_io1,
235 + .io_offset = 0x00000000UL,
236 + .io_map_base = 0xa0000000,
239 +static int mt7620_pci_hw_init(struct platform_device *pdev) {
240 + /* PCIE: bypass PCIe DLL */
241 + pcie_phy(0x0, 0x80);
242 + pcie_phy(0x1, 0x04);
244 + /* PCIE: Elastic buffer control */
245 + pcie_phy(0x68, 0xB4);
247 + pcie_m32(0, BIT(1), RALINK_PCI_PCICFG_ADDR);
249 + reset_control_assert(rstpcie0);
251 + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
252 + rt_sysc_m32(BIT(19), BIT(31), PPLL_DRV);
254 + reset_control_deassert(rstpcie0);
255 + rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
259 + if (!(rt_sysc_r32(PPLL_CFG1) & BIT(23))) {
260 + dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
261 + reset_control_assert(rstpcie0);
262 + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
265 + rt_sysc_m32(BIT(18) | BIT(17), BIT(19) | BIT(31), PPLL_DRV);
270 +static int mt7628_pci_hw_init(struct platform_device *pdev) {
273 + rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
274 + reset_control_deassert(rstpcie0);
275 + rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
278 + pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
280 + pci_config_read(NULL, 0, 0x70c, 4, &val);
281 + val &= ~(0xff) << 8;
283 + pci_config_write(NULL, 0, 0x70c, 4, val);
285 + pci_config_read(NULL, 0, 0x70c, 4, &val);
286 + dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
291 +static int mt7620_pci_probe(struct platform_device *pdev)
293 + struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
294 + struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
297 + rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
298 + if (IS_ERR(rstpcie0))
299 + return PTR_ERR(rstpcie0);
301 + bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
305 + pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
309 + iomem_resource.start = 0;
310 + iomem_resource.end = ~0;
311 + ioport_resource.start = 0;
312 + ioport_resource.end = ~0;
314 + /* bring up the pci core */
315 + switch (ralink_soc) {
316 + case MT762X_SOC_MT7620A:
317 + if (mt7620_pci_hw_init(pdev))
321 + case MT762X_SOC_MT7628AN:
322 + if (mt7628_pci_hw_init(pdev))
327 + dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
332 + /* enable write access */
333 + pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
336 + /* check if there is a card present */
337 + if ((pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
338 + reset_control_assert(rstpcie0);
339 + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
340 + if (ralink_soc == MT762X_SOC_MT7620A)
341 + rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
342 + dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
347 + bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
348 + bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
350 + pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
351 + pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
352 + pcie_w32(0x06040001, RALINK_PCI0_CLASS);
354 + /* enable interrupts */
355 + pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
357 + /* voodoo from the SDK driver */
358 + pci_config_read(NULL, 0, 4, 4, &val);
359 + pci_config_write(NULL, 0, 4, 4, val | 0x7);
361 + pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
362 + register_pci_controller(&mt7620_controller);
367 +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
373 + if ((dev->bus->number == 0) && (slot == 0)) {
374 + pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
375 + pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
376 + pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
377 + } else if ((dev->bus->number == 1) && (slot == 0x0)) {
378 + irq = RALINK_INT_PCIE0;
380 + dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
383 + dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", dev->bus->number, slot, irq);
385 + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
386 + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
387 + pci_read_config_word(dev, PCI_COMMAND, &cmd);
390 + cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
391 + pci_write_config_word(dev, PCI_COMMAND, cmd);
392 + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
393 + //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
398 +int pcibios_plat_dev_init(struct pci_dev *dev)
403 +static const struct of_device_id mt7620_pci_ids[] = {
404 + { .compatible = "mediatek,mt7620-pci" },
407 +MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
409 +static struct platform_driver mt7620_pci_driver = {
410 + .probe = mt7620_pci_probe,
412 + .name = "mt7620-pci",
413 + .owner = THIS_MODULE,
414 + .of_match_table = of_match_ptr(mt7620_pci_ids),
418 +static int __init mt7620_pci_init(void)
420 + return platform_driver_register(&mt7620_pci_driver);
423 +arch_initcall(mt7620_pci_init);
424 --- a/arch/mips/ralink/Kconfig
425 +++ b/arch/mips/ralink/Kconfig
426 @@ -43,6 +43,7 @@ choice