target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch

   1 From a1c70ed831e4d5356618834202b0da3aa34e218e Mon Sep 17 00:00:00 2001
   2 From: Hans de Goede <hdegoede@redhat.com>
   3 Date: Fri, 10 Jan 2014 23:23:06 +0100
   4 Subject: [PATCH] ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
   5
   6 This add support for the A10-OLinuXino-LIME:
   7 https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME
   8
   9 A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB.
  10
  11 Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  12 ---
  13  arch/arm/boot/dts/Makefile                     |   1 +
  14  arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 111 +++++++++++++++++++++++++
  15  2 files changed, 112 insertions(+)
  16  create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
  17
  18 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
  19 index 8e1d636..66d6df3 100644
  20 --- a/arch/arm/boot/dts/Makefile
  21 +++ b/arch/arm/boot/dts/Makefile
  22 @@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
  23         sun4i-a10-cubieboard.dtb \
  24         sun4i-a10-mini-xplus.dtb \
  25         sun4i-a10-hackberry.dtb \
  26 +       sun4i-a10-olinuxino-lime.dtb \
  27         sun4i-a10-pcduino.dtb \
  28         sun5i-a10s-olinuxino-micro.dtb \
  29         sun5i-a13-olinuxino.dtb \
  30 diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
  31 new file mode 100644
  32 index 0000000..66cf0c7
  33 --- /dev/null
  34 +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
  35 @@ -0,0 +1,111 @@
  36 +/*
  37 + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
  38 + *
  39 + * The code contained herein is licensed under the GNU General Public
  40 + * License. You may obtain a copy of the GNU General Public License
  41 + * Version 2 or later at the following locations:
  42 + *
  43 + * http://www.opensource.org/licenses/gpl-license.html
  44 + * http://www.gnu.org/copyleft/gpl.html
  45 + */
  46 +
  47 +/dts-v1/;
  48 +/include/ "sun4i-a10.dtsi"
  49 +/include/ "sunxi-common-regulators.dtsi"
  50 +
  51 +/ {
  52 +       model = "Olimex A10-OLinuXino-LIME";
  53 +       compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
  54 +
  55 +       soc@01c00000 {
  56 +               emac: ethernet@01c0b000 {
  57 +                       pinctrl-names = "default";
  58 +                       pinctrl-0 = <&emac_pins_a>;
  59 +                       phy = <&phy1>;
  60 +                       status = "okay";
  61 +               };
  62 +
  63 +               mdio@01c0b080 {
  64 +                       status = "okay";
  65 +
  66 +                       phy1: ethernet-phy@1 {
  67 +                               reg = <1>;
  68 +                       };
  69 +               };
  70 +
  71 +               usbphy: phy@01c13400 {
  72 +                       usb1_vbus-supply = <&reg_usb1_vbus>;
  73 +                       usb2_vbus-supply = <&reg_usb2_vbus>;
  74 +                       status = "okay";
  75 +               };
  76 +
  77 +               ehci0: usb@01c14000 {
  78 +                       status = "okay";
  79 +               };
  80 +
  81 +               ohci0: usb@01c14400 {
  82 +                       status = "okay";
  83 +               };
  84 +
  85 +               ahci: sata@01c18000 {
  86 +                       target-supply = <&reg_ahci_5v>;
  87 +                       status = "okay";
  88 +               };
  89 +
  90 +               ehci1: usb@01c1c000 {
  91 +                       status = "okay";
  92 +               };
  93 +
  94 +               ohci1: usb@01c1c400 {
  95 +                       status = "okay";
  96 +               };
  97 +
  98 +               pinctrl@01c20800 {
  99 +                       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 100 +                               allwinner,pins = "PC3";
 101 +                               allwinner,function = "gpio_out";
 102 +                               allwinner,drive = <0>;
 103 +                               allwinner,pull = <0>;
 104 +                       };
 105 +
 106 +                       led_pins_olinuxinolime: led_pins@0 {
 107 +                               allwinner,pins = "PH2";
 108 +                               allwinner,function = "gpio_out";
 109 +                               allwinner,drive = <1>;
 110 +                               allwinner,pull = <0>;
 111 +                       };
 112 +               };
 113 +
 114 +               uart0: serial@01c28000 {
 115 +                       pinctrl-names = "default";
 116 +                       pinctrl-0 = <&uart0_pins_a>;
 117 +                       status = "okay";
 118 +               };
 119 +       };
 120 +
 121 +       leds {
 122 +               compatible = "gpio-leds";
 123 +               pinctrl-names = "default";
 124 +               pinctrl-0 = <&led_pins_olinuxinolime>;
 125 +
 126 +               green {
 127 +                       label = "a10-olinuxino-lime:green:usr";
 128 +                       gpios = <&pio 7 2 0>;
 129 +                       default-state = "on";
 130 +               };
 131 +       };
 132 +
 133 +       reg_ahci_5v: ahci-5v {
 134 +               pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
 135 +               gpio = <&pio 2 3 0>;
 136 +               status = "okay";
 137 +       };
 138 +
 139 +       reg_usb1_vbus: usb1-vbus {
 140 +               status = "okay";
 141 +       };
 142 +
 143 +       reg_usb2_vbus: usb2-vbus {
 144 +               status = "okay";
 145 +       };
 146 +};
 147 --
 148 2.0.3
 149