1 // SPDX-License-Identifier: BSD-2-Clause
3 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
11 Image generation tool for the TP-LINK SafeLoader as seen on
12 TP-LINK Pharos devices (CPE210/220/510/520)
28 #include <arpa/inet.h>
30 #include <sys/types.h>
37 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
40 #define MAX_PARTITIONS 32
42 /** An image partition table entry */
43 struct image_partition_entry
{
49 /** A flash partition table entry */
50 struct flash_partition_entry
{
56 /** Partition trailing padding definitions
57 * Values 0x00 to 0xff are reserved to indicate the padding value
58 * Values from 0x100 are reserved to indicate other behaviour */
59 enum partition_trail_value
{
62 PART_TRAIL_MAX
= 0xff,
63 PART_TRAIL_NONE
= 0x100
66 /** Firmware layout description */
70 const char *support_list
;
71 enum partition_trail_value part_trail
;
73 uint32_t soft_ver_compat_level
;
74 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
75 const char *first_sysupgrade_partition
;
76 const char *last_sysupgrade_partition
;
79 struct __attribute__((__packed__
)) meta_header
{
84 /** The content of the soft-version structure */
85 struct __attribute__((__packed__
)) soft_version
{
87 uint8_t version_major
;
88 uint8_t version_minor
;
89 uint8_t version_patch
;
95 uint32_t compat_level
;
99 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
103 Salt for the MD5 hash
105 Fortunately, TP-LINK seems to use the same salt for most devices which use
106 the new image format.
108 static const uint8_t md5_salt
[16] = {
109 0x7a, 0x2b, 0x15, 0xed,
110 0x9b, 0x98, 0x59, 0x6d,
111 0xe5, 0x04, 0xab, 0x44,
112 0xac, 0x2a, 0x9f, 0x4e,
116 /** Firmware layout table */
117 static struct device_info boards
[] = {
118 /** Firmware layout for the CPE210/220 V1 */
121 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
124 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
125 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
126 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
127 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
128 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
135 {"fs-uboot", 0x00000, 0x20000},
136 {"partition-table", 0x20000, 0x02000},
137 {"default-mac", 0x30000, 0x00020},
138 {"product-info", 0x31100, 0x00100},
139 {"signature", 0x32000, 0x00400},
140 {"firmware", 0x40000, 0x770000},
141 {"soft-version", 0x7b0000, 0x00100},
142 {"support-list", 0x7b1000, 0x00400},
143 {"user-config", 0x7c0000, 0x10000},
144 {"default-config", 0x7d0000, 0x10000},
145 {"log", 0x7e0000, 0x10000},
146 {"radio", 0x7f0000, 0x10000},
150 .first_sysupgrade_partition
= "os-image",
151 .last_sysupgrade_partition
= "support-list",
154 /** Firmware layout for the CPE210 V2 */
157 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
160 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
161 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
162 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
163 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
164 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
165 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
166 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
168 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
169 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 {"fs-uboot", 0x00000, 0x20000},
175 {"partition-table", 0x20000, 0x02000},
176 {"default-mac", 0x30000, 0x00020},
177 {"product-info", 0x31100, 0x00100},
178 {"device-info", 0x31400, 0x00400},
179 {"signature", 0x32000, 0x00400},
180 {"device-id", 0x33000, 0x00100},
181 {"firmware", 0x40000, 0x770000},
182 {"soft-version", 0x7b0000, 0x00100},
183 {"support-list", 0x7b1000, 0x01000},
184 {"user-config", 0x7c0000, 0x10000},
185 {"default-config", 0x7d0000, 0x10000},
186 {"log", 0x7e0000, 0x10000},
187 {"radio", 0x7f0000, 0x10000},
191 .first_sysupgrade_partition
= "os-image",
192 .last_sysupgrade_partition
= "support-list",
195 /** Firmware layout for the CPE210 V3 */
198 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
201 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
202 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
203 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
204 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
205 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
206 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
207 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
208 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
209 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
210 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
211 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 {"fs-uboot", 0x00000, 0x20000},
217 {"partition-table", 0x20000, 0x01000},
218 {"default-mac", 0x30000, 0x00020},
219 {"product-info", 0x31100, 0x00100},
220 {"device-info", 0x31400, 0x00400},
221 {"signature", 0x32000, 0x00400},
222 {"device-id", 0x33000, 0x00100},
223 {"firmware", 0x40000, 0x770000},
224 {"soft-version", 0x7b0000, 0x00100},
225 {"support-list", 0x7b1000, 0x01000},
226 {"user-config", 0x7c0000, 0x10000},
227 {"default-config", 0x7d0000, 0x10000},
228 {"log", 0x7e0000, 0x10000},
229 {"radio", 0x7f0000, 0x10000},
233 .first_sysupgrade_partition
= "os-image",
234 .last_sysupgrade_partition
= "support-list",
237 /** Firmware layout for the CPE220 V2 */
240 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
243 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
248 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
251 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
252 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 {"fs-uboot", 0x00000, 0x20000},
258 {"partition-table", 0x20000, 0x02000},
259 {"default-mac", 0x30000, 0x00020},
260 {"product-info", 0x31100, 0x00100},
261 {"signature", 0x32000, 0x00400},
262 {"firmware", 0x40000, 0x770000},
263 {"soft-version", 0x7b0000, 0x00100},
264 {"support-list", 0x7b1000, 0x00400},
265 {"user-config", 0x7c0000, 0x10000},
266 {"default-config", 0x7d0000, 0x10000},
267 {"log", 0x7e0000, 0x10000},
268 {"radio", 0x7f0000, 0x10000},
272 .first_sysupgrade_partition
= "os-image",
273 .last_sysupgrade_partition
= "support-list",
276 /** Firmware layout for the CPE220 V3 */
279 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
282 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
283 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
284 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
286 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
288 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
289 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
290 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
291 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
296 {"fs-uboot", 0x00000, 0x20000},
297 {"partition-table", 0x20000, 0x02000},
298 {"default-mac", 0x30000, 0x00020},
299 {"product-info", 0x31100, 0x00100},
300 {"device-info", 0x31400, 0x00400},
301 {"signature", 0x32000, 0x00400},
302 {"device-id", 0x33000, 0x00100},
303 {"firmware", 0x40000, 0x770000},
304 {"soft-version", 0x7b0000, 0x00100},
305 {"support-list", 0x7b1000, 0x01000},
306 {"user-config", 0x7c0000, 0x10000},
307 {"default-config", 0x7d0000, 0x10000},
308 {"log", 0x7e0000, 0x10000},
309 {"radio", 0x7f0000, 0x10000},
313 .first_sysupgrade_partition
= "os-image",
314 .last_sysupgrade_partition
= "support-list",
317 /** Firmware layout for the CPE510/520 V1 */
320 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
323 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
324 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
326 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
327 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
329 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
330 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
335 {"fs-uboot", 0x00000, 0x20000},
336 {"partition-table", 0x20000, 0x02000},
337 {"default-mac", 0x30000, 0x00020},
338 {"product-info", 0x31100, 0x00100},
339 {"signature", 0x32000, 0x00400},
340 {"firmware", 0x40000, 0x770000},
341 {"soft-version", 0x7b0000, 0x00100},
342 {"support-list", 0x7b1000, 0x00400},
343 {"user-config", 0x7c0000, 0x10000},
344 {"default-config", 0x7d0000, 0x10000},
345 {"log", 0x7e0000, 0x10000},
346 {"radio", 0x7f0000, 0x10000},
350 .first_sysupgrade_partition
= "os-image",
351 .last_sysupgrade_partition
= "support-list",
354 /** Firmware layout for the CPE510 V2 */
357 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
360 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
362 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
365 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
371 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
376 {"fs-uboot", 0x00000, 0x20000},
377 {"partition-table", 0x20000, 0x02000},
378 {"default-mac", 0x30000, 0x00020},
379 {"product-info", 0x31100, 0x00100},
380 {"signature", 0x32000, 0x00400},
381 {"firmware", 0x40000, 0x770000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
414 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
415 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
420 {"fs-uboot", 0x00000, 0x20000},
421 {"partition-table", 0x20000, 0x02000},
422 {"default-mac", 0x30000, 0x00020},
423 {"product-info", 0x31100, 0x00100},
424 {"signature", 0x32000, 0x00400},
425 {"firmware", 0x40000, 0x770000},
426 {"soft-version", 0x7b0000, 0x00100},
427 {"support-list", 0x7b1000, 0x00400},
428 {"user-config", 0x7c0000, 0x10000},
429 {"default-config", 0x7d0000, 0x10000},
430 {"log", 0x7e0000, 0x10000},
431 {"radio", 0x7f0000, 0x10000},
435 .first_sysupgrade_partition
= "os-image",
436 .last_sysupgrade_partition
= "support-list",
439 /** Firmware layout for the CPE610V1 */
442 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
445 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
446 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
447 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
449 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
451 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
452 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
453 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
454 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
459 {"fs-uboot", 0x00000, 0x20000},
460 {"partition-table", 0x20000, 0x02000},
461 {"default-mac", 0x30000, 0x00020},
462 {"product-info", 0x31100, 0x00100},
463 {"signature", 0x32000, 0x00400},
464 {"firmware", 0x40000, 0x770000},
465 {"soft-version", 0x7b0000, 0x00100},
466 {"support-list", 0x7b1000, 0x00400},
467 {"user-config", 0x7c0000, 0x10000},
468 {"default-config", 0x7d0000, 0x10000},
469 {"log", 0x7e0000, 0x10000},
470 {"radio", 0x7f0000, 0x10000},
474 .first_sysupgrade_partition
= "os-image",
475 .last_sysupgrade_partition
= "support-list",
478 /** Firmware layout for the CPE610V2 */
481 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
484 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
485 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
486 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
487 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
488 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
489 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
490 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
491 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
493 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
498 {"fs-uboot", 0x00000, 0x20000},
499 {"partition-table", 0x20000, 0x02000},
500 {"default-mac", 0x30000, 0x00020},
501 {"product-info", 0x31100, 0x00100},
502 {"signature", 0x32000, 0x00400},
503 {"firmware", 0x40000, 0x770000},
504 {"soft-version", 0x7b0000, 0x00100},
505 {"support-list", 0x7b1000, 0x00400},
506 {"user-config", 0x7c0000, 0x10000},
507 {"default-config", 0x7d0000, 0x10000},
508 {"log", 0x7e0000, 0x10000},
509 {"radio", 0x7f0000, 0x10000},
513 .first_sysupgrade_partition
= "os-image",
514 .last_sysupgrade_partition
= "support-list",
519 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
522 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
523 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
524 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
529 {"fs-uboot", 0x00000, 0x20000},
530 {"partition-table", 0x20000, 0x02000},
531 {"default-mac", 0x30000, 0x00020},
532 {"product-info", 0x31100, 0x00100},
533 {"signature", 0x32000, 0x00400},
534 {"firmware", 0x40000, 0x770000},
535 {"soft-version", 0x7b0000, 0x00100},
536 {"support-list", 0x7b1000, 0x00400},
537 {"user-config", 0x7c0000, 0x10000},
538 {"default-config", 0x7d0000, 0x10000},
539 {"log", 0x7e0000, 0x10000},
540 {"radio", 0x7f0000, 0x10000},
544 .first_sysupgrade_partition
= "os-image",
545 .last_sysupgrade_partition
= "support-list",
550 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
553 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
554 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
555 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
560 {"fs-uboot", 0x00000, 0x20000},
561 {"partition-table", 0x20000, 0x02000},
562 {"default-mac", 0x30000, 0x00020},
563 {"product-info", 0x31100, 0x00100},
564 {"signature", 0x32000, 0x00400},
565 {"firmware", 0x40000, 0x770000},
566 {"soft-version", 0x7b0000, 0x00100},
567 {"support-list", 0x7b1000, 0x00400},
568 {"user-config", 0x7c0000, 0x10000},
569 {"default-config", 0x7d0000, 0x10000},
570 {"log", 0x7e0000, 0x10000},
571 {"radio", 0x7f0000, 0x10000},
575 .first_sysupgrade_partition
= "os-image",
576 .last_sysupgrade_partition
= "support-list",
581 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
584 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
585 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
586 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
587 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
592 {"fs-uboot", 0x00000, 0x20000},
593 {"partition-table", 0x20000, 0x02000},
594 {"default-mac", 0x30000, 0x00020},
595 {"product-info", 0x31100, 0x00100},
596 {"signature", 0x32000, 0x00400},
597 {"firmware", 0x40000, 0x770000},
598 {"soft-version", 0x7b0000, 0x00100},
599 {"support-list", 0x7b1000, 0x00400},
600 {"user-config", 0x7c0000, 0x10000},
601 {"default-config", 0x7d0000, 0x10000},
602 {"log", 0x7e0000, 0x10000},
603 {"radio", 0x7f0000, 0x10000},
607 .first_sysupgrade_partition
= "os-image",
608 .last_sysupgrade_partition
= "support-list",
613 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
616 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
617 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
618 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
619 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
624 {"fs-uboot", 0x00000, 0x20000},
625 {"partition-table", 0x20000, 0x02000},
626 {"default-mac", 0x30000, 0x00020},
627 {"product-info", 0x31100, 0x00100},
628 {"signature", 0x32000, 0x00400},
629 {"firmware", 0x40000, 0x770000},
630 {"soft-version", 0x7b0000, 0x00100},
631 {"support-list", 0x7b1000, 0x00400},
632 {"user-config", 0x7c0000, 0x10000},
633 {"default-config", 0x7d0000, 0x10000},
634 {"log", 0x7e0000, 0x10000},
635 {"radio", 0x7f0000, 0x10000},
639 .first_sysupgrade_partition
= "os-image",
640 .last_sysupgrade_partition
= "support-list",
643 /** Firmware layout for the AD7200 */
649 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
654 {"SBL1", 0x00000, 0x20000},
655 {"MIBIB", 0x20000, 0x20000},
656 {"SBL2", 0x40000, 0x20000},
657 {"SBL3", 0x60000, 0x30000},
658 {"DDRCONFIG", 0x90000, 0x10000},
659 {"SSD", 0xa0000, 0x10000},
660 {"TZ", 0xb0000, 0x30000},
661 {"RPM", 0xe0000, 0x20000},
662 {"fs-uboot", 0x100000, 0x70000},
663 {"uboot-env", 0x170000, 0x40000},
664 {"radio", 0x1b0000, 0x40000},
665 {"os-image", 0x1f0000, 0x400000},
666 {"file-system", 0x5f0000, 0x1900000},
667 {"default-mac", 0x1ef0000, 0x00200},
668 {"pin", 0x1ef0200, 0x00200},
669 {"device-id", 0x1ef0400, 0x00200},
670 {"product-info", 0x1ef0600, 0x0fa00},
671 {"partition-table", 0x1f00000, 0x10000},
672 {"soft-version", 0x1f10000, 0x10000},
673 {"support-list", 0x1f20000, 0x10000},
674 {"profile", 0x1f30000, 0x10000},
675 {"default-config", 0x1f40000, 0x10000},
676 {"user-config", 0x1f50000, 0x40000},
677 {"qos-db", 0x1f90000, 0x40000},
678 {"usb-config", 0x1fd0000, 0x10000},
679 {"log", 0x1fe0000, 0x20000},
683 .first_sysupgrade_partition
= "os-image",
684 .last_sysupgrade_partition
= "file-system"
687 /** Firmware layout for the C2600 */
693 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
698 We use a bigger os-image partition than the stock images (and thus
699 smaller file-system), as our kernel doesn't fit in the stock firmware's
700 2 MB os-image since kernel 4.14.
703 {"SBL1", 0x00000, 0x20000},
704 {"MIBIB", 0x20000, 0x20000},
705 {"SBL2", 0x40000, 0x20000},
706 {"SBL3", 0x60000, 0x30000},
707 {"DDRCONFIG", 0x90000, 0x10000},
708 {"SSD", 0xa0000, 0x10000},
709 {"TZ", 0xb0000, 0x30000},
710 {"RPM", 0xe0000, 0x20000},
711 {"fs-uboot", 0x100000, 0x70000},
712 {"uboot-env", 0x170000, 0x40000},
713 {"radio", 0x1b0000, 0x40000},
714 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
715 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
716 {"default-mac", 0x1ef0000, 0x00200},
717 {"pin", 0x1ef0200, 0x00200},
718 {"product-info", 0x1ef0400, 0x0fc00},
719 {"partition-table", 0x1f00000, 0x10000},
720 {"soft-version", 0x1f10000, 0x10000},
721 {"support-list", 0x1f20000, 0x10000},
722 {"profile", 0x1f30000, 0x10000},
723 {"default-config", 0x1f40000, 0x10000},
724 {"user-config", 0x1f50000, 0x40000},
725 {"qos-db", 0x1f90000, 0x40000},
726 {"usb-config", 0x1fd0000, 0x10000},
727 {"log", 0x1fe0000, 0x20000},
731 .first_sysupgrade_partition
= "os-image",
732 .last_sysupgrade_partition
= "file-system"
735 /** Firmware layout for the A7-V5 */
737 .id
= "ARCHER-A7-V5",
740 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
741 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
742 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
743 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
744 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
745 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
747 .soft_ver
= "soft_ver:1.0.0\n",
749 /* We're using a dynamic kernel/rootfs split here */
751 {"factory-boot", 0x00000, 0x20000},
752 {"fs-uboot", 0x20000, 0x20000},
753 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
754 /* Stock: name file-system base 0x160000 size 0xda0000 */
755 {"default-mac", 0xf40000, 0x00200},
756 {"pin", 0xf40200, 0x00200},
757 {"device-id", 0xf40400, 0x00100},
758 {"product-info", 0xf40500, 0x0fb00},
759 {"soft-version", 0xf50000, 0x00100},
760 {"extra-para", 0xf51000, 0x01000},
761 {"support-list", 0xf52000, 0x0a000},
762 {"profile", 0xf5c000, 0x04000},
763 {"default-config", 0xf60000, 0x10000},
764 {"user-config", 0xf70000, 0x40000},
765 {"certificate", 0xfb0000, 0x10000},
766 {"partition-table", 0xfc0000, 0x10000},
767 {"log", 0xfd0000, 0x20000},
768 {"radio", 0xff0000, 0x10000},
772 .first_sysupgrade_partition
= "os-image",
773 .last_sysupgrade_partition
= "file-system",
776 /** Firmware layout for the C2v3 */
778 .id
= "ARCHER-C2-V3",
781 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
782 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
783 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
785 .soft_ver
= "soft_ver:3.0.1\n",
787 /** We're using a dynamic kernel/rootfs split here */
790 {"factory-boot", 0x00000, 0x20000},
791 {"fs-uboot", 0x20000, 0x10000},
792 {"firmware", 0x30000, 0x7a0000},
793 {"user-config", 0x7d0000, 0x04000},
794 {"default-mac", 0x7e0000, 0x00100},
795 {"device-id", 0x7e0100, 0x00100},
796 {"extra-para", 0x7e0200, 0x00100},
797 {"pin", 0x7e0300, 0x00100},
798 {"support-list", 0x7e0400, 0x00400},
799 {"soft-version", 0x7e0800, 0x00400},
800 {"product-info", 0x7e0c00, 0x01400},
801 {"partition-table", 0x7e2000, 0x01000},
802 {"profile", 0x7e3000, 0x01000},
803 {"default-config", 0x7e4000, 0x04000},
804 {"merge-config", 0x7ec000, 0x02000},
805 {"qos-db", 0x7ee000, 0x02000},
806 {"radio", 0x7f0000, 0x10000},
810 .first_sysupgrade_partition
= "os-image",
811 .last_sysupgrade_partition
= "file-system",
814 /** Firmware layout for the C25v1 */
816 .id
= "ARCHER-C25-V1",
819 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
820 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
821 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
823 .soft_ver
= "soft_ver:1.0.0\n",
825 /* We're using a dynamic kernel/rootfs split here */
827 {"factory-boot", 0x00000, 0x20000},
828 {"fs-uboot", 0x20000, 0x10000},
829 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
830 /* Stock: name file-system base 0x130000 size 0x6a0000 */
831 {"user-config", 0x7d0000, 0x04000},
832 {"default-mac", 0x7e0000, 0x00100},
833 {"device-id", 0x7e0100, 0x00100},
834 {"extra-para", 0x7e0200, 0x00100},
835 {"pin", 0x7e0300, 0x00100},
836 {"support-list", 0x7e0400, 0x00400},
837 {"soft-version", 0x7e0800, 0x00400},
838 {"product-info", 0x7e0c00, 0x01400},
839 {"partition-table", 0x7e2000, 0x01000},
840 {"profile", 0x7e3000, 0x01000},
841 {"default-config", 0x7e4000, 0x04000},
842 {"merge-config", 0x7ec000, 0x02000},
843 {"qos-db", 0x7ee000, 0x02000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C58v1 */
854 .id
= "ARCHER-C58-V1",
858 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
862 .soft_ver
= "soft_ver:1.0.0\n",
865 {"fs-uboot", 0x00000, 0x10000},
866 {"default-mac", 0x10000, 0x00200},
867 {"pin", 0x10200, 0x00200},
868 {"product-info", 0x10400, 0x00100},
869 {"partition-table", 0x10500, 0x00800},
870 {"soft-version", 0x11300, 0x00200},
871 {"support-list", 0x11500, 0x00100},
872 {"device-id", 0x11600, 0x00100},
873 {"profile", 0x11700, 0x03900},
874 {"default-config", 0x15000, 0x04000},
875 {"user-config", 0x19000, 0x04000},
876 {"firmware", 0x20000, 0x7c8000},
877 {"certyficate", 0x7e8000, 0x08000},
878 {"radio", 0x7f0000, 0x10000},
882 .first_sysupgrade_partition
= "os-image",
883 .last_sysupgrade_partition
= "file-system",
886 /** Firmware layout for the C59v1 */
888 .id
= "ARCHER-C59-V1",
892 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
893 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
894 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
895 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
897 .soft_ver
= "soft_ver:1.0.0\n",
899 /* We're using a dynamic kernel/rootfs split here */
901 {"fs-uboot", 0x00000, 0x10000},
902 {"default-mac", 0x10000, 0x00200},
903 {"pin", 0x10200, 0x00200},
904 {"device-id", 0x10400, 0x00100},
905 {"product-info", 0x10500, 0x0fb00},
906 {"firmware", 0x20000, 0xe30000},
907 {"partition-table", 0xe50000, 0x10000},
908 {"soft-version", 0xe60000, 0x10000},
909 {"support-list", 0xe70000, 0x10000},
910 {"profile", 0xe80000, 0x10000},
911 {"default-config", 0xe90000, 0x10000},
912 {"user-config", 0xea0000, 0x40000},
913 {"usb-config", 0xee0000, 0x10000},
914 {"certificate", 0xef0000, 0x10000},
915 {"qos-db", 0xf00000, 0x40000},
916 {"log", 0xfe0000, 0x10000},
917 {"radio", 0xff0000, 0x10000},
921 .first_sysupgrade_partition
= "os-image",
922 .last_sysupgrade_partition
= "file-system",
925 /** Firmware layout for the C59v2 */
927 .id
= "ARCHER-C59-V2",
931 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
932 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
933 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
935 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
937 /** We're using a dynamic kernel/rootfs split here */
939 {"factory-boot", 0x00000, 0x20000},
940 {"fs-uboot", 0x20000, 0x10000},
941 {"default-mac", 0x30000, 0x00200},
942 {"pin", 0x30200, 0x00200},
943 {"device-id", 0x30400, 0x00100},
944 {"product-info", 0x30500, 0x0fb00},
945 {"firmware", 0x40000, 0xe10000},
946 {"partition-table", 0xe50000, 0x10000},
947 {"soft-version", 0xe60000, 0x10000},
948 {"support-list", 0xe70000, 0x10000},
949 {"profile", 0xe80000, 0x10000},
950 {"default-config", 0xe90000, 0x10000},
951 {"user-config", 0xea0000, 0x40000},
952 {"usb-config", 0xee0000, 0x10000},
953 {"certificate", 0xef0000, 0x10000},
954 {"extra-para", 0xf00000, 0x10000},
955 {"qos-db", 0xf10000, 0x30000},
956 {"log", 0xfe0000, 0x10000},
957 {"radio", 0xff0000, 0x10000},
961 .first_sysupgrade_partition
= "os-image",
962 .last_sysupgrade_partition
= "file-system",
965 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
967 .id
= "ARCHER-C6-V2",
971 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
972 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
973 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
975 .soft_ver
= "soft_ver:1.9.1\n",
978 {"fs-uboot", 0x00000, 0x20000},
979 {"default-mac", 0x20000, 0x00200},
980 {"pin", 0x20200, 0x00100},
981 {"product-info", 0x20300, 0x00200},
982 {"device-id", 0x20500, 0x0fb00},
983 {"firmware", 0x30000, 0x7a9400},
984 {"soft-version", 0x7d9400, 0x00100},
985 {"extra-para", 0x7d9500, 0x00100},
986 {"support-list", 0x7d9600, 0x00200},
987 {"profile", 0x7d9800, 0x03000},
988 {"default-config", 0x7dc800, 0x03000},
989 {"partition-table", 0x7df800, 0x00800},
990 {"user-config", 0x7e0000, 0x0c000},
991 {"certificate", 0x7ec000, 0x04000},
992 {"radio", 0x7f0000, 0x10000},
996 .first_sysupgrade_partition
= "os-image",
997 .last_sysupgrade_partition
= "file-system",
1000 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1002 .id
= "ARCHER-C6-V2-US",
1006 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1007 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1008 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1010 .soft_ver
= "soft_ver:1.9.1\n",
1013 {"factory-boot", 0x00000, 0x20000},
1014 {"default-mac", 0x20000, 0x00200},
1015 {"pin", 0x20200, 0x00100},
1016 {"product-info", 0x20300, 0x00200},
1017 {"device-id", 0x20500, 0x0fb00},
1018 {"fs-uboot", 0x30000, 0x20000},
1019 {"firmware", 0x50000, 0xf89400},
1020 {"soft-version", 0xfd9400, 0x00100},
1021 {"extra-para", 0xfd9500, 0x00100},
1022 {"support-list", 0xfd9600, 0x00200},
1023 {"profile", 0xfd9800, 0x03000},
1024 {"default-config", 0xfdc800, 0x03000},
1025 {"partition-table", 0xfdf800, 0x00800},
1026 {"user-config", 0xfe0000, 0x0c000},
1027 {"certificate", 0xfec000, 0x04000},
1028 {"radio", 0xff0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1034 /** Firmware layout for the Archer C6 v3 */
1036 .id
= "ARCHER-C6-V3",
1040 "{product_name:Archer C6,product_ver:3.20,special_id:55530000}"
1041 "{product_name:Archer C6,product_ver:3.20,special_id:45550000}"
1042 "{product_name:Archer C6,product_ver:3.20,special_id:52550000}"
1043 "{product_name:Archer C6,product_ver:3.20,special_id:4A500000}"
1044 "{product_name:Archer C6,product_ver:3.20,special_id:4B520000}",
1046 .soft_ver
= "soft_ver:1.0.9\n",
1049 {"fs-uboot", 0x00000, 0x40000},
1050 {"firmware", 0x40000, 0xf60000},
1051 {"default-mac", 0xfa0000, 0x00200},
1052 {"pin", 0xfa0200, 0x00100},
1053 {"device-id", 0xfa0300, 0x00100},
1054 {"product-info", 0xfa0400, 0x0fc00},
1055 {"default-config", 0xfb0000, 0x08000},
1056 {"ap-def-config", 0xfb8000, 0x08000},
1057 {"user-config", 0xfc0000, 0x0a000},
1058 {"ag-config", 0xfca000, 0x04000},
1059 {"certificate", 0xfce000, 0x02000},
1060 {"ap-config", 0xfd0000, 0x06000},
1061 {"router-config", 0xfd6000, 0x06000},
1062 {"favicon", 0xfdc000, 0x02000},
1063 {"logo", 0xfde000, 0x02000},
1064 {"partition-table", 0xfe0000, 0x00800},
1065 {"soft-version", 0xfe0800, 0x00100},
1066 {"support-list", 0xfe0900, 0x00200},
1067 {"profile", 0xfe0b00, 0x03000},
1068 {"extra-para", 0xfe3b00, 0x00100},
1069 {"radio", 0xff0000, 0x10000},
1072 .first_sysupgrade_partition
= "os-image",
1073 .last_sysupgrade_partition
= "file-system",
1075 /** Firmware layout for the Archer A6 v3 */
1077 .id
= "ARCHER-A6-V3",
1081 "{product_name:Archer A6,product_ver:3.0.0,special_id:43410000}\n"
1082 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1083 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
1085 .soft_ver
= "soft_ver:1.0.5\n",
1088 {"fs-uboot", 0x00000, 0x40000},
1089 {"firmware", 0x40000, 0xf60000},
1090 {"default-mac", 0xfa0000, 0x00200},
1091 {"pin", 0xfa0200, 0x00100},
1092 {"device-id", 0xfa0300, 0x00100},
1093 {"product-info", 0xfa0400, 0x0fc00},
1094 {"default-config", 0xfb0000, 0x08000},
1095 {"ap-def-config", 0xfb8000, 0x08000},
1096 {"user-config", 0xfc0000, 0x0a000},
1097 {"ag-config", 0xfca000, 0x04000},
1098 {"certificate", 0xfce000, 0x02000},
1099 {"ap-config", 0xfd0000, 0x06000},
1100 {"router-config", 0xfd6000, 0x06000},
1101 {"favicon", 0xfdc000, 0x02000},
1102 {"logo", 0xfde000, 0x02000},
1103 {"partition-table", 0xfe0000, 0x00800},
1104 {"soft-version", 0xfe0800, 0x00100},
1105 {"support-list", 0xfe0900, 0x00200},
1106 {"profile", 0xfe0b00, 0x03000},
1107 {"extra-para", 0xfe3b00, 0x00100},
1108 {"radio", 0xff0000, 0x10000},
1111 .first_sysupgrade_partition
= "os-image",
1112 .last_sysupgrade_partition
= "file-system",
1114 /** Firmware layout for the Archer C6U v1 */
1116 .id
= "ARCHER-C6U-V1",
1120 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n",
1122 .soft_ver
= "soft_ver:1.0.2\n",
1125 {"fs-uboot", 0x00000, 0x40000},
1126 {"firmware", 0x40000, 0xf60000},
1127 {"default-mac", 0xfa0000, 0x00200},
1128 {"pin", 0xfa0200, 0x00100},
1129 {"device-id", 0xfa0300, 0x00100},
1130 {"product-info", 0xfa0400, 0x0fc00},
1131 {"default-config", 0xfb0000, 0x08000},
1132 {"ap-def-config", 0xfb8000, 0x08000},
1133 {"user-config", 0xfc0000, 0x0c000},
1134 {"certificate", 0xfcc000, 0x04000},
1135 {"ap-config", 0xfd0000, 0x08000},
1136 {"router-config", 0xfd8000, 0x08000},
1137 {"partition-table", 0xfe0000, 0x00800},
1138 {"soft-version", 0xfe0800, 0x00100},
1139 {"support-list", 0xfe0900, 0x00200},
1140 {"profile", 0xfe0b00, 0x03000},
1141 {"extra-para", 0xfe3b00, 0x00100},
1142 {"radio", 0xff0000, 0x10000},
1145 .first_sysupgrade_partition
= "os-image",
1146 .last_sysupgrade_partition
= "file-system",
1148 /** Firmware layout for the C60v1 */
1150 .id
= "ARCHER-C60-V1",
1154 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1155 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1156 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1158 .soft_ver
= "soft_ver:1.0.0\n",
1161 {"fs-uboot", 0x00000, 0x10000},
1162 {"default-mac", 0x10000, 0x00200},
1163 {"pin", 0x10200, 0x00200},
1164 {"product-info", 0x10400, 0x00100},
1165 {"partition-table", 0x10500, 0x00800},
1166 {"soft-version", 0x11300, 0x00200},
1167 {"support-list", 0x11500, 0x00100},
1168 {"device-id", 0x11600, 0x00100},
1169 {"profile", 0x11700, 0x03900},
1170 {"default-config", 0x15000, 0x04000},
1171 {"user-config", 0x19000, 0x04000},
1172 {"firmware", 0x20000, 0x7c8000},
1173 {"certyficate", 0x7e8000, 0x08000},
1174 {"radio", 0x7f0000, 0x10000},
1178 .first_sysupgrade_partition
= "os-image",
1179 .last_sysupgrade_partition
= "file-system",
1182 /** Firmware layout for the C60v2 */
1184 .id
= "ARCHER-C60-V2",
1188 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1189 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1190 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1192 .soft_ver
= "soft_ver:2.0.0\n",
1195 {"factory-boot", 0x00000, 0x1fb00},
1196 {"default-mac", 0x1fb00, 0x00200},
1197 {"pin", 0x1fd00, 0x00100},
1198 {"product-info", 0x1fe00, 0x00100},
1199 {"device-id", 0x1ff00, 0x00100},
1200 {"fs-uboot", 0x20000, 0x10000},
1201 {"firmware", 0x30000, 0x7a0000},
1202 {"soft-version", 0x7d9500, 0x00100},
1203 {"support-list", 0x7d9600, 0x00100},
1204 {"extra-para", 0x7d9700, 0x00100},
1205 {"profile", 0x7d9800, 0x03000},
1206 {"default-config", 0x7dc800, 0x03000},
1207 {"partition-table", 0x7df800, 0x00800},
1208 {"user-config", 0x7e0000, 0x0c000},
1209 {"certificate", 0x7ec000, 0x04000},
1210 {"radio", 0x7f0000, 0x10000},
1214 .first_sysupgrade_partition
= "os-image",
1215 .last_sysupgrade_partition
= "file-system",
1218 /** Firmware layout for the C60v3 */
1220 .id
= "ARCHER-C60-V3",
1224 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1225 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1226 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1228 .soft_ver
= "soft_ver:3.0.0\n",
1231 {"factory-boot", 0x00000, 0x1fb00},
1232 {"default-mac", 0x1fb00, 0x00200},
1233 {"pin", 0x1fd00, 0x00100},
1234 {"product-info", 0x1fe00, 0x00100},
1235 {"device-id", 0x1ff00, 0x00100},
1236 {"fs-uboot", 0x20000, 0x10000},
1237 {"firmware", 0x30000, 0x7a0000},
1238 {"soft-version", 0x7d9500, 0x00100},
1239 {"support-list", 0x7d9600, 0x00100},
1240 {"extra-para", 0x7d9700, 0x00100},
1241 {"profile", 0x7d9800, 0x03000},
1242 {"default-config", 0x7dc800, 0x03000},
1243 {"partition-table", 0x7df800, 0x00800},
1244 {"user-config", 0x7e0000, 0x0c000},
1245 {"certificate", 0x7ec000, 0x04000},
1246 {"radio", 0x7f0000, 0x10000},
1250 .first_sysupgrade_partition
= "os-image",
1251 .last_sysupgrade_partition
= "file-system",
1254 /** Firmware layout for the C5 */
1256 .id
= "ARCHER-C5-V2",
1260 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1261 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1262 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1267 {"fs-uboot", 0x00000, 0x40000},
1268 {"os-image", 0x40000, 0x200000},
1269 {"file-system", 0x240000, 0xc00000},
1270 {"default-mac", 0xe40000, 0x00200},
1271 {"pin", 0xe40200, 0x00200},
1272 {"product-info", 0xe40400, 0x00200},
1273 {"partition-table", 0xe50000, 0x10000},
1274 {"soft-version", 0xe60000, 0x00200},
1275 {"support-list", 0xe61000, 0x0f000},
1276 {"profile", 0xe70000, 0x10000},
1277 {"default-config", 0xe80000, 0x10000},
1278 {"user-config", 0xe90000, 0x50000},
1279 {"log", 0xee0000, 0x100000},
1280 {"radio_bk", 0xfe0000, 0x10000},
1281 {"radio", 0xff0000, 0x10000},
1285 .first_sysupgrade_partition
= "os-image",
1286 .last_sysupgrade_partition
= "file-system"
1289 /** Firmware layout for the C7 */
1291 .id
= "ARCHER-C7-V4",
1294 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1295 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1296 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1297 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1298 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1299 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1300 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1301 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1302 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1303 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1305 .soft_ver
= "soft_ver:1.0.0\n",
1307 /* We're using a dynamic kernel/rootfs split here */
1309 {"factory-boot", 0x00000, 0x20000},
1310 {"fs-uboot", 0x20000, 0x20000},
1311 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1312 /* Stock: name file-system base 0x160000 size 0xda0000 */
1313 {"default-mac", 0xf00000, 0x00200},
1314 {"pin", 0xf00200, 0x00200},
1315 {"device-id", 0xf00400, 0x00100},
1316 {"product-info", 0xf00500, 0x0fb00},
1317 {"soft-version", 0xf10000, 0x00100},
1318 {"extra-para", 0xf11000, 0x01000},
1319 {"support-list", 0xf12000, 0x0a000},
1320 {"profile", 0xf1c000, 0x04000},
1321 {"default-config", 0xf20000, 0x10000},
1322 {"user-config", 0xf30000, 0x40000},
1323 {"qos-db", 0xf70000, 0x40000},
1324 {"certificate", 0xfb0000, 0x10000},
1325 {"partition-table", 0xfc0000, 0x10000},
1326 {"log", 0xfd0000, 0x20000},
1327 {"radio", 0xff0000, 0x10000},
1331 .first_sysupgrade_partition
= "os-image",
1332 .last_sysupgrade_partition
= "file-system",
1335 /** Firmware layout for the C7 v5*/
1337 .id
= "ARCHER-C7-V5",
1340 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1341 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1342 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1343 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1344 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1345 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1346 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1347 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1350 .soft_ver
= "soft_ver:7.0.0\n",
1352 /* We're using a dynamic kernel/rootfs split here */
1354 {"factory-boot", 0x00000, 0x20000},
1355 {"fs-uboot", 0x20000, 0x20000},
1356 {"partition-table", 0x40000, 0x10000},
1357 {"radio", 0x50000, 0x10000},
1358 {"default-mac", 0x60000, 0x00200},
1359 {"pin", 0x60200, 0x00200},
1360 {"device-id", 0x60400, 0x00100},
1361 {"product-info", 0x60500, 0x0fb00},
1362 {"soft-version", 0x70000, 0x01000},
1363 {"extra-para", 0x71000, 0x01000},
1364 {"support-list", 0x72000, 0x0a000},
1365 {"profile", 0x7c000, 0x04000},
1366 {"user-config", 0x80000, 0x40000},
1369 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1370 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1372 {"log", 0xfc0000, 0x20000},
1373 {"certificate", 0xfe0000, 0x10000},
1374 {"default-config", 0xff0000, 0x10000},
1379 .first_sysupgrade_partition
= "os-image",
1380 .last_sysupgrade_partition
= "file-system",
1383 /** Firmware layout for the C9 */
1389 "{product_name:ArcherC9,"
1390 "product_ver:1.0.0,"
1391 "special_id:00000000}\n",
1396 {"fs-uboot", 0x00000, 0x40000},
1397 {"os-image", 0x40000, 0x200000},
1398 {"file-system", 0x240000, 0xc00000},
1399 {"default-mac", 0xe40000, 0x00200},
1400 {"pin", 0xe40200, 0x00200},
1401 {"product-info", 0xe40400, 0x00200},
1402 {"partition-table", 0xe50000, 0x10000},
1403 {"soft-version", 0xe60000, 0x00200},
1404 {"support-list", 0xe61000, 0x0f000},
1405 {"profile", 0xe70000, 0x10000},
1406 {"default-config", 0xe80000, 0x10000},
1407 {"user-config", 0xe90000, 0x50000},
1408 {"log", 0xee0000, 0x100000},
1409 {"radio_bk", 0xfe0000, 0x10000},
1410 {"radio", 0xff0000, 0x10000},
1414 .first_sysupgrade_partition
= "os-image",
1415 .last_sysupgrade_partition
= "file-system"
1418 /** Firmware layout for the EAP120 */
1421 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1424 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1429 {"fs-uboot", 0x00000, 0x20000},
1430 {"partition-table", 0x20000, 0x02000},
1431 {"default-mac", 0x30000, 0x00020},
1432 {"support-list", 0x31000, 0x00100},
1433 {"product-info", 0x31100, 0x00100},
1434 {"soft-version", 0x32000, 0x00100},
1435 {"os-image", 0x40000, 0x180000},
1436 {"file-system", 0x1c0000, 0x600000},
1437 {"user-config", 0x7c0000, 0x10000},
1438 {"backup-config", 0x7d0000, 0x10000},
1439 {"log", 0x7e0000, 0x10000},
1440 {"radio", 0x7f0000, 0x10000},
1444 .first_sysupgrade_partition
= "os-image",
1445 .last_sysupgrade_partition
= "file-system"
1448 /** Firmware layout for the EAP225-Outdoor v1 */
1450 .id
= "EAP225-OUTDOOR-V1",
1453 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1454 .part_trail
= PART_TRAIL_NONE
,
1456 .soft_ver_compat_level
= 1,
1459 {"fs-uboot", 0x00000, 0x20000},
1460 {"partition-table", 0x20000, 0x02000},
1461 {"default-mac", 0x30000, 0x01000},
1462 {"support-list", 0x31000, 0x00100},
1463 {"product-info", 0x31100, 0x00400},
1464 {"soft-version", 0x32000, 0x00100},
1465 {"firmware", 0x40000, 0xd80000},
1466 {"user-config", 0xdc0000, 0x30000},
1467 {"mutil-log", 0xf30000, 0x80000},
1468 {"oops", 0xfb0000, 0x40000},
1469 {"radio", 0xff0000, 0x10000},
1473 .first_sysupgrade_partition
= "os-image",
1474 .last_sysupgrade_partition
= "file-system"
1477 /** Firmware layout for the EAP225 v3 */
1482 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1483 .part_trail
= PART_TRAIL_NONE
,
1485 .soft_ver_compat_level
= 1,
1488 {"fs-uboot", 0x00000, 0x20000},
1489 {"partition-table", 0x20000, 0x02000},
1490 {"default-mac", 0x30000, 0x01000},
1491 {"support-list", 0x31000, 0x00100},
1492 {"product-info", 0x31100, 0x00400},
1493 {"soft-version", 0x32000, 0x00100},
1494 {"firmware", 0x40000, 0xd80000},
1495 {"user-config", 0xdc0000, 0x30000},
1496 {"mutil-log", 0xf30000, 0x80000},
1497 {"oops", 0xfb0000, 0x40000},
1498 {"radio", 0xff0000, 0x10000},
1502 .first_sysupgrade_partition
= "os-image",
1503 .last_sysupgrade_partition
= "file-system"
1506 /** Firmware layout for the EAP225-Wall v2 */
1508 .id
= "EAP225-WALL-V2",
1511 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1512 .part_trail
= PART_TRAIL_NONE
,
1514 .soft_ver_compat_level
= 1,
1517 {"fs-uboot", 0x00000, 0x20000},
1518 {"partition-table", 0x20000, 0x02000},
1519 {"default-mac", 0x30000, 0x01000},
1520 {"support-list", 0x31000, 0x00100},
1521 {"product-info", 0x31100, 0x00400},
1522 {"soft-version", 0x32000, 0x00100},
1523 {"firmware", 0x40000, 0xd80000},
1524 {"user-config", 0xdc0000, 0x30000},
1525 {"mutil-log", 0xf30000, 0x80000},
1526 {"oops", 0xfb0000, 0x40000},
1527 {"radio", 0xff0000, 0x10000},
1531 .first_sysupgrade_partition
= "os-image",
1532 .last_sysupgrade_partition
= "file-system"
1535 /** Firmware layout for the EAP235-Wall v1 */
1537 .id
= "EAP235-WALL-V1",
1540 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1541 .part_trail
= PART_TRAIL_NONE
,
1543 .soft_ver_compat_level
= 1,
1546 {"fs-uboot", 0x00000, 0x80000},
1547 {"partition-table", 0x80000, 0x02000},
1548 {"default-mac", 0x90000, 0x01000},
1549 {"support-list", 0x91000, 0x00100},
1550 {"product-info", 0x91100, 0x00400},
1551 {"soft-version", 0x92000, 0x00100},
1552 {"firmware", 0xa0000, 0xd20000},
1553 {"user-config", 0xdc0000, 0x30000},
1554 {"mutil-log", 0xf30000, 0x80000},
1555 {"oops", 0xfb0000, 0x40000},
1556 {"radio", 0xff0000, 0x10000},
1560 .first_sysupgrade_partition
= "os-image",
1561 .last_sysupgrade_partition
= "file-system"
1564 /** Firmware layout for the EAP245 v1 */
1569 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1570 .part_trail
= PART_TRAIL_NONE
,
1574 {"fs-uboot", 0x00000, 0x20000},
1575 {"partition-table", 0x20000, 0x02000},
1576 {"default-mac", 0x30000, 0x01000},
1577 {"support-list", 0x31000, 0x00100},
1578 {"product-info", 0x31100, 0x00400},
1579 {"soft-version", 0x32000, 0x00100},
1580 {"firmware", 0x40000, 0xd80000},
1581 {"user-config", 0xdc0000, 0x30000},
1582 {"radio", 0xff0000, 0x10000},
1586 .first_sysupgrade_partition
= "os-image",
1587 .last_sysupgrade_partition
= "file-system"
1590 /** Firmware layout for the EAP245 v3 */
1595 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1596 .part_trail
= PART_TRAIL_NONE
,
1598 .soft_ver_compat_level
= 1,
1600 /** Firmware partition with dynamic kernel/rootfs split */
1602 {"factroy-boot", 0x00000, 0x40000},
1603 {"fs-uboot", 0x40000, 0x40000},
1604 {"partition-table", 0x80000, 0x10000},
1605 {"default-mac", 0x90000, 0x01000},
1606 {"support-list", 0x91000, 0x00100},
1607 {"product-info", 0x91100, 0x00400},
1608 {"soft-version", 0x92000, 0x00100},
1609 {"radio", 0xa0000, 0x10000},
1610 {"extra-para", 0xb0000, 0x10000},
1611 {"firmware", 0xc0000, 0xe40000},
1612 {"config", 0xf00000, 0x30000},
1613 {"mutil-log", 0xf30000, 0x80000},
1614 {"oops", 0xfb0000, 0x40000},
1618 .first_sysupgrade_partition
= "os-image",
1619 .last_sysupgrade_partition
= "file-system"
1622 /** Firmware layout for the TL-WA1201 v2 */
1624 .id
= "TL-WA1201-V2",
1628 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n"
1629 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n",
1631 .soft_ver
= "soft_ver:1.0.1 Build 20200709 rel.66244\n",
1634 {"fs-uboot", 0x00000, 0x20000},
1635 {"default-mac", 0x20000, 0x00200},
1636 {"pin", 0x20200, 0x00100},
1637 {"product-info", 0x20300, 0x00200},
1638 {"device-id", 0x20500, 0x0fb00},
1639 {"firmware", 0x30000, 0xce0000},
1640 {"portal-logo", 0xd10000, 0x20000},
1641 {"portal-back", 0xd30000, 0x200000},
1642 {"soft-version", 0xf30000, 0x00200},
1643 {"extra-para", 0xf30200, 0x00200},
1644 {"support-list", 0xf30400, 0x00200},
1645 {"profile", 0xf30600, 0x0fa00},
1646 {"apdef-config", 0xf40000, 0x10000},
1647 {"ap-config", 0xf50000, 0x10000},
1648 {"redef-config", 0xf60000, 0x10000},
1649 {"re-config", 0xf70000, 0x10000},
1650 {"multidef-config", 0xf80000, 0x10000},
1651 {"multi-config", 0xf90000, 0x10000},
1652 {"clientdef-config", 0xfa0000, 0x10000},
1653 {"client-config", 0xfb0000, 0x10000},
1654 {"partition-table", 0xfc0000, 0x10000},
1655 {"user-config", 0xfd0000, 0x10000},
1656 {"certificate", 0xfe0000, 0x10000},
1657 {"radio", 0xff0000, 0x10000},
1660 .first_sysupgrade_partition
= "os-image",
1661 .last_sysupgrade_partition
= "file-system",
1664 /** Firmware layout for the TL-WA850RE v2 */
1666 .id
= "TLWA850REV2",
1670 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1671 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1672 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1673 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1674 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1675 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1676 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1677 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1678 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1679 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1684 576KB were moved from file-system to os-image
1685 in comparison to the stock image
1688 {"fs-uboot", 0x00000, 0x20000},
1689 {"firmware", 0x20000, 0x390000},
1690 {"partition-table", 0x3b0000, 0x02000},
1691 {"default-mac", 0x3c0000, 0x00020},
1692 {"pin", 0x3c0100, 0x00020},
1693 {"product-info", 0x3c1000, 0x01000},
1694 {"soft-version", 0x3c2000, 0x00100},
1695 {"support-list", 0x3c3000, 0x01000},
1696 {"profile", 0x3c4000, 0x08000},
1697 {"user-config", 0x3d0000, 0x10000},
1698 {"default-config", 0x3e0000, 0x10000},
1699 {"radio", 0x3f0000, 0x10000},
1703 .first_sysupgrade_partition
= "os-image",
1704 .last_sysupgrade_partition
= "file-system"
1707 /** Firmware layout for the TL-WA855RE v1 */
1709 .id
= "TLWA855REV1",
1713 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1714 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1715 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1716 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1717 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1718 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1719 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1720 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1721 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1726 {"fs-uboot", 0x00000, 0x20000},
1727 {"os-image", 0x20000, 0x150000},
1728 {"file-system", 0x170000, 0x240000},
1729 {"partition-table", 0x3b0000, 0x02000},
1730 {"default-mac", 0x3c0000, 0x00020},
1731 {"pin", 0x3c0100, 0x00020},
1732 {"product-info", 0x3c1000, 0x01000},
1733 {"soft-version", 0x3c2000, 0x00100},
1734 {"support-list", 0x3c3000, 0x01000},
1735 {"profile", 0x3c4000, 0x08000},
1736 {"user-config", 0x3d0000, 0x10000},
1737 {"default-config", 0x3e0000, 0x10000},
1738 {"radio", 0x3f0000, 0x10000},
1742 .first_sysupgrade_partition
= "os-image",
1743 .last_sysupgrade_partition
= "file-system"
1746 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1748 .id
= "TL-WPA8630P-V2.0-EU",
1752 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1757 {"factory-uboot", 0x00000, 0x20000},
1758 {"fs-uboot", 0x20000, 0x20000},
1759 {"firmware", 0x40000, 0x5e0000},
1760 {"partition-table", 0x620000, 0x02000},
1761 {"default-mac", 0x630000, 0x00020},
1762 {"pin", 0x630100, 0x00020},
1763 {"device-id", 0x630200, 0x00030},
1764 {"product-info", 0x631100, 0x01000},
1765 {"extra-para", 0x632100, 0x01000},
1766 {"soft-version", 0x640000, 0x01000},
1767 {"support-list", 0x641000, 0x01000},
1768 {"profile", 0x642000, 0x08000},
1769 {"user-config", 0x650000, 0x10000},
1770 {"default-config", 0x660000, 0x10000},
1771 {"default-nvm", 0x670000, 0xc0000},
1772 {"default-pib", 0x730000, 0x40000},
1773 {"radio", 0x7f0000, 0x10000},
1777 .first_sysupgrade_partition
= "os-image",
1778 .last_sysupgrade_partition
= "file-system"
1781 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1783 .id
= "TL-WPA8630P-V2-INT",
1787 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1788 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1789 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1794 {"factory-uboot", 0x00000, 0x20000},
1795 {"fs-uboot", 0x20000, 0x20000},
1796 {"firmware", 0x40000, 0x5e0000},
1797 {"partition-table", 0x620000, 0x02000},
1798 {"extra-para", 0x632100, 0x01000},
1799 {"soft-version", 0x640000, 0x01000},
1800 {"support-list", 0x641000, 0x01000},
1801 {"profile", 0x642000, 0x08000},
1802 {"user-config", 0x650000, 0x10000},
1803 {"default-config", 0x660000, 0x10000},
1804 {"default-nvm", 0x670000, 0xc0000},
1805 {"default-pib", 0x730000, 0x40000},
1806 {"default-mac", 0x7e0000, 0x00020},
1807 {"pin", 0x7e0100, 0x00020},
1808 {"device-id", 0x7e0200, 0x00030},
1809 {"product-info", 0x7e1100, 0x01000},
1810 {"radio", 0x7f0000, 0x10000},
1814 .first_sysupgrade_partition
= "os-image",
1815 .last_sysupgrade_partition
= "file-system"
1818 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1820 .id
= "TL-WPA8630P-V2.1-EU",
1824 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1829 {"factory-uboot", 0x00000, 0x20000},
1830 {"fs-uboot", 0x20000, 0x20000},
1831 {"firmware", 0x40000, 0x5e0000},
1832 {"extra-para", 0x680000, 0x01000},
1833 {"product-info", 0x690000, 0x01000},
1834 {"partition-table", 0x6a0000, 0x02000},
1835 {"soft-version", 0x6b0000, 0x01000},
1836 {"support-list", 0x6b1000, 0x01000},
1837 {"profile", 0x6b2000, 0x08000},
1838 {"user-config", 0x6c0000, 0x10000},
1839 {"default-config", 0x6d0000, 0x10000},
1840 {"default-nvm", 0x6e0000, 0xc0000},
1841 {"default-pib", 0x7a0000, 0x40000},
1842 {"default-mac", 0x7e0000, 0x00020},
1843 {"pin", 0x7e0100, 0x00020},
1844 {"device-id", 0x7e0200, 0x00030},
1845 {"radio", 0x7f0000, 0x10000},
1849 .first_sysupgrade_partition
= "os-image",
1850 .last_sysupgrade_partition
= "file-system"
1853 /** Firmware layout for the TL-WR1043 v5 */
1855 .id
= "TLWR1043NV5",
1859 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1860 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1862 .soft_ver
= "soft_ver:1.0.0\n",
1864 {"factory-boot", 0x00000, 0x20000},
1865 {"fs-uboot", 0x20000, 0x20000},
1866 {"firmware", 0x40000, 0xec0000},
1867 {"default-mac", 0xf00000, 0x00200},
1868 {"pin", 0xf00200, 0x00200},
1869 {"device-id", 0xf00400, 0x00100},
1870 {"product-info", 0xf00500, 0x0fb00},
1871 {"soft-version", 0xf10000, 0x01000},
1872 {"extra-para", 0xf11000, 0x01000},
1873 {"support-list", 0xf12000, 0x0a000},
1874 {"profile", 0xf1c000, 0x04000},
1875 {"default-config", 0xf20000, 0x10000},
1876 {"user-config", 0xf30000, 0x40000},
1877 {"qos-db", 0xf70000, 0x40000},
1878 {"certificate", 0xfb0000, 0x10000},
1879 {"partition-table", 0xfc0000, 0x10000},
1880 {"log", 0xfd0000, 0x20000},
1881 {"radio", 0xff0000, 0x10000},
1884 .first_sysupgrade_partition
= "os-image",
1885 .last_sysupgrade_partition
= "file-system"
1888 /** Firmware layout for the TL-WR1043 v4 */
1890 .id
= "TLWR1043NDV4",
1894 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1898 /* We're using a dynamic kernel/rootfs split here */
1900 {"fs-uboot", 0x00000, 0x20000},
1901 {"firmware", 0x20000, 0xf30000},
1902 {"default-mac", 0xf50000, 0x00200},
1903 {"pin", 0xf50200, 0x00200},
1904 {"product-info", 0xf50400, 0x0fc00},
1905 {"soft-version", 0xf60000, 0x0b000},
1906 {"support-list", 0xf6b000, 0x04000},
1907 {"profile", 0xf70000, 0x04000},
1908 {"default-config", 0xf74000, 0x0b000},
1909 {"user-config", 0xf80000, 0x40000},
1910 {"partition-table", 0xfc0000, 0x10000},
1911 {"log", 0xfd0000, 0x20000},
1912 {"radio", 0xff0000, 0x10000},
1916 .first_sysupgrade_partition
= "os-image",
1917 .last_sysupgrade_partition
= "file-system"
1920 /** Firmware layout for the TL-WR902AC v1 */
1922 .id
= "TL-WR902AC-V1",
1926 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1927 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1932 384KB were moved from file-system to os-image
1933 in comparison to the stock image
1936 {"fs-uboot", 0x00000, 0x20000},
1937 {"firmware", 0x20000, 0x730000},
1938 {"default-mac", 0x750000, 0x00200},
1939 {"pin", 0x750200, 0x00200},
1940 {"product-info", 0x750400, 0x0fc00},
1941 {"soft-version", 0x760000, 0x0b000},
1942 {"support-list", 0x76b000, 0x04000},
1943 {"profile", 0x770000, 0x04000},
1944 {"default-config", 0x774000, 0x0b000},
1945 {"user-config", 0x780000, 0x40000},
1946 {"partition-table", 0x7c0000, 0x10000},
1947 {"log", 0x7d0000, 0x20000},
1948 {"radio", 0x7f0000, 0x10000},
1952 .first_sysupgrade_partition
= "os-image",
1953 .last_sysupgrade_partition
= "file-system",
1956 /** Firmware layout for the TL-WR941HP v1 */
1958 .id
= "TL-WR941HP-V1",
1962 "{product_name:TL-WR941HP,product_ver:1.0.0,special_id:00000000}\n",
1967 {"fs-uboot", 0x00000, 0x20000},
1968 {"firmware", 0x20000, 0x730000},
1969 {"default-mac", 0x750000, 0x00200},
1970 {"pin", 0x750200, 0x00200},
1971 {"product-info", 0x750400, 0x0fc00},
1972 {"soft-version", 0x760000, 0x0b000},
1973 {"support-list", 0x76b000, 0x04000},
1974 {"profile", 0x770000, 0x04000},
1975 {"default-config", 0x774000, 0x0b000},
1976 {"user-config", 0x780000, 0x40000},
1977 {"partition-table", 0x7c0000, 0x10000},
1978 {"log", 0x7d0000, 0x20000},
1979 {"radio", 0x7f0000, 0x10000},
1983 .first_sysupgrade_partition
= "os-image",
1984 .last_sysupgrade_partition
= "file-system",
1987 /** Firmware layout for the TL-WR942N V1 */
1993 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1994 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1999 {"fs-uboot", 0x00000, 0x20000},
2000 {"firmware", 0x20000, 0xe20000},
2001 {"default-mac", 0xe40000, 0x00200},
2002 {"pin", 0xe40200, 0x00200},
2003 {"product-info", 0xe40400, 0x0fc00},
2004 {"partition-table", 0xe50000, 0x10000},
2005 {"soft-version", 0xe60000, 0x10000},
2006 {"support-list", 0xe70000, 0x10000},
2007 {"profile", 0xe80000, 0x10000},
2008 {"default-config", 0xe90000, 0x10000},
2009 {"user-config", 0xea0000, 0x40000},
2010 {"qos-db", 0xee0000, 0x40000},
2011 {"certificate", 0xf20000, 0x10000},
2012 {"usb-config", 0xfb0000, 0x10000},
2013 {"log", 0xfc0000, 0x20000},
2014 {"radio-bk", 0xfe0000, 0x10000},
2015 {"radio", 0xff0000, 0x10000},
2019 .first_sysupgrade_partition
= "os-image",
2020 .last_sysupgrade_partition
= "file-system",
2023 /** Firmware layout for the RE200 v2 */
2029 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
2030 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
2031 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
2032 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
2033 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
2034 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
2035 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
2036 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
2037 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
2038 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
2039 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
2040 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
2041 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
2046 {"fs-uboot", 0x00000, 0x20000},
2047 {"firmware", 0x20000, 0x7a0000},
2048 {"partition-table", 0x7c0000, 0x02000},
2049 {"default-mac", 0x7c2000, 0x00020},
2050 {"pin", 0x7c2100, 0x00020},
2051 {"product-info", 0x7c3100, 0x01000},
2052 {"soft-version", 0x7c4200, 0x01000},
2053 {"support-list", 0x7c5200, 0x01000},
2054 {"profile", 0x7c6200, 0x08000},
2055 {"config-info", 0x7ce200, 0x00400},
2056 {"user-config", 0x7d0000, 0x10000},
2057 {"default-config", 0x7e0000, 0x10000},
2058 {"radio", 0x7f0000, 0x10000},
2062 .first_sysupgrade_partition
= "os-image",
2063 .last_sysupgrade_partition
= "file-system"
2066 /** Firmware layout for the RE200 v3 */
2072 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
2073 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
2074 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
2075 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
2076 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
2077 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
2078 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
2079 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
2080 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
2081 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
2082 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
2083 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
2084 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
2085 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
2090 {"fs-uboot", 0x00000, 0x20000},
2091 {"firmware", 0x20000, 0x7a0000},
2092 {"partition-table", 0x7c0000, 0x02000},
2093 {"default-mac", 0x7c2000, 0x00020},
2094 {"pin", 0x7c2100, 0x00020},
2095 {"product-info", 0x7c3100, 0x01000},
2096 {"soft-version", 0x7c4200, 0x01000},
2097 {"support-list", 0x7c5200, 0x01000},
2098 {"profile", 0x7c6200, 0x08000},
2099 {"config-info", 0x7ce200, 0x00400},
2100 {"user-config", 0x7d0000, 0x10000},
2101 {"default-config", 0x7e0000, 0x10000},
2102 {"radio", 0x7f0000, 0x10000},
2106 .first_sysupgrade_partition
= "os-image",
2107 .last_sysupgrade_partition
= "file-system"
2110 /** Firmware layout for the RE200 v4 */
2116 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2117 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2118 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2119 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2120 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2121 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2122 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2123 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2124 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2125 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2126 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2127 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2128 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2129 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2131 .soft_ver
= "soft_ver:1.1.0\n",
2134 {"fs-uboot", 0x00000, 0x20000},
2135 {"firmware", 0x20000, 0x7a0000},
2136 {"partition-table", 0x7c0000, 0x02000},
2137 {"default-mac", 0x7c2000, 0x00020},
2138 {"pin", 0x7c2100, 0x00020},
2139 {"product-info", 0x7c3100, 0x01000},
2140 {"soft-version", 0x7c4200, 0x01000},
2141 {"support-list", 0x7c5200, 0x01000},
2142 {"profile", 0x7c6200, 0x08000},
2143 {"config-info", 0x7ce200, 0x00400},
2144 {"user-config", 0x7d0000, 0x10000},
2145 {"default-config", 0x7e0000, 0x10000},
2146 {"radio", 0x7f0000, 0x10000},
2150 .first_sysupgrade_partition
= "os-image",
2151 .last_sysupgrade_partition
= "file-system"
2154 /** Firmware layout for the RE220 v2 */
2160 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2161 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2162 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2163 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2164 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2165 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2166 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2167 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2168 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2169 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2170 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2171 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2172 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2177 {"fs-uboot", 0x00000, 0x20000},
2178 {"firmware", 0x20000, 0x7a0000},
2179 {"partition-table", 0x7c0000, 0x02000},
2180 {"default-mac", 0x7c2000, 0x00020},
2181 {"pin", 0x7c2100, 0x00020},
2182 {"product-info", 0x7c3100, 0x01000},
2183 {"soft-version", 0x7c4200, 0x01000},
2184 {"support-list", 0x7c5200, 0x01000},
2185 {"profile", 0x7c6200, 0x08000},
2186 {"config-info", 0x7ce200, 0x00400},
2187 {"user-config", 0x7d0000, 0x10000},
2188 {"default-config", 0x7e0000, 0x10000},
2189 {"radio", 0x7f0000, 0x10000},
2193 .first_sysupgrade_partition
= "os-image",
2194 .last_sysupgrade_partition
= "file-system"
2197 /** Firmware layout for the RE305 v1 */
2203 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2204 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2205 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2206 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2207 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2208 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2209 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2214 {"fs-uboot", 0x00000, 0x20000},
2215 {"firmware", 0x20000, 0x5e0000},
2216 {"partition-table", 0x600000, 0x02000},
2217 {"default-mac", 0x610000, 0x00020},
2218 {"pin", 0x610100, 0x00020},
2219 {"product-info", 0x611100, 0x01000},
2220 {"soft-version", 0x620000, 0x01000},
2221 {"support-list", 0x621000, 0x01000},
2222 {"profile", 0x622000, 0x08000},
2223 {"user-config", 0x630000, 0x10000},
2224 {"default-config", 0x640000, 0x10000},
2225 {"radio", 0x7f0000, 0x10000},
2229 .first_sysupgrade_partition
= "os-image",
2230 .last_sysupgrade_partition
= "file-system"
2233 /** Firmware layout for the RE350 v1 */
2239 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2240 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2241 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2242 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2243 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2244 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2245 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2249 /** We're using a dynamic kernel/rootfs split here */
2251 {"fs-uboot", 0x00000, 0x20000},
2252 {"firmware", 0x20000, 0x5e0000},
2253 {"partition-table", 0x600000, 0x02000},
2254 {"default-mac", 0x610000, 0x00020},
2255 {"pin", 0x610100, 0x00020},
2256 {"product-info", 0x611100, 0x01000},
2257 {"soft-version", 0x620000, 0x01000},
2258 {"support-list", 0x621000, 0x01000},
2259 {"profile", 0x622000, 0x08000},
2260 {"user-config", 0x630000, 0x10000},
2261 {"default-config", 0x640000, 0x10000},
2262 {"radio", 0x7f0000, 0x10000},
2266 .first_sysupgrade_partition
= "os-image",
2267 .last_sysupgrade_partition
= "file-system"
2270 /** Firmware layout for the RE350K v1 */
2276 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2280 /** We're using a dynamic kernel/rootfs split here */
2282 {"fs-uboot", 0x00000, 0x20000},
2283 {"firmware", 0x20000, 0xd70000},
2284 {"partition-table", 0xd90000, 0x02000},
2285 {"default-mac", 0xda0000, 0x00020},
2286 {"pin", 0xda0100, 0x00020},
2287 {"product-info", 0xda1100, 0x01000},
2288 {"soft-version", 0xdb0000, 0x01000},
2289 {"support-list", 0xdb1000, 0x01000},
2290 {"profile", 0xdb2000, 0x08000},
2291 {"user-config", 0xdc0000, 0x10000},
2292 {"default-config", 0xdd0000, 0x10000},
2293 {"device-id", 0xde0000, 0x00108},
2294 {"radio", 0xff0000, 0x10000},
2298 .first_sysupgrade_partition
= "os-image",
2299 .last_sysupgrade_partition
= "file-system"
2302 /** Firmware layout for the RE355 */
2308 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2309 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2310 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2311 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2312 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2313 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2314 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2315 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2319 /* We're using a dynamic kernel/rootfs split here */
2321 {"fs-uboot", 0x00000, 0x20000},
2322 {"firmware", 0x20000, 0x5e0000},
2323 {"partition-table", 0x600000, 0x02000},
2324 {"default-mac", 0x610000, 0x00020},
2325 {"pin", 0x610100, 0x00020},
2326 {"product-info", 0x611100, 0x01000},
2327 {"soft-version", 0x620000, 0x01000},
2328 {"support-list", 0x621000, 0x01000},
2329 {"profile", 0x622000, 0x08000},
2330 {"user-config", 0x630000, 0x10000},
2331 {"default-config", 0x640000, 0x10000},
2332 {"radio", 0x7f0000, 0x10000},
2336 .first_sysupgrade_partition
= "os-image",
2337 .last_sysupgrade_partition
= "file-system"
2340 /** Firmware layout for the RE450 */
2346 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2347 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2348 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2349 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2350 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2351 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2352 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2353 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2357 /** We're using a dynamic kernel/rootfs split here */
2359 {"fs-uboot", 0x00000, 0x20000},
2360 {"firmware", 0x20000, 0x5e0000},
2361 {"partition-table", 0x600000, 0x02000},
2362 {"default-mac", 0x610000, 0x00020},
2363 {"pin", 0x610100, 0x00020},
2364 {"product-info", 0x611100, 0x01000},
2365 {"soft-version", 0x620000, 0x01000},
2366 {"support-list", 0x621000, 0x01000},
2367 {"profile", 0x622000, 0x08000},
2368 {"user-config", 0x630000, 0x10000},
2369 {"default-config", 0x640000, 0x10000},
2370 {"radio", 0x7f0000, 0x10000},
2374 .first_sysupgrade_partition
= "os-image",
2375 .last_sysupgrade_partition
= "file-system"
2378 /** Firmware layout for the RE450 v2 */
2384 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2385 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2386 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2387 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2388 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2389 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2390 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2391 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2392 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2396 /* We're using a dynamic kernel/rootfs split here */
2398 {"fs-uboot", 0x00000, 0x20000},
2399 {"firmware", 0x20000, 0x5e0000},
2400 {"partition-table", 0x600000, 0x02000},
2401 {"default-mac", 0x610000, 0x00020},
2402 {"pin", 0x610100, 0x00020},
2403 {"product-info", 0x611100, 0x01000},
2404 {"soft-version", 0x620000, 0x01000},
2405 {"support-list", 0x621000, 0x01000},
2406 {"profile", 0x622000, 0x08000},
2407 {"user-config", 0x630000, 0x10000},
2408 {"default-config", 0x640000, 0x10000},
2409 {"radio", 0x7f0000, 0x10000},
2413 .first_sysupgrade_partition
= "os-image",
2414 .last_sysupgrade_partition
= "file-system"
2417 /** Firmware layout for the RE450 v3 */
2423 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2424 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2425 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2426 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2427 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2428 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2429 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2430 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2431 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2435 /* We're using a dynamic kernel/rootfs split here */
2437 {"fs-uboot", 0x00000, 0x20000},
2438 {"default-mac", 0x20000, 0x00020},
2439 {"pin", 0x20020, 0x00020},
2440 {"product-info", 0x21000, 0x01000},
2441 {"partition-table", 0x22000, 0x02000},
2442 {"soft-version", 0x24000, 0x01000},
2443 {"support-list", 0x25000, 0x01000},
2444 {"profile", 0x26000, 0x08000},
2445 {"user-config", 0x2e000, 0x10000},
2446 {"default-config", 0x3e000, 0x10000},
2447 {"config-info", 0x4e000, 0x00400},
2448 {"firmware", 0x50000, 0x7a0000},
2449 {"radio", 0x7f0000, 0x10000},
2453 .first_sysupgrade_partition
= "os-image",
2454 .last_sysupgrade_partition
= "file-system"
2457 /** Firmware layout for the RE455 v1 */
2463 "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
2464 "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
2465 "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
2466 "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
2467 "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
2468 "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
2469 "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
2470 "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
2471 "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
2475 /* We're using a dynamic kernel/rootfs split here */
2477 {"fs-uboot", 0x00000, 0x20000},
2478 {"default-mac", 0x20000, 0x00020},
2479 {"pin", 0x20020, 0x00020},
2480 {"product-info", 0x21000, 0x01000},
2481 {"partition-table", 0x22000, 0x02000},
2482 {"soft-version", 0x24000, 0x01000},
2483 {"support-list", 0x25000, 0x01000},
2484 {"profile", 0x26000, 0x08000},
2485 {"user-config", 0x2e000, 0x10000},
2486 {"default-config", 0x3e000, 0x10000},
2487 {"config-info", 0x4e000, 0x00400},
2488 {"firmware", 0x50000, 0x7a0000},
2489 {"radio", 0x7f0000, 0x10000},
2493 .first_sysupgrade_partition
= "os-image",
2494 .last_sysupgrade_partition
= "file-system"
2497 /** Firmware layout for the RE500 */
2503 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2504 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2505 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2506 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2507 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2508 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2509 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2513 /* We're using a dynamic kernel/rootfs split here */
2515 {"fs-uboot", 0x00000, 0x20000},
2516 {"firmware", 0x20000, 0xde0000},
2517 {"partition-table", 0xe00000, 0x02000},
2518 {"default-mac", 0xe10000, 0x00020},
2519 {"pin", 0xe10100, 0x00020},
2520 {"product-info", 0xe11100, 0x01000},
2521 {"soft-version", 0xe20000, 0x01000},
2522 {"support-list", 0xe21000, 0x01000},
2523 {"profile", 0xe22000, 0x08000},
2524 {"user-config", 0xe30000, 0x10000},
2525 {"default-config", 0xe40000, 0x10000},
2526 {"radio", 0xff0000, 0x10000},
2530 .first_sysupgrade_partition
= "os-image",
2531 .last_sysupgrade_partition
= "file-system"
2534 /** Firmware layout for the RE650 */
2540 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2541 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2542 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2543 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2544 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2545 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2546 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2550 /* We're using a dynamic kernel/rootfs split here */
2552 {"fs-uboot", 0x00000, 0x20000},
2553 {"firmware", 0x20000, 0xde0000},
2554 {"partition-table", 0xe00000, 0x02000},
2555 {"default-mac", 0xe10000, 0x00020},
2556 {"pin", 0xe10100, 0x00020},
2557 {"product-info", 0xe11100, 0x01000},
2558 {"soft-version", 0xe20000, 0x01000},
2559 {"support-list", 0xe21000, 0x01000},
2560 {"profile", 0xe22000, 0x08000},
2561 {"user-config", 0xe30000, 0x10000},
2562 {"default-config", 0xe40000, 0x10000},
2563 {"radio", 0xff0000, 0x10000},
2567 .first_sysupgrade_partition
= "os-image",
2568 .last_sysupgrade_partition
= "file-system"
2574 #define error(_ret, _errno, _str, ...) \
2576 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2577 strerror(_errno)); \
2583 /** Stores a uint32 as big endian */
2584 static inline void put32(uint8_t *buf
, uint32_t val
) {
2591 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2593 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2596 /** Allocate a padded meta partition with a correctly initialised header
2597 * If the `data` pointer is NULL, then the required space is only allocated,
2598 * otherwise `data_len` bytes will be copied from `data` into the partition
2600 static struct image_partition_entry
init_meta_partition_entry(
2601 const char *name
, const void *data
, uint32_t data_len
,
2602 enum partition_trail_value pad_value
)
2604 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2605 if (meta_partition_should_pad(pad_value
))
2608 struct image_partition_entry entry
= {
2611 .data
= malloc(total_len
)
2614 error(1, errno
, "failed to allocate meta partition entry");
2616 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2617 header
->length
= htonl(data_len
);
2621 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2623 if (meta_partition_should_pad(pad_value
))
2624 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2629 /** Allocates a new image partition */
2630 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2631 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2633 error(1, errno
, "malloc");
2638 /** Frees an image partition */
2639 static void free_image_partition(struct image_partition_entry entry
) {
2643 static time_t source_date_epoch
= -1;
2644 static void set_source_date_epoch() {
2645 char *env
= getenv("SOURCE_DATE_EPOCH");
2649 source_date_epoch
= strtoull(env
, &endptr
, 10);
2650 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2651 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2657 /** Generates the partition-table partition */
2658 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2659 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2661 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2669 for (i
= 0; p
[i
].name
; i
++) {
2671 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2674 error(1, 0, "flash partition table overflow?");
2681 memset(s
, 0xff, end
-s
);
2687 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2688 static inline uint8_t bcd(uint8_t v
) {
2689 return 0x10 * (v
/10) + v
%10;
2693 /** Generates the soft-version partition */
2694 static struct image_partition_entry
make_soft_version(
2695 const struct device_info
*info
, uint32_t rev
)
2697 /** If an info string is provided, use this instead of
2698 * the structured data, and include the null-termination */
2699 if (info
->soft_ver
) {
2700 uint32_t len
= strlen(info
->soft_ver
) + 1;
2701 return init_meta_partition_entry("soft-version",
2702 info
->soft_ver
, len
, info
->part_trail
);
2707 if (source_date_epoch
!= -1)
2708 t
= source_date_epoch
;
2709 else if (time(&t
) == (time_t)(-1))
2710 error(1, errno
, "time");
2712 struct tm
*tm
= gmtime(&t
);
2714 struct soft_version s
= {
2721 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2722 .year_lo
= bcd(tm
->tm_year
%100),
2723 .month
= bcd(tm
->tm_mon
+1),
2724 .day
= bcd(tm
->tm_mday
),
2726 .compat_level
= htonl(info
->soft_ver_compat_level
)
2729 if (info
->soft_ver_compat_level
== 0)
2730 return init_meta_partition_entry("soft-version", &s
,
2731 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2734 return init_meta_partition_entry("soft-version", &s
,
2735 sizeof(s
), info
->part_trail
);
2738 /** Generates the support-list partition */
2739 static struct image_partition_entry
make_support_list(
2740 const struct device_info
*info
)
2742 uint32_t len
= strlen(info
->support_list
);
2743 return init_meta_partition_entry("support-list", info
->support_list
,
2744 len
, info
->part_trail
);
2747 /** Partition with extra-para data */
2748 static struct image_partition_entry
make_extra_para(
2749 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2751 return init_meta_partition_entry("extra-para", extra_para
, len
,
2755 /** Creates a new image partition with an arbitrary name from a file */
2756 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2757 struct stat statbuf
;
2759 if (stat(filename
, &statbuf
) < 0)
2760 error(1, errno
, "unable to stat file `%s'", filename
);
2762 size_t len
= statbuf
.st_size
;
2764 if (add_jffs2_eof
) {
2765 if (file_system_partition
)
2766 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2768 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2771 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2773 FILE *file
= fopen(filename
, "rb");
2775 error(1, errno
, "unable to open file `%s'", filename
);
2777 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2778 error(1, errno
, "unable to read file `%s'", filename
);
2780 if (add_jffs2_eof
) {
2781 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2783 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2784 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2793 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2795 Example image partition table:
2797 fwup-ptn partition-table base 0x00800 size 0x00800
2798 fwup-ptn os-image base 0x01000 size 0x113b45
2799 fwup-ptn file-system base 0x114b45 size 0x1d0004
2800 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2802 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2803 the end of the partition table is marked with a zero byte.
2805 The firmware image must contain at least the partition-table and support-list partitions
2806 to be accepted. There aren't any alignment constraints for the image partitions.
2808 The partition-table partition contains the actual flash layout; partitions
2809 from the image partition table are mapped to the corresponding flash partitions during
2810 the firmware upgrade. The support-list partition contains a list of devices supported by
2813 The base offsets in the firmware partition table are relative to the end
2814 of the vendor information block, so the partition-table partition will
2815 actually start at offset 0x1814 of the image.
2817 I think partition-table must be the first partition in the firmware image.
2819 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2821 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2823 size_t base
= 0x800;
2824 for (i
= 0; parts
[i
].name
; i
++) {
2825 for (j
= 0; flash_parts
[j
].name
; j
++) {
2826 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2827 if (parts
[i
].size
> flash_parts
[j
].size
)
2828 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2833 assert(flash_parts
[j
].name
);
2835 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2837 size_t len
= end
-image_pt
;
2838 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2841 error(1, 0, "image partition table overflow?");
2845 base
+= parts
[i
].size
;
2849 /** Generates and writes the image MD5 checksum */
2850 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2854 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2855 MD5_Update(&ctx
, buffer
, len
);
2856 MD5_Final(md5
, &ctx
);
2861 Generates the firmware image in factory format
2867 0000-0003 Image size (4 bytes, big endian)
2868 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2869 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2870 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2871 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2872 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2873 1814-xxxx Firmware partitions
2875 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2879 for (i
= 0; parts
[i
].name
; i
++)
2880 *len
+= parts
[i
].size
;
2882 uint8_t *image
= malloc(*len
);
2884 error(1, errno
, "malloc");
2886 memset(image
, 0xff, *len
);
2890 size_t vendor_len
= strlen(info
->vendor
);
2891 put32(image
+0x14, vendor_len
);
2892 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2895 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2896 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2902 Generates the firmware image in sysupgrade format
2904 This makes some assumptions about the provided flash and image partition tables and
2905 should be generalized when TP-LINK starts building its safeloader into hardware with
2906 different flash layouts.
2908 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2910 size_t flash_first_partition_index
= 0;
2911 size_t flash_last_partition_index
= 0;
2912 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2913 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2914 const struct image_partition_entry
*image_last_partition
= NULL
;
2916 /** Find first and last partitions */
2917 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2918 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2919 flash_first_partition
= &info
->partitions
[i
];
2920 flash_first_partition_index
= i
;
2921 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2922 flash_last_partition
= &info
->partitions
[i
];
2923 flash_last_partition_index
= i
;
2927 assert(flash_first_partition
&& flash_last_partition
);
2928 assert(flash_first_partition_index
< flash_last_partition_index
);
2930 /** Find last partition from image to calculate needed size */
2931 for (i
= 0; image_parts
[i
].name
; i
++) {
2932 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2933 image_last_partition
= &image_parts
[i
];
2938 assert(image_last_partition
);
2940 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2942 uint8_t *image
= malloc(*len
);
2944 error(1, errno
, "malloc");
2946 memset(image
, 0xff, *len
);
2948 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2949 for (j
= 0; image_parts
[j
].name
; j
++) {
2950 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2951 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2952 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2953 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2957 assert(image_parts
[j
].name
);
2964 /** Generates an image according to a given layout and writes it to a file */
2965 static void build_image(const char *output
,
2966 const char *kernel_image
,
2967 const char *rootfs_image
,
2971 struct device_info
*info
) {
2975 struct image_partition_entry parts
[7] = {};
2977 struct flash_partition_entry
*firmware_partition
= NULL
;
2978 struct flash_partition_entry
*os_image_partition
= NULL
;
2979 struct flash_partition_entry
*file_system_partition
= NULL
;
2980 size_t firmware_partition_index
= 0;
2982 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2983 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2985 firmware_partition
= &info
->partitions
[i
];
2986 firmware_partition_index
= i
;
2990 if (firmware_partition
)
2992 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2993 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2996 if (stat(kernel_image
, &kernel
) < 0)
2997 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2999 if (kernel
.st_size
> firmware_partition
->size
)
3000 error(1, 0, "kernel overflowed firmware partition\n");
3002 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
3003 info
->partitions
[i
+1] = info
->partitions
[i
];
3005 file_system_partition
->name
= "file-system";
3006 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
3008 /* Align partition start to erase blocks for factory images only */
3010 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
3012 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
3014 os_image_partition
->name
= "os-image";
3015 os_image_partition
->size
= kernel
.st_size
;
3018 parts
[0] = make_partition_table(info
->partitions
);
3019 parts
[1] = make_soft_version(info
, rev
);
3020 parts
[2] = make_support_list(info
);
3021 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
3022 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
3024 /* Some devices need the extra-para partition to accept the firmware */
3025 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
3026 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
3027 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
3028 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
3029 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
3030 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
3031 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
3032 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
3033 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
3034 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
3035 strcasecmp(info
->id
, "ARCHER-C6-V3") == 0 ||
3036 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
3037 const uint8_t extra_para
[2] = {0x01, 0x00};
3038 parts
[5] = make_extra_para(info
, extra_para
,
3039 sizeof(extra_para
));
3040 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0 ||
3041 strcasecmp(info
->id
, "TL-WA1201-V2") == 0) {
3042 const uint8_t extra_para
[2] = {0x00, 0x01};
3043 parts
[5] = make_extra_para(info
, extra_para
,
3044 sizeof(extra_para
));
3045 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
3046 strcasecmp(info
->id
, "EAP245-V3") == 0) {
3047 const uint8_t extra_para
[2] = {0x01, 0x01};
3048 parts
[5] = make_extra_para(info
, extra_para
,
3049 sizeof(extra_para
));
3055 image
= generate_sysupgrade_image(info
, parts
, &len
);
3057 image
= generate_factory_image(info
, parts
, &len
);
3059 FILE *file
= fopen(output
, "wb");
3061 error(1, errno
, "unable to open output file");
3063 if (fwrite(image
, len
, 1, file
) != 1)
3064 error(1, 0, "unable to write output file");
3070 for (i
= 0; parts
[i
].name
; i
++)
3071 free_image_partition(parts
[i
]);
3075 static void usage(const char *argv0
) {
3077 "Usage: %s [OPTIONS...]\n"
3080 " -h show this help\n"
3082 "Info about an image:\n"
3083 " -i <file> input file to read from\n"
3084 "Create a new image:\n"
3085 " -B <board> create image for the board specified with <board>\n"
3086 " -k <file> read kernel image from the file <file>\n"
3087 " -r <file> read rootfs image from the file <file>\n"
3088 " -o <file> write output to the file <file>\n"
3089 " -V <rev> sets the revision number to <rev>\n"
3090 " -j add jffs2 end-of-filesystem markers\n"
3091 " -S create sysupgrade instead of factory image\n"
3092 "Extract an old image:\n"
3093 " -x <file> extract all oem firmware partition\n"
3094 " -d <dir> destination to extract the firmware partition\n"
3095 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
3101 static struct device_info
*find_board(const char *id
)
3103 struct device_info
*board
= NULL
;
3105 for (board
= boards
; board
->id
!= NULL
; board
++)
3106 if (strcasecmp(id
, board
->id
) == 0)
3112 static int add_flash_partition(
3113 struct flash_partition_entry
*part_list
,
3120 /* check if the list has a free entry */
3121 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
3122 if (part_list
->name
== NULL
&&
3123 part_list
->base
== 0 &&
3124 part_list
->size
== 0)
3128 if (ptr
== max_entries
) {
3129 error(1, 0, "No free flash part entry available.");
3132 part_list
->name
= calloc(1, strlen(name
) + 1);
3133 if (!part_list
->name
) {
3134 error(1, 0, "Unable to allocate memory");
3137 memcpy((char *)part_list
->name
, name
, strlen(name
));
3138 part_list
->base
= base
;
3139 part_list
->size
= size
;
3144 /** read the partition table into struct flash_partition_entry */
3145 static int read_partition_table(
3146 FILE *file
, long offset
,
3147 struct flash_partition_entry
*entries
, size_t max_entries
,
3152 const char *parthdr
= NULL
;
3153 const char *fwuphdr
= "fwup-ptn";
3154 const char *flashhdr
= "partition";
3156 /* TODO: search for the partition table */
3166 error(1, 0, "Invalid partition table");
3169 if (fseek(file
, offset
, SEEK_SET
) < 0)
3170 error(1, errno
, "Can not seek in the firmware");
3172 if (fread(buf
, 2048, 1, file
) != 1)
3173 error(1, errno
, "Can not read fwup-ptn from the firmware");
3177 /* look for the partition header */
3178 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3179 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3184 end
= buf
+ sizeof(buf
);
3185 while ((ptr
+ strlen(parthdr
)) < end
&&
3186 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3190 char name
[32] = { 0 };
3192 unsigned long base
= 0;
3193 unsigned long size
= 0;
3195 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3196 if (end_part
== NULL
) {
3197 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3201 for (int i
= 0; i
<= 4; i
++) {
3202 if (end_part
<= ptr
)
3205 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3206 if (end_element
== NULL
) {
3207 error(1, errno
, "Ignoring the rest of the partition entries.");
3212 /* partition header */
3214 ptr
= end_element
+ 1;
3218 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3219 strncpy(name
, ptr
, name_len
);
3220 name
[name_len
] = '\0';
3221 ptr
= end_element
+ 1;
3226 ptr
= end_element
+ 1;
3231 base
= strtoul(ptr
, NULL
, 16);
3232 ptr
= end_element
+ 1;
3237 ptr
= end_element
+ 1;
3238 /* actual size. The last element doesn't have a sepeartor */
3239 size
= strtoul(ptr
, NULL
, 16);
3240 /* the part ends with 0x09, 0x0d, 0x0a */
3242 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3251 static void write_partition(
3253 size_t firmware_offset
,
3254 struct flash_partition_entry
*entry
,
3260 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3262 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3263 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3264 error(1, errno
, "Can not read partition from input_file");
3266 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3267 error(1, errno
, "Can not write partition to output_file");
3269 /* write last chunk smaller than buffer */
3270 if (offset
< entry
->size
) {
3271 offset
= entry
->size
- offset
;
3272 if (fread(buf
, offset
, 1, input_file
) != 1)
3273 error(1, errno
, "Can not read partition from input_file");
3274 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3275 error(1, errno
, "Can not write partition to output_file");
3279 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3282 char output
[PATH_MAX
];
3284 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3285 output_file
= fopen(output
, "wb+");
3286 if (output_file
== NULL
) {
3287 error(1, errno
, "Can not open output file %s", output
);
3290 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3292 fclose(output_file
);
3297 /** extract all partitions from the firmware file */
3298 static int extract_firmware(const char *input
, const char *output_directory
)
3300 struct flash_partition_entry entries
[16] = { 0 };
3301 size_t max_entries
= 16;
3302 size_t firmware_offset
= 0x1014;
3305 struct stat statbuf
;
3307 /* check input file */
3308 if (stat(input
, &statbuf
)) {
3309 error(1, errno
, "Can not read input firmware %s", input
);
3312 /* check if output directory exists */
3313 if (stat(output_directory
, &statbuf
)) {
3314 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3317 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3318 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3321 input_file
= fopen(input
, "rb");
3323 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3324 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3327 for (size_t i
= 0; i
< max_entries
; i
++) {
3328 if (entries
[i
].name
== NULL
&&
3329 entries
[i
].base
== 0 &&
3330 entries
[i
].size
== 0)
3333 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3339 static struct flash_partition_entry
*find_partition(
3340 struct flash_partition_entry
*entries
, size_t max_entries
,
3341 const char *name
, const char *error_msg
)
3343 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3344 if (strcmp(entries
->name
, name
) == 0)
3349 error(1, 0, "%s", error_msg
);
3355 static int firmware_info(const char *input
)
3357 struct flash_partition_entry pointers
[MAX_PARTITIONS
] = { };
3358 struct flash_partition_entry
*e
;
3362 fp
= fopen(input
, "r");
3364 if (read_partition_table(fp
, 0x1014, pointers
, MAX_PARTITIONS
, 0)) {
3365 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3368 printf("Firmware image partitions:\n");
3369 printf("%-8s %-8s %s\n", "base", "size", "name");
3370 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3373 if (!e
->name
&& !e
->base
&& !e
->size
)
3376 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3379 e
= find_partition(pointers
, MAX_PARTITIONS
, "soft-version", NULL
);
3381 size_t data_len
= e
->size
- sizeof(struct meta_header
);
3382 char *buf
= malloc(data_len
);
3383 struct soft_version
*s
;
3388 error(1, errno
, "Failed to alloc buffer");
3390 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3391 error(1, errno
, "Can not seek in the firmware");
3393 if (fread(buf
, data_len
, 1, fp
) != 1)
3394 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3396 /* Check for string ignoring padding character */
3398 for (i
= 0; i
< data_len
- 1; i
++) {
3399 if (!isascii(buf
[i
])) {
3405 printf("\n[Software version]\n");
3407 fwrite(buf
, data_len
, 1, stdout
);
3409 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
3410 s
= (struct soft_version
*)buf
;
3412 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
3413 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
3415 printf("Failed to parse data\n");
3421 e
= find_partition(pointers
, MAX_PARTITIONS
, "support-list", NULL
);
3427 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3428 error(1, errno
, "Can not seek in the firmware");
3430 printf("\n[Support list]\n");
3431 for (length
= e
->size
- sizeof(struct meta_header
); length
; length
-= bytes
) {
3432 bytes
= fread(buf
, 1, length
> sizeof(buf
) ? sizeof(buf
) : length
, fp
);
3434 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3440 e
= find_partition(pointers
, MAX_PARTITIONS
, "partition-table", NULL
);
3442 struct flash_partition_entry parts
[MAX_PARTITIONS
] = { };
3444 if (read_partition_table(fp
, 0x1014 + e
->base
+ 4, parts
, MAX_PARTITIONS
, 1)) {
3445 error(1, 0, "Error can not read the partition table (partition)");
3448 printf("\n[Partition table]\n");
3449 printf("%-8s %-8s %s\n", "base", "size", "name");
3450 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3453 if (!e
->name
&& !e
->base
&& !e
->size
)
3456 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3465 static void write_ff(FILE *output_file
, size_t size
)
3470 memset(buf
, 0xff, sizeof(buf
));
3472 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3473 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3474 error(1, errno
, "Can not write 0xff to output_file");
3477 /* write last chunk smaller than buffer */
3478 if (offset
< size
) {
3479 offset
= size
- offset
;
3480 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3481 error(1, errno
, "Can not write partition to output_file");
3485 static void convert_firmware(const char *input
, const char *output
)
3487 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3488 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3489 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3490 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3491 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3492 size_t firmware_offset
= 0x1014;
3493 FILE *input_file
, *output_file
;
3495 struct stat statbuf
;
3497 /* check input file */
3498 if (stat(input
, &statbuf
)) {
3499 error(1, errno
, "Can not read input firmware %s", input
);
3502 input_file
= fopen(input
, "rb");
3504 error(1, 0, "Can not open input firmware %s", input
);
3506 output_file
= fopen(output
, "wb");
3508 error(1, 0, "Can not open output firmware %s", output
);
3510 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3511 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3514 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3515 "os-image", "Error can not find os-image partition (fwup)");
3516 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3517 "file-system", "Error can not find file-system partition (fwup)");
3518 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3519 "partition-table", "Error can not find partition-table partition");
3521 /* the flash partition table has a 0x00000004 magic haeder */
3522 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3523 error(1, 0, "Error can not read the partition table (flash)");
3525 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3526 "os-image", "Error can not find os-image partition (flash)");
3527 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3528 "file-system", "Error can not find file-system partition (flash)");
3530 /* write os_image to 0x0 */
3531 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3532 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3534 /* write file-system behind os_image */
3535 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3536 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3537 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3539 fclose(output_file
);
3543 int main(int argc
, char *argv
[]) {
3544 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3545 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3546 bool add_jffs2_eof
= false, sysupgrade
= false;
3548 struct device_info
*info
;
3549 set_source_date_epoch();
3554 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
3560 info_image
= optarg
;
3568 kernel_image
= optarg
;
3572 rootfs_image
= optarg
;
3580 sscanf(optarg
, "r%u", &rev
);
3584 add_jffs2_eof
= true;
3596 output_directory
= optarg
;
3600 extract_image
= optarg
;
3604 convert_image
= optarg
;
3614 firmware_info(info_image
);
3615 } else if (extract_image
|| output_directory
) {
3617 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3618 if (!output_directory
)
3619 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3620 extract_firmware(extract_image
, output_directory
);
3621 } else if (convert_image
) {
3623 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3624 convert_firmware(convert_image
, output
);
3627 error(1, 0, "no board has been specified");
3629 error(1, 0, "no kernel image has been specified");
3631 error(1, 0, "no rootfs image has been specified");
3633 error(1, 0, "no output filename has been specified");
3635 info
= find_board(board
);
3638 error(1, 0, "unsupported board %s", board
);
3640 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);