2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 uint32_t soft_ver_compat_level
;
81 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
82 const char *first_sysupgrade_partition
;
83 const char *last_sysupgrade_partition
;
86 /** The content of the soft-version structure */
87 struct __attribute__((__packed__
)) soft_version
{
91 uint8_t version_major
;
92 uint8_t version_minor
;
93 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the EAP225-Wall v2 */
1303 .id
= "EAP225-WALL-V2",
1306 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1307 .support_trail
= '\xff',
1309 .soft_ver_compat_level
= 1,
1312 {"fs-uboot", 0x00000, 0x20000},
1313 {"partition-table", 0x20000, 0x02000},
1314 {"default-mac", 0x30000, 0x01000},
1315 {"support-list", 0x31000, 0x00100},
1316 {"product-info", 0x31100, 0x00400},
1317 {"soft-version", 0x32000, 0x00100},
1318 {"firmware", 0x40000, 0xd80000},
1319 {"user-config", 0xdc0000, 0x30000},
1320 {"mutil-log", 0xf30000, 0x80000},
1321 {"oops", 0xfb0000, 0x40000},
1322 {"radio", 0xff0000, 0x10000},
1326 .first_sysupgrade_partition
= "os-image",
1327 .last_sysupgrade_partition
= "file-system"
1330 /** Firmware layout for the EAP245 v3 */
1335 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1336 .support_trail
= '\xff',
1338 .soft_ver_compat_level
= 1,
1340 /** Firmware partition with dynamic kernel/rootfs split */
1342 {"factroy-boot", 0x00000, 0x40000},
1343 {"fs-uboot", 0x40000, 0x40000},
1344 {"partition-table", 0x80000, 0x10000},
1345 {"default-mac", 0x90000, 0x01000},
1346 {"support-list", 0x91000, 0x00100},
1347 {"product-info", 0x91100, 0x00400},
1348 {"soft-version", 0x92000, 0x00100},
1349 {"radio", 0xa0000, 0x10000},
1350 {"extra-para", 0xb0000, 0x10000},
1351 {"firmware", 0xc0000, 0xe40000},
1352 {"config", 0xf00000, 0x30000},
1353 {"mutil-log", 0xf30000, 0x80000},
1354 {"oops", 0xfb0000, 0x40000},
1358 .first_sysupgrade_partition
= "os-image",
1359 .last_sysupgrade_partition
= "file-system"
1362 /** Firmware layout for the TL-WA850RE v2 */
1364 .id
= "TLWA850REV2",
1368 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1369 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1370 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1371 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1372 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1373 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1374 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1375 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1376 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1377 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1378 .support_trail
= '\x00',
1382 576KB were moved from file-system to os-image
1383 in comparison to the stock image
1386 {"fs-uboot", 0x00000, 0x20000},
1387 {"firmware", 0x20000, 0x390000},
1388 {"partition-table", 0x3b0000, 0x02000},
1389 {"default-mac", 0x3c0000, 0x00020},
1390 {"pin", 0x3c0100, 0x00020},
1391 {"product-info", 0x3c1000, 0x01000},
1392 {"soft-version", 0x3c2000, 0x00100},
1393 {"support-list", 0x3c3000, 0x01000},
1394 {"profile", 0x3c4000, 0x08000},
1395 {"user-config", 0x3d0000, 0x10000},
1396 {"default-config", 0x3e0000, 0x10000},
1397 {"radio", 0x3f0000, 0x10000},
1401 .first_sysupgrade_partition
= "os-image",
1402 .last_sysupgrade_partition
= "file-system"
1405 /** Firmware layout for the TL-WA855RE v1 */
1407 .id
= "TLWA855REV1",
1411 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1412 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1413 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1414 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1415 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1416 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1417 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1418 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1419 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1420 .support_trail
= '\x00',
1424 {"fs-uboot", 0x00000, 0x20000},
1425 {"os-image", 0x20000, 0x150000},
1426 {"file-system", 0x170000, 0x240000},
1427 {"partition-table", 0x3b0000, 0x02000},
1428 {"default-mac", 0x3c0000, 0x00020},
1429 {"pin", 0x3c0100, 0x00020},
1430 {"product-info", 0x3c1000, 0x01000},
1431 {"soft-version", 0x3c2000, 0x00100},
1432 {"support-list", 0x3c3000, 0x01000},
1433 {"profile", 0x3c4000, 0x08000},
1434 {"user-config", 0x3d0000, 0x10000},
1435 {"default-config", 0x3e0000, 0x10000},
1436 {"radio", 0x3f0000, 0x10000},
1440 .first_sysupgrade_partition
= "os-image",
1441 .last_sysupgrade_partition
= "file-system"
1444 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1446 .id
= "TL-WPA8630P-V2.0-EU",
1450 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1451 .support_trail
= '\x00',
1455 {"factory-uboot", 0x00000, 0x20000},
1456 {"fs-uboot", 0x20000, 0x20000},
1457 {"firmware", 0x40000, 0x5e0000},
1458 {"partition-table", 0x620000, 0x02000},
1459 {"default-mac", 0x630000, 0x00020},
1460 {"pin", 0x630100, 0x00020},
1461 {"device-id", 0x630200, 0x00030},
1462 {"product-info", 0x631100, 0x01000},
1463 {"extra-para", 0x632100, 0x01000},
1464 {"soft-version", 0x640000, 0x01000},
1465 {"support-list", 0x641000, 0x01000},
1466 {"profile", 0x642000, 0x08000},
1467 {"user-config", 0x650000, 0x10000},
1468 {"default-config", 0x660000, 0x10000},
1469 {"default-nvm", 0x670000, 0xc0000},
1470 {"default-pib", 0x730000, 0x40000},
1471 {"radio", 0x7f0000, 0x10000},
1475 .first_sysupgrade_partition
= "os-image",
1476 .last_sysupgrade_partition
= "file-system"
1479 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1481 .id
= "TL-WPA8630P-V2-INT",
1485 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1486 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1487 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1488 .support_trail
= '\x00',
1492 {"factory-uboot", 0x00000, 0x20000},
1493 {"fs-uboot", 0x20000, 0x20000},
1494 {"firmware", 0x40000, 0x5e0000},
1495 {"partition-table", 0x620000, 0x02000},
1496 {"extra-para", 0x632100, 0x01000},
1497 {"soft-version", 0x640000, 0x01000},
1498 {"support-list", 0x641000, 0x01000},
1499 {"profile", 0x642000, 0x08000},
1500 {"user-config", 0x650000, 0x10000},
1501 {"default-config", 0x660000, 0x10000},
1502 {"default-nvm", 0x670000, 0xc0000},
1503 {"default-pib", 0x730000, 0x40000},
1504 {"default-mac", 0x7e0000, 0x00020},
1505 {"pin", 0x7e0100, 0x00020},
1506 {"device-id", 0x7e0200, 0x00030},
1507 {"product-info", 0x7e1100, 0x01000},
1508 {"radio", 0x7f0000, 0x10000},
1512 .first_sysupgrade_partition
= "os-image",
1513 .last_sysupgrade_partition
= "file-system"
1516 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1518 .id
= "TL-WPA8630P-V2.1-EU",
1522 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1523 .support_trail
= '\x00',
1527 {"factory-uboot", 0x00000, 0x20000},
1528 {"fs-uboot", 0x20000, 0x20000},
1529 {"firmware", 0x40000, 0x5e0000},
1530 {"extra-para", 0x680000, 0x01000},
1531 {"product-info", 0x690000, 0x01000},
1532 {"partition-table", 0x6a0000, 0x02000},
1533 {"soft-version", 0x6b0000, 0x01000},
1534 {"support-list", 0x6b1000, 0x01000},
1535 {"profile", 0x6b2000, 0x08000},
1536 {"user-config", 0x6c0000, 0x10000},
1537 {"default-config", 0x6d0000, 0x10000},
1538 {"default-nvm", 0x6e0000, 0xc0000},
1539 {"default-pib", 0x7a0000, 0x40000},
1540 {"default-mac", 0x7e0000, 0x00020},
1541 {"pin", 0x7e0100, 0x00020},
1542 {"device-id", 0x7e0200, 0x00030},
1543 {"radio", 0x7f0000, 0x10000},
1547 .first_sysupgrade_partition
= "os-image",
1548 .last_sysupgrade_partition
= "file-system"
1551 /** Firmware layout for the TL-WR1043 v5 */
1553 .id
= "TLWR1043NV5",
1557 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1558 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1559 .support_trail
= '\x00',
1560 .soft_ver
= "soft_ver:1.0.0\n",
1562 {"factory-boot", 0x00000, 0x20000},
1563 {"fs-uboot", 0x20000, 0x20000},
1564 {"firmware", 0x40000, 0xec0000},
1565 {"default-mac", 0xf00000, 0x00200},
1566 {"pin", 0xf00200, 0x00200},
1567 {"device-id", 0xf00400, 0x00100},
1568 {"product-info", 0xf00500, 0x0fb00},
1569 {"soft-version", 0xf10000, 0x01000},
1570 {"extra-para", 0xf11000, 0x01000},
1571 {"support-list", 0xf12000, 0x0a000},
1572 {"profile", 0xf1c000, 0x04000},
1573 {"default-config", 0xf20000, 0x10000},
1574 {"user-config", 0xf30000, 0x40000},
1575 {"qos-db", 0xf70000, 0x40000},
1576 {"certificate", 0xfb0000, 0x10000},
1577 {"partition-table", 0xfc0000, 0x10000},
1578 {"log", 0xfd0000, 0x20000},
1579 {"radio", 0xff0000, 0x10000},
1582 .first_sysupgrade_partition
= "os-image",
1583 .last_sysupgrade_partition
= "file-system"
1586 /** Firmware layout for the TL-WR1043 v4 */
1588 .id
= "TLWR1043NDV4",
1592 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1593 .support_trail
= '\x00',
1596 /* We're using a dynamic kernel/rootfs split here */
1598 {"fs-uboot", 0x00000, 0x20000},
1599 {"firmware", 0x20000, 0xf30000},
1600 {"default-mac", 0xf50000, 0x00200},
1601 {"pin", 0xf50200, 0x00200},
1602 {"product-info", 0xf50400, 0x0fc00},
1603 {"soft-version", 0xf60000, 0x0b000},
1604 {"support-list", 0xf6b000, 0x04000},
1605 {"profile", 0xf70000, 0x04000},
1606 {"default-config", 0xf74000, 0x0b000},
1607 {"user-config", 0xf80000, 0x40000},
1608 {"partition-table", 0xfc0000, 0x10000},
1609 {"log", 0xfd0000, 0x20000},
1610 {"radio", 0xff0000, 0x10000},
1614 .first_sysupgrade_partition
= "os-image",
1615 .last_sysupgrade_partition
= "file-system"
1618 /** Firmware layout for the TL-WR902AC v1 */
1620 .id
= "TL-WR902AC-V1",
1624 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1625 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1626 .support_trail
= '\x00',
1630 384KB were moved from file-system to os-image
1631 in comparison to the stock image
1634 {"fs-uboot", 0x00000, 0x20000},
1635 {"firmware", 0x20000, 0x730000},
1636 {"default-mac", 0x750000, 0x00200},
1637 {"pin", 0x750200, 0x00200},
1638 {"product-info", 0x750400, 0x0fc00},
1639 {"soft-version", 0x760000, 0x0b000},
1640 {"support-list", 0x76b000, 0x04000},
1641 {"profile", 0x770000, 0x04000},
1642 {"default-config", 0x774000, 0x0b000},
1643 {"user-config", 0x780000, 0x40000},
1644 {"partition-table", 0x7c0000, 0x10000},
1645 {"log", 0x7d0000, 0x20000},
1646 {"radio", 0x7f0000, 0x10000},
1650 .first_sysupgrade_partition
= "os-image",
1651 .last_sysupgrade_partition
= "file-system",
1654 /** Firmware layout for the TL-WR942N V1 */
1660 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1661 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1662 .support_trail
= '\x00',
1666 {"fs-uboot", 0x00000, 0x20000},
1667 {"firmware", 0x20000, 0xe20000},
1668 {"default-mac", 0xe40000, 0x00200},
1669 {"pin", 0xe40200, 0x00200},
1670 {"product-info", 0xe40400, 0x0fc00},
1671 {"partition-table", 0xe50000, 0x10000},
1672 {"soft-version", 0xe60000, 0x10000},
1673 {"support-list", 0xe70000, 0x10000},
1674 {"profile", 0xe80000, 0x10000},
1675 {"default-config", 0xe90000, 0x10000},
1676 {"user-config", 0xea0000, 0x40000},
1677 {"qos-db", 0xee0000, 0x40000},
1678 {"certificate", 0xf20000, 0x10000},
1679 {"usb-config", 0xfb0000, 0x10000},
1680 {"log", 0xfc0000, 0x20000},
1681 {"radio-bk", 0xfe0000, 0x10000},
1682 {"radio", 0xff0000, 0x10000},
1686 .first_sysupgrade_partition
= "os-image",
1687 .last_sysupgrade_partition
= "file-system",
1690 /** Firmware layout for the RE200 v2 */
1696 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1697 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1698 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1699 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1700 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1701 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1702 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1703 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1704 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1705 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1706 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1707 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1708 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1709 .support_trail
= '\x00',
1713 {"fs-uboot", 0x00000, 0x20000},
1714 {"firmware", 0x20000, 0x7a0000},
1715 {"partition-table", 0x7c0000, 0x02000},
1716 {"default-mac", 0x7c2000, 0x00020},
1717 {"pin", 0x7c2100, 0x00020},
1718 {"product-info", 0x7c3100, 0x01000},
1719 {"soft-version", 0x7c4200, 0x01000},
1720 {"support-list", 0x7c5200, 0x01000},
1721 {"profile", 0x7c6200, 0x08000},
1722 {"config-info", 0x7ce200, 0x00400},
1723 {"user-config", 0x7d0000, 0x10000},
1724 {"default-config", 0x7e0000, 0x10000},
1725 {"radio", 0x7f0000, 0x10000},
1729 .first_sysupgrade_partition
= "os-image",
1730 .last_sysupgrade_partition
= "file-system"
1733 /** Firmware layout for the RE200 v3 */
1739 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1740 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1741 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1742 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1743 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1744 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1745 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1746 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1747 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1748 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1749 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1750 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1751 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1752 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1753 .support_trail
= '\x00',
1757 {"fs-uboot", 0x00000, 0x20000},
1758 {"firmware", 0x20000, 0x7a0000},
1759 {"partition-table", 0x7c0000, 0x02000},
1760 {"default-mac", 0x7c2000, 0x00020},
1761 {"pin", 0x7c2100, 0x00020},
1762 {"product-info", 0x7c3100, 0x01000},
1763 {"soft-version", 0x7c4200, 0x01000},
1764 {"support-list", 0x7c5200, 0x01000},
1765 {"profile", 0x7c6200, 0x08000},
1766 {"config-info", 0x7ce200, 0x00400},
1767 {"user-config", 0x7d0000, 0x10000},
1768 {"default-config", 0x7e0000, 0x10000},
1769 {"radio", 0x7f0000, 0x10000},
1773 .first_sysupgrade_partition
= "os-image",
1774 .last_sysupgrade_partition
= "file-system"
1777 /** Firmware layout for the RE200 v4 */
1783 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1784 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1785 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1786 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1787 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
1788 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
1789 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
1790 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
1791 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
1792 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
1793 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
1794 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
1795 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
1796 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
1797 .support_trail
= '\x00',
1798 .soft_ver
= "soft_ver:1.1.0\n",
1801 {"fs-uboot", 0x00000, 0x20000},
1802 {"firmware", 0x20000, 0x7a0000},
1803 {"partition-table", 0x7c0000, 0x02000},
1804 {"default-mac", 0x7c2000, 0x00020},
1805 {"pin", 0x7c2100, 0x00020},
1806 {"product-info", 0x7c3100, 0x01000},
1807 {"soft-version", 0x7c4200, 0x01000},
1808 {"support-list", 0x7c5200, 0x01000},
1809 {"profile", 0x7c6200, 0x08000},
1810 {"config-info", 0x7ce200, 0x00400},
1811 {"user-config", 0x7d0000, 0x10000},
1812 {"default-config", 0x7e0000, 0x10000},
1813 {"radio", 0x7f0000, 0x10000},
1817 .first_sysupgrade_partition
= "os-image",
1818 .last_sysupgrade_partition
= "file-system"
1821 /** Firmware layout for the RE220 v2 */
1827 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1828 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1829 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1830 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1831 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1832 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1833 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1834 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1835 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1836 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1837 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1838 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1839 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1840 .support_trail
= '\x00',
1844 {"fs-uboot", 0x00000, 0x20000},
1845 {"firmware", 0x20000, 0x7a0000},
1846 {"partition-table", 0x7c0000, 0x02000},
1847 {"default-mac", 0x7c2000, 0x00020},
1848 {"pin", 0x7c2100, 0x00020},
1849 {"product-info", 0x7c3100, 0x01000},
1850 {"soft-version", 0x7c4200, 0x01000},
1851 {"support-list", 0x7c5200, 0x01000},
1852 {"profile", 0x7c6200, 0x08000},
1853 {"config-info", 0x7ce200, 0x00400},
1854 {"user-config", 0x7d0000, 0x10000},
1855 {"default-config", 0x7e0000, 0x10000},
1856 {"radio", 0x7f0000, 0x10000},
1860 .first_sysupgrade_partition
= "os-image",
1861 .last_sysupgrade_partition
= "file-system"
1864 /** Firmware layout for the RE305 v1 */
1870 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1871 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1872 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1873 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1874 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1875 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1876 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1877 .support_trail
= '\x00',
1881 {"fs-uboot", 0x00000, 0x20000},
1882 {"firmware", 0x20000, 0x5e0000},
1883 {"partition-table", 0x600000, 0x02000},
1884 {"default-mac", 0x610000, 0x00020},
1885 {"pin", 0x610100, 0x00020},
1886 {"product-info", 0x611100, 0x01000},
1887 {"soft-version", 0x620000, 0x01000},
1888 {"support-list", 0x621000, 0x01000},
1889 {"profile", 0x622000, 0x08000},
1890 {"user-config", 0x630000, 0x10000},
1891 {"default-config", 0x640000, 0x10000},
1892 {"radio", 0x7f0000, 0x10000},
1896 .first_sysupgrade_partition
= "os-image",
1897 .last_sysupgrade_partition
= "file-system"
1900 /** Firmware layout for the RE350 v1 */
1906 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1907 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1908 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1909 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1910 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1911 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1912 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1913 .support_trail
= '\x00',
1916 /** We're using a dynamic kernel/rootfs split here */
1918 {"fs-uboot", 0x00000, 0x20000},
1919 {"firmware", 0x20000, 0x5e0000},
1920 {"partition-table", 0x600000, 0x02000},
1921 {"default-mac", 0x610000, 0x00020},
1922 {"pin", 0x610100, 0x00020},
1923 {"product-info", 0x611100, 0x01000},
1924 {"soft-version", 0x620000, 0x01000},
1925 {"support-list", 0x621000, 0x01000},
1926 {"profile", 0x622000, 0x08000},
1927 {"user-config", 0x630000, 0x10000},
1928 {"default-config", 0x640000, 0x10000},
1929 {"radio", 0x7f0000, 0x10000},
1933 .first_sysupgrade_partition
= "os-image",
1934 .last_sysupgrade_partition
= "file-system"
1937 /** Firmware layout for the RE350K v1 */
1943 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1944 .support_trail
= '\x00',
1947 /** We're using a dynamic kernel/rootfs split here */
1949 {"fs-uboot", 0x00000, 0x20000},
1950 {"firmware", 0x20000, 0xd70000},
1951 {"partition-table", 0xd90000, 0x02000},
1952 {"default-mac", 0xda0000, 0x00020},
1953 {"pin", 0xda0100, 0x00020},
1954 {"product-info", 0xda1100, 0x01000},
1955 {"soft-version", 0xdb0000, 0x01000},
1956 {"support-list", 0xdb1000, 0x01000},
1957 {"profile", 0xdb2000, 0x08000},
1958 {"user-config", 0xdc0000, 0x10000},
1959 {"default-config", 0xdd0000, 0x10000},
1960 {"device-id", 0xde0000, 0x00108},
1961 {"radio", 0xff0000, 0x10000},
1965 .first_sysupgrade_partition
= "os-image",
1966 .last_sysupgrade_partition
= "file-system"
1969 /** Firmware layout for the RE355 */
1975 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1976 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1977 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1978 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1979 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1980 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1981 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1982 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1983 .support_trail
= '\x00',
1986 /* We're using a dynamic kernel/rootfs split here */
1988 {"fs-uboot", 0x00000, 0x20000},
1989 {"firmware", 0x20000, 0x5e0000},
1990 {"partition-table", 0x600000, 0x02000},
1991 {"default-mac", 0x610000, 0x00020},
1992 {"pin", 0x610100, 0x00020},
1993 {"product-info", 0x611100, 0x01000},
1994 {"soft-version", 0x620000, 0x01000},
1995 {"support-list", 0x621000, 0x01000},
1996 {"profile", 0x622000, 0x08000},
1997 {"user-config", 0x630000, 0x10000},
1998 {"default-config", 0x640000, 0x10000},
1999 {"radio", 0x7f0000, 0x10000},
2003 .first_sysupgrade_partition
= "os-image",
2004 .last_sysupgrade_partition
= "file-system"
2007 /** Firmware layout for the RE450 */
2013 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2014 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2015 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2016 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2017 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2018 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2019 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2020 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2021 .support_trail
= '\x00',
2024 /** We're using a dynamic kernel/rootfs split here */
2026 {"fs-uboot", 0x00000, 0x20000},
2027 {"firmware", 0x20000, 0x5e0000},
2028 {"partition-table", 0x600000, 0x02000},
2029 {"default-mac", 0x610000, 0x00020},
2030 {"pin", 0x610100, 0x00020},
2031 {"product-info", 0x611100, 0x01000},
2032 {"soft-version", 0x620000, 0x01000},
2033 {"support-list", 0x621000, 0x01000},
2034 {"profile", 0x622000, 0x08000},
2035 {"user-config", 0x630000, 0x10000},
2036 {"default-config", 0x640000, 0x10000},
2037 {"radio", 0x7f0000, 0x10000},
2041 .first_sysupgrade_partition
= "os-image",
2042 .last_sysupgrade_partition
= "file-system"
2045 /** Firmware layout for the RE450 v2 */
2051 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2052 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2053 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2054 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2055 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2056 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2057 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2058 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2059 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2060 .support_trail
= '\x00',
2063 /* We're using a dynamic kernel/rootfs split here */
2065 {"fs-uboot", 0x00000, 0x20000},
2066 {"firmware", 0x20000, 0x5e0000},
2067 {"partition-table", 0x600000, 0x02000},
2068 {"default-mac", 0x610000, 0x00020},
2069 {"pin", 0x610100, 0x00020},
2070 {"product-info", 0x611100, 0x01000},
2071 {"soft-version", 0x620000, 0x01000},
2072 {"support-list", 0x621000, 0x01000},
2073 {"profile", 0x622000, 0x08000},
2074 {"user-config", 0x630000, 0x10000},
2075 {"default-config", 0x640000, 0x10000},
2076 {"radio", 0x7f0000, 0x10000},
2080 .first_sysupgrade_partition
= "os-image",
2081 .last_sysupgrade_partition
= "file-system"
2084 /** Firmware layout for the RE450 v3 */
2090 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2091 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2092 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2093 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2094 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2095 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2096 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2097 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2098 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2099 .support_trail
= '\x00',
2102 /* We're using a dynamic kernel/rootfs split here */
2104 {"fs-uboot", 0x00000, 0x20000},
2105 {"default-mac", 0x20000, 0x00020},
2106 {"pin", 0x20020, 0x00020},
2107 {"product-info", 0x21000, 0x01000},
2108 {"partition-table", 0x22000, 0x02000},
2109 {"soft-version", 0x24000, 0x01000},
2110 {"support-list", 0x25000, 0x01000},
2111 {"profile", 0x26000, 0x08000},
2112 {"user-config", 0x2e000, 0x10000},
2113 {"default-config", 0x3e000, 0x10000},
2114 {"config-info", 0x4e000, 0x00400},
2115 {"firmware", 0x50000, 0x7a0000},
2116 {"radio", 0x7f0000, 0x10000},
2120 .first_sysupgrade_partition
= "os-image",
2121 .last_sysupgrade_partition
= "file-system"
2124 /** Firmware layout for the RE500 */
2130 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2131 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2132 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2133 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2134 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2135 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2136 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2137 .support_trail
= '\x00',
2140 /* We're using a dynamic kernel/rootfs split here */
2142 {"fs-uboot", 0x00000, 0x20000},
2143 {"firmware", 0x20000, 0xde0000},
2144 {"partition-table", 0xe00000, 0x02000},
2145 {"default-mac", 0xe10000, 0x00020},
2146 {"pin", 0xe10100, 0x00020},
2147 {"product-info", 0xe11100, 0x01000},
2148 {"soft-version", 0xe20000, 0x01000},
2149 {"support-list", 0xe21000, 0x01000},
2150 {"profile", 0xe22000, 0x08000},
2151 {"user-config", 0xe30000, 0x10000},
2152 {"default-config", 0xe40000, 0x10000},
2153 {"radio", 0xff0000, 0x10000},
2157 .first_sysupgrade_partition
= "os-image",
2158 .last_sysupgrade_partition
= "file-system"
2161 /** Firmware layout for the RE650 */
2167 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2168 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2169 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2170 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2171 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2172 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2173 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2174 .support_trail
= '\x00',
2177 /* We're using a dynamic kernel/rootfs split here */
2179 {"fs-uboot", 0x00000, 0x20000},
2180 {"firmware", 0x20000, 0xde0000},
2181 {"partition-table", 0xe00000, 0x02000},
2182 {"default-mac", 0xe10000, 0x00020},
2183 {"pin", 0xe10100, 0x00020},
2184 {"product-info", 0xe11100, 0x01000},
2185 {"soft-version", 0xe20000, 0x01000},
2186 {"support-list", 0xe21000, 0x01000},
2187 {"profile", 0xe22000, 0x08000},
2188 {"user-config", 0xe30000, 0x10000},
2189 {"default-config", 0xe40000, 0x10000},
2190 {"radio", 0xff0000, 0x10000},
2194 .first_sysupgrade_partition
= "os-image",
2195 .last_sysupgrade_partition
= "file-system"
2201 #define error(_ret, _errno, _str, ...) \
2203 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2204 strerror(_errno)); \
2210 /** Stores a uint32 as big endian */
2211 static inline void put32(uint8_t *buf
, uint32_t val
) {
2218 /** Allocates a new image partition */
2219 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2220 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2222 error(1, errno
, "malloc");
2227 /** Frees an image partition */
2228 static void free_image_partition(struct image_partition_entry entry
) {
2232 static time_t source_date_epoch
= -1;
2233 static void set_source_date_epoch() {
2234 char *env
= getenv("SOURCE_DATE_EPOCH");
2238 source_date_epoch
= strtoull(env
, &endptr
, 10);
2239 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2240 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2246 /** Generates the partition-table partition */
2247 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2248 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2250 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2258 for (i
= 0; p
[i
].name
; i
++) {
2260 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2263 error(1, 0, "flash partition table overflow?");
2270 memset(s
, 0xff, end
-s
);
2276 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2277 static inline uint8_t bcd(uint8_t v
) {
2278 return 0x10 * (v
/10) + v
%10;
2282 /** Generates the soft-version partition */
2283 static struct image_partition_entry
make_soft_version(struct device_info
*info
, uint32_t rev
) {
2284 size_t part_len
= sizeof(struct soft_version
);
2285 if (info
->soft_ver_compat_level
> 0)
2286 part_len
+= sizeof(uint32_t);
2288 struct image_partition_entry entry
=
2289 alloc_image_partition("soft-version", part_len
+1);
2290 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2294 if (source_date_epoch
!= -1)
2295 t
= source_date_epoch
;
2296 else if (time(&t
) == (time_t)(-1))
2297 error(1, errno
, "time");
2299 struct tm
*tm
= gmtime(&t
);
2301 /* Partition contents size, minus 8 byte header and trailing byte */
2302 s
->data_len
= htonl(entry
.size
-9);
2306 s
->version_major
= 0;
2307 s
->version_minor
= 0;
2308 s
->version_patch
= 0;
2310 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2311 s
->year_lo
= bcd(tm
->tm_year
%100);
2312 s
->month
= bcd(tm
->tm_mon
+1);
2313 s
->day
= bcd(tm
->tm_mday
);
2314 s
->rev
= htonl(rev
);
2316 if (info
->soft_ver_compat_level
> 0)
2317 *(uint32_t *)(entry
.data
+ sizeof(struct soft_version
)) =
2318 htonl(info
->soft_ver_compat_level
);
2320 entry
.data
[entry
.size
-1] = 0xff;
2325 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2326 /** String length _including_ the terminating zero byte */
2327 uint32_t ver_len
= strlen(soft_ver
) + 1;
2328 /** Partition contains 64 bit header, the version string, and one additional null byte */
2329 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2330 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2332 uint32_t *len
= (uint32_t *)entry
.data
;
2333 len
[0] = htonl(ver_len
);
2335 memcpy(&len
[2], soft_ver
, ver_len
);
2337 entry
.data
[partition_len
- 1] = 0;
2342 /** Generates the support-list partition */
2343 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2344 size_t len
= strlen(info
->support_list
);
2345 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2347 put32(entry
.data
, len
);
2348 memset(entry
.data
+4, 0, 4);
2349 memcpy(entry
.data
+8, info
->support_list
, len
);
2350 entry
.data
[len
+8] = info
->support_trail
;
2355 /** Creates a new image partition with an arbitrary name from a file */
2356 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2357 struct stat statbuf
;
2359 if (stat(filename
, &statbuf
) < 0)
2360 error(1, errno
, "unable to stat file `%s'", filename
);
2362 size_t len
= statbuf
.st_size
;
2364 if (add_jffs2_eof
) {
2365 if (file_system_partition
)
2366 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2368 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2371 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2373 FILE *file
= fopen(filename
, "rb");
2375 error(1, errno
, "unable to open file `%s'", filename
);
2377 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2378 error(1, errno
, "unable to read file `%s'", filename
);
2380 if (add_jffs2_eof
) {
2381 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2383 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2384 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2392 /** Creates a new image partition from arbitrary data */
2393 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2395 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2397 memcpy(entry
.data
, datain
, len
);
2403 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2405 Example image partition table:
2407 fwup-ptn partition-table base 0x00800 size 0x00800
2408 fwup-ptn os-image base 0x01000 size 0x113b45
2409 fwup-ptn file-system base 0x114b45 size 0x1d0004
2410 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2412 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2413 the end of the partition table is marked with a zero byte.
2415 The firmware image must contain at least the partition-table and support-list partitions
2416 to be accepted. There aren't any alignment constraints for the image partitions.
2418 The partition-table partition contains the actual flash layout; partitions
2419 from the image partition table are mapped to the corresponding flash partitions during
2420 the firmware upgrade. The support-list partition contains a list of devices supported by
2423 The base offsets in the firmware partition table are relative to the end
2424 of the vendor information block, so the partition-table partition will
2425 actually start at offset 0x1814 of the image.
2427 I think partition-table must be the first partition in the firmware image.
2429 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2431 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2433 size_t base
= 0x800;
2434 for (i
= 0; parts
[i
].name
; i
++) {
2435 for (j
= 0; flash_parts
[j
].name
; j
++) {
2436 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2437 if (parts
[i
].size
> flash_parts
[j
].size
)
2438 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2443 assert(flash_parts
[j
].name
);
2445 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2447 size_t len
= end
-image_pt
;
2448 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2451 error(1, 0, "image partition table overflow?");
2455 base
+= parts
[i
].size
;
2459 /** Generates and writes the image MD5 checksum */
2460 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2464 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2465 MD5_Update(&ctx
, buffer
, len
);
2466 MD5_Final(md5
, &ctx
);
2471 Generates the firmware image in factory format
2477 0000-0003 Image size (4 bytes, big endian)
2478 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2479 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2480 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2481 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2482 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2483 1814-xxxx Firmware partitions
2485 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2489 for (i
= 0; parts
[i
].name
; i
++)
2490 *len
+= parts
[i
].size
;
2492 uint8_t *image
= malloc(*len
);
2494 error(1, errno
, "malloc");
2496 memset(image
, 0xff, *len
);
2500 size_t vendor_len
= strlen(info
->vendor
);
2501 put32(image
+0x14, vendor_len
);
2502 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2505 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2506 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2512 Generates the firmware image in sysupgrade format
2514 This makes some assumptions about the provided flash and image partition tables and
2515 should be generalized when TP-LINK starts building its safeloader into hardware with
2516 different flash layouts.
2518 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2520 size_t flash_first_partition_index
= 0;
2521 size_t flash_last_partition_index
= 0;
2522 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2523 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2524 const struct image_partition_entry
*image_last_partition
= NULL
;
2526 /** Find first and last partitions */
2527 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2528 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2529 flash_first_partition
= &info
->partitions
[i
];
2530 flash_first_partition_index
= i
;
2531 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2532 flash_last_partition
= &info
->partitions
[i
];
2533 flash_last_partition_index
= i
;
2537 assert(flash_first_partition
&& flash_last_partition
);
2538 assert(flash_first_partition_index
< flash_last_partition_index
);
2540 /** Find last partition from image to calculate needed size */
2541 for (i
= 0; image_parts
[i
].name
; i
++) {
2542 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2543 image_last_partition
= &image_parts
[i
];
2548 assert(image_last_partition
);
2550 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2552 uint8_t *image
= malloc(*len
);
2554 error(1, errno
, "malloc");
2556 memset(image
, 0xff, *len
);
2558 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2559 for (j
= 0; image_parts
[j
].name
; j
++) {
2560 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2561 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2562 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2563 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2567 assert(image_parts
[j
].name
);
2574 /** Generates an image according to a given layout and writes it to a file */
2575 static void build_image(const char *output
,
2576 const char *kernel_image
,
2577 const char *rootfs_image
,
2581 struct device_info
*info
) {
2585 struct image_partition_entry parts
[7] = {};
2587 struct flash_partition_entry
*firmware_partition
= NULL
;
2588 struct flash_partition_entry
*os_image_partition
= NULL
;
2589 struct flash_partition_entry
*file_system_partition
= NULL
;
2590 size_t firmware_partition_index
= 0;
2592 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2593 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2595 firmware_partition
= &info
->partitions
[i
];
2596 firmware_partition_index
= i
;
2600 if (firmware_partition
)
2602 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2603 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2606 if (stat(kernel_image
, &kernel
) < 0)
2607 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2609 if (kernel
.st_size
> firmware_partition
->size
)
2610 error(1, 0, "kernel overflowed firmware partition\n");
2612 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2613 info
->partitions
[i
+1] = info
->partitions
[i
];
2615 file_system_partition
->name
= "file-system";
2616 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2618 /* Align partition start to erase blocks for factory images only */
2620 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2622 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2624 os_image_partition
->name
= "os-image";
2625 os_image_partition
->size
= kernel
.st_size
;
2628 parts
[0] = make_partition_table(info
->partitions
);
2630 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2632 parts
[1] = make_soft_version(info
, rev
);
2634 parts
[2] = make_support_list(info
);
2635 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2636 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2638 /* Some devices need the extra-para partition to accept the firmware */
2639 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2640 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2641 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2642 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2643 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2644 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2645 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2646 parts
[5] = put_data("extra-para", mdat
, 11);
2647 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2648 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2649 parts
[5] = put_data("extra-para", mdat
, 11);
2650 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2651 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2652 parts
[5] = put_data("extra-para", mdat
, 11);
2653 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2654 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2655 parts
[5] = put_data("extra-para", mdat
, 11);
2656 } else if (strcasecmp(info
->id
, "EAP245-V3") == 0) {
2657 const char mdat
[10] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01};
2658 parts
[5] = put_data("extra-para", mdat
, 10);
2664 image
= generate_sysupgrade_image(info
, parts
, &len
);
2666 image
= generate_factory_image(info
, parts
, &len
);
2668 FILE *file
= fopen(output
, "wb");
2670 error(1, errno
, "unable to open output file");
2672 if (fwrite(image
, len
, 1, file
) != 1)
2673 error(1, 0, "unable to write output file");
2679 for (i
= 0; parts
[i
].name
; i
++)
2680 free_image_partition(parts
[i
]);
2684 static void usage(const char *argv0
) {
2686 "Usage: %s [OPTIONS...]\n"
2689 " -h show this help\n"
2691 "Create a new image:\n"
2692 " -B <board> create image for the board specified with <board>\n"
2693 " -k <file> read kernel image from the file <file>\n"
2694 " -r <file> read rootfs image from the file <file>\n"
2695 " -o <file> write output to the file <file>\n"
2696 " -V <rev> sets the revision number to <rev>\n"
2697 " -j add jffs2 end-of-filesystem markers\n"
2698 " -S create sysupgrade instead of factory image\n"
2699 "Extract an old image:\n"
2700 " -x <file> extract all oem firmware partition\n"
2701 " -d <dir> destination to extract the firmware partition\n"
2702 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2708 static struct device_info
*find_board(const char *id
)
2710 struct device_info
*board
= NULL
;
2712 for (board
= boards
; board
->id
!= NULL
; board
++)
2713 if (strcasecmp(id
, board
->id
) == 0)
2719 static int add_flash_partition(
2720 struct flash_partition_entry
*part_list
,
2727 /* check if the list has a free entry */
2728 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2729 if (part_list
->name
== NULL
&&
2730 part_list
->base
== 0 &&
2731 part_list
->size
== 0)
2735 if (ptr
== max_entries
) {
2736 error(1, 0, "No free flash part entry available.");
2739 part_list
->name
= calloc(1, strlen(name
) + 1);
2740 if (!part_list
->name
) {
2741 error(1, 0, "Unable to allocate memory");
2744 memcpy((char *)part_list
->name
, name
, strlen(name
));
2745 part_list
->base
= base
;
2746 part_list
->size
= size
;
2751 /** read the partition table into struct flash_partition_entry */
2752 static int read_partition_table(
2753 FILE *file
, long offset
,
2754 struct flash_partition_entry
*entries
, size_t max_entries
,
2759 const char *parthdr
= NULL
;
2760 const char *fwuphdr
= "fwup-ptn";
2761 const char *flashhdr
= "partition";
2763 /* TODO: search for the partition table */
2773 error(1, 0, "Invalid partition table");
2776 if (fseek(file
, offset
, SEEK_SET
) < 0)
2777 error(1, errno
, "Can not seek in the firmware");
2779 if (fread(buf
, 2048, 1, file
) != 1)
2780 error(1, errno
, "Can not read fwup-ptn from the firmware");
2784 /* look for the partition header */
2785 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2786 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2791 end
= buf
+ sizeof(buf
);
2792 while ((ptr
+ strlen(parthdr
)) < end
&&
2793 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2797 char name
[32] = { 0 };
2799 unsigned long base
= 0;
2800 unsigned long size
= 0;
2802 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2803 if (end_part
== NULL
) {
2804 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2808 for (int i
= 0; i
<= 4; i
++) {
2809 if (end_part
<= ptr
)
2812 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2813 if (end_element
== NULL
) {
2814 error(1, errno
, "Ignoring the rest of the partition entries.");
2819 /* partition header */
2821 ptr
= end_element
+ 1;
2825 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2826 strncpy(name
, ptr
, name_len
);
2827 name
[name_len
] = '\0';
2828 ptr
= end_element
+ 1;
2833 ptr
= end_element
+ 1;
2838 base
= strtoul(ptr
, NULL
, 16);
2839 ptr
= end_element
+ 1;
2844 ptr
= end_element
+ 1;
2845 /* actual size. The last element doesn't have a sepeartor */
2846 size
= strtoul(ptr
, NULL
, 16);
2847 /* the part ends with 0x09, 0x0d, 0x0a */
2849 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2858 static void write_partition(
2860 size_t firmware_offset
,
2861 struct flash_partition_entry
*entry
,
2867 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2869 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2870 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2871 error(1, errno
, "Can not read partition from input_file");
2873 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2874 error(1, errno
, "Can not write partition to output_file");
2876 /* write last chunk smaller than buffer */
2877 if (offset
< entry
->size
) {
2878 offset
= entry
->size
- offset
;
2879 if (fread(buf
, offset
, 1, input_file
) != 1)
2880 error(1, errno
, "Can not read partition from input_file");
2881 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2882 error(1, errno
, "Can not write partition to output_file");
2886 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2889 char output
[PATH_MAX
];
2891 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2892 output_file
= fopen(output
, "wb+");
2893 if (output_file
== NULL
) {
2894 error(1, errno
, "Can not open output file %s", output
);
2897 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2899 fclose(output_file
);
2904 /** extract all partitions from the firmware file */
2905 static int extract_firmware(const char *input
, const char *output_directory
)
2907 struct flash_partition_entry entries
[16] = { 0 };
2908 size_t max_entries
= 16;
2909 size_t firmware_offset
= 0x1014;
2912 struct stat statbuf
;
2914 /* check input file */
2915 if (stat(input
, &statbuf
)) {
2916 error(1, errno
, "Can not read input firmware %s", input
);
2919 /* check if output directory exists */
2920 if (stat(output_directory
, &statbuf
)) {
2921 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2924 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2925 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2928 input_file
= fopen(input
, "rb");
2930 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2931 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2934 for (size_t i
= 0; i
< max_entries
; i
++) {
2935 if (entries
[i
].name
== NULL
&&
2936 entries
[i
].base
== 0 &&
2937 entries
[i
].size
== 0)
2940 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2946 static struct flash_partition_entry
*find_partition(
2947 struct flash_partition_entry
*entries
, size_t max_entries
,
2948 const char *name
, const char *error_msg
)
2950 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2951 if (strcmp(entries
->name
, name
) == 0)
2955 error(1, 0, "%s", error_msg
);
2959 static void write_ff(FILE *output_file
, size_t size
)
2964 memset(buf
, 0xff, sizeof(buf
));
2966 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2967 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2968 error(1, errno
, "Can not write 0xff to output_file");
2971 /* write last chunk smaller than buffer */
2972 if (offset
< size
) {
2973 offset
= size
- offset
;
2974 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2975 error(1, errno
, "Can not write partition to output_file");
2979 static void convert_firmware(const char *input
, const char *output
)
2981 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2982 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2983 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2984 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2985 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2986 size_t firmware_offset
= 0x1014;
2987 FILE *input_file
, *output_file
;
2989 struct stat statbuf
;
2991 /* check input file */
2992 if (stat(input
, &statbuf
)) {
2993 error(1, errno
, "Can not read input firmware %s", input
);
2996 input_file
= fopen(input
, "rb");
2998 error(1, 0, "Can not open input firmware %s", input
);
3000 output_file
= fopen(output
, "wb");
3002 error(1, 0, "Can not open output firmware %s", output
);
3004 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3005 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3008 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3009 "os-image", "Error can not find os-image partition (fwup)");
3010 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3011 "file-system", "Error can not find file-system partition (fwup)");
3012 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3013 "partition-table", "Error can not find partition-table partition");
3015 /* the flash partition table has a 0x00000004 magic haeder */
3016 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3017 error(1, 0, "Error can not read the partition table (flash)");
3019 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3020 "os-image", "Error can not find os-image partition (flash)");
3021 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3022 "file-system", "Error can not find file-system partition (flash)");
3024 /* write os_image to 0x0 */
3025 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3026 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3028 /* write file-system behind os_image */
3029 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3030 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3031 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3033 fclose(output_file
);
3037 int main(int argc
, char *argv
[]) {
3038 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3039 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3040 bool add_jffs2_eof
= false, sysupgrade
= false;
3042 struct device_info
*info
;
3043 set_source_date_epoch();
3048 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3058 kernel_image
= optarg
;
3062 rootfs_image
= optarg
;
3070 sscanf(optarg
, "r%u", &rev
);
3074 add_jffs2_eof
= true;
3086 output_directory
= optarg
;
3090 extract_image
= optarg
;
3094 convert_image
= optarg
;
3103 if (extract_image
|| output_directory
) {
3105 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3106 if (!output_directory
)
3107 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3108 extract_firmware(extract_image
, output_directory
);
3109 } else if (convert_image
) {
3111 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3112 convert_firmware(convert_image
, output
);
3115 error(1, 0, "no board has been specified");
3117 error(1, 0, "no kernel image has been specified");
3119 error(1, 0, "no rootfs image has been specified");
3121 error(1, 0, "no output filename has been specified");
3123 info
= find_board(board
);
3126 error(1, 0, "unsupported board %s", board
);
3128 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);