2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 uint32_t soft_ver_compat_level
;
81 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
82 const char *first_sysupgrade_partition
;
83 const char *last_sysupgrade_partition
;
86 /** The content of the soft-version structure */
87 struct __attribute__((__packed__
)) soft_version
{
91 uint8_t version_major
;
92 uint8_t version_minor
;
93 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the EAP245 v3 */
1306 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1307 .support_trail
= '\xff',
1309 .soft_ver_compat_level
= 1,
1311 /** Firmware partition with dynamic kernel/rootfs split */
1313 {"factroy-boot", 0x00000, 0x40000},
1314 {"fs-uboot", 0x40000, 0x40000},
1315 {"partition-table", 0x80000, 0x10000},
1316 {"default-mac", 0x90000, 0x01000},
1317 {"support-list", 0x91000, 0x00100},
1318 {"product-info", 0x91100, 0x00400},
1319 {"soft-version", 0x92000, 0x00100},
1320 {"radio", 0xa0000, 0x10000},
1321 {"extra-para", 0xb0000, 0x10000},
1322 {"firmware", 0xc0000, 0xe40000},
1323 {"config", 0xf00000, 0x30000},
1324 {"mutil-log", 0xf30000, 0x80000},
1325 {"oops", 0xfb0000, 0x40000},
1329 .first_sysupgrade_partition
= "os-image",
1330 .last_sysupgrade_partition
= "file-system"
1333 /** Firmware layout for the TL-WA850RE v2 */
1335 .id
= "TLWA850REV2",
1339 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1340 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1341 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1342 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1343 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1344 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1345 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1346 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1347 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1348 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1349 .support_trail
= '\x00',
1353 576KB were moved from file-system to os-image
1354 in comparison to the stock image
1357 {"fs-uboot", 0x00000, 0x20000},
1358 {"firmware", 0x20000, 0x390000},
1359 {"partition-table", 0x3b0000, 0x02000},
1360 {"default-mac", 0x3c0000, 0x00020},
1361 {"pin", 0x3c0100, 0x00020},
1362 {"product-info", 0x3c1000, 0x01000},
1363 {"soft-version", 0x3c2000, 0x00100},
1364 {"support-list", 0x3c3000, 0x01000},
1365 {"profile", 0x3c4000, 0x08000},
1366 {"user-config", 0x3d0000, 0x10000},
1367 {"default-config", 0x3e0000, 0x10000},
1368 {"radio", 0x3f0000, 0x10000},
1372 .first_sysupgrade_partition
= "os-image",
1373 .last_sysupgrade_partition
= "file-system"
1376 /** Firmware layout for the TL-WA855RE v1 */
1378 .id
= "TLWA855REV1",
1382 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1383 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1384 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1385 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1386 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1387 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1388 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1389 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1390 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1391 .support_trail
= '\x00',
1395 {"fs-uboot", 0x00000, 0x20000},
1396 {"os-image", 0x20000, 0x150000},
1397 {"file-system", 0x170000, 0x240000},
1398 {"partition-table", 0x3b0000, 0x02000},
1399 {"default-mac", 0x3c0000, 0x00020},
1400 {"pin", 0x3c0100, 0x00020},
1401 {"product-info", 0x3c1000, 0x01000},
1402 {"soft-version", 0x3c2000, 0x00100},
1403 {"support-list", 0x3c3000, 0x01000},
1404 {"profile", 0x3c4000, 0x08000},
1405 {"user-config", 0x3d0000, 0x10000},
1406 {"default-config", 0x3e0000, 0x10000},
1407 {"radio", 0x3f0000, 0x10000},
1411 .first_sysupgrade_partition
= "os-image",
1412 .last_sysupgrade_partition
= "file-system"
1415 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1417 .id
= "TL-WPA8630P-V2-EU",
1421 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1422 .support_trail
= '\x00',
1426 {"factory-uboot", 0x00000, 0x20000},
1427 {"fs-uboot", 0x20000, 0x20000},
1428 {"firmware", 0x40000, 0x5e0000},
1429 {"partition-table", 0x620000, 0x02000},
1430 {"default-mac", 0x630000, 0x00020},
1431 {"pin", 0x630100, 0x00020},
1432 {"device-id", 0x630200, 0x00030},
1433 {"product-info", 0x631100, 0x01000},
1434 {"extra-para", 0x632100, 0x01000},
1435 {"soft-version", 0x640000, 0x01000},
1436 {"support-list", 0x641000, 0x01000},
1437 {"profile", 0x642000, 0x08000},
1438 {"user-config", 0x650000, 0x10000},
1439 {"default-config", 0x660000, 0x10000},
1440 {"default-nvm", 0x670000, 0xc0000},
1441 {"default-pib", 0x730000, 0x40000},
1442 {"radio", 0x7f0000, 0x10000},
1446 .first_sysupgrade_partition
= "os-image",
1447 .last_sysupgrade_partition
= "file-system"
1450 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1452 .id
= "TL-WPA8630P-V2-INT",
1456 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1457 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1458 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1459 .support_trail
= '\x00',
1463 {"factory-uboot", 0x00000, 0x20000},
1464 {"fs-uboot", 0x20000, 0x20000},
1465 {"firmware", 0x40000, 0x5e0000},
1466 {"partition-table", 0x620000, 0x02000},
1467 {"extra-para", 0x632100, 0x01000},
1468 {"soft-version", 0x640000, 0x01000},
1469 {"support-list", 0x641000, 0x01000},
1470 {"profile", 0x642000, 0x08000},
1471 {"user-config", 0x650000, 0x10000},
1472 {"default-config", 0x660000, 0x10000},
1473 {"default-nvm", 0x670000, 0xc0000},
1474 {"default-pib", 0x730000, 0x40000},
1475 {"default-mac", 0x7e0000, 0x00020},
1476 {"pin", 0x7e0100, 0x00020},
1477 {"device-id", 0x7e0200, 0x00030},
1478 {"product-info", 0x7e1100, 0x01000},
1479 {"radio", 0x7f0000, 0x10000},
1483 .first_sysupgrade_partition
= "os-image",
1484 .last_sysupgrade_partition
= "file-system"
1487 /** Firmware layout for the TL-WR1043 v5 */
1489 .id
= "TLWR1043NV5",
1493 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1494 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1495 .support_trail
= '\x00',
1496 .soft_ver
= "soft_ver:1.0.0\n",
1498 {"factory-boot", 0x00000, 0x20000},
1499 {"fs-uboot", 0x20000, 0x20000},
1500 {"firmware", 0x40000, 0xec0000},
1501 {"default-mac", 0xf00000, 0x00200},
1502 {"pin", 0xf00200, 0x00200},
1503 {"device-id", 0xf00400, 0x00100},
1504 {"product-info", 0xf00500, 0x0fb00},
1505 {"soft-version", 0xf10000, 0x01000},
1506 {"extra-para", 0xf11000, 0x01000},
1507 {"support-list", 0xf12000, 0x0a000},
1508 {"profile", 0xf1c000, 0x04000},
1509 {"default-config", 0xf20000, 0x10000},
1510 {"user-config", 0xf30000, 0x40000},
1511 {"qos-db", 0xf70000, 0x40000},
1512 {"certificate", 0xfb0000, 0x10000},
1513 {"partition-table", 0xfc0000, 0x10000},
1514 {"log", 0xfd0000, 0x20000},
1515 {"radio", 0xff0000, 0x10000},
1518 .first_sysupgrade_partition
= "os-image",
1519 .last_sysupgrade_partition
= "file-system"
1522 /** Firmware layout for the TL-WR1043 v4 */
1524 .id
= "TLWR1043NDV4",
1528 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1529 .support_trail
= '\x00',
1532 /* We're using a dynamic kernel/rootfs split here */
1534 {"fs-uboot", 0x00000, 0x20000},
1535 {"firmware", 0x20000, 0xf30000},
1536 {"default-mac", 0xf50000, 0x00200},
1537 {"pin", 0xf50200, 0x00200},
1538 {"product-info", 0xf50400, 0x0fc00},
1539 {"soft-version", 0xf60000, 0x0b000},
1540 {"support-list", 0xf6b000, 0x04000},
1541 {"profile", 0xf70000, 0x04000},
1542 {"default-config", 0xf74000, 0x0b000},
1543 {"user-config", 0xf80000, 0x40000},
1544 {"partition-table", 0xfc0000, 0x10000},
1545 {"log", 0xfd0000, 0x20000},
1546 {"radio", 0xff0000, 0x10000},
1550 .first_sysupgrade_partition
= "os-image",
1551 .last_sysupgrade_partition
= "file-system"
1554 /** Firmware layout for the TL-WR902AC v1 */
1556 .id
= "TL-WR902AC-V1",
1560 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1561 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1562 .support_trail
= '\x00',
1566 384KB were moved from file-system to os-image
1567 in comparison to the stock image
1570 {"fs-uboot", 0x00000, 0x20000},
1571 {"firmware", 0x20000, 0x730000},
1572 {"default-mac", 0x750000, 0x00200},
1573 {"pin", 0x750200, 0x00200},
1574 {"product-info", 0x750400, 0x0fc00},
1575 {"soft-version", 0x760000, 0x0b000},
1576 {"support-list", 0x76b000, 0x04000},
1577 {"profile", 0x770000, 0x04000},
1578 {"default-config", 0x774000, 0x0b000},
1579 {"user-config", 0x780000, 0x40000},
1580 {"partition-table", 0x7c0000, 0x10000},
1581 {"log", 0x7d0000, 0x20000},
1582 {"radio", 0x7f0000, 0x10000},
1586 .first_sysupgrade_partition
= "os-image",
1587 .last_sysupgrade_partition
= "file-system",
1590 /** Firmware layout for the TL-WR942N V1 */
1596 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1597 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1598 .support_trail
= '\x00',
1602 {"fs-uboot", 0x00000, 0x20000},
1603 {"firmware", 0x20000, 0xe20000},
1604 {"default-mac", 0xe40000, 0x00200},
1605 {"pin", 0xe40200, 0x00200},
1606 {"product-info", 0xe40400, 0x0fc00},
1607 {"partition-table", 0xe50000, 0x10000},
1608 {"soft-version", 0xe60000, 0x10000},
1609 {"support-list", 0xe70000, 0x10000},
1610 {"profile", 0xe80000, 0x10000},
1611 {"default-config", 0xe90000, 0x10000},
1612 {"user-config", 0xea0000, 0x40000},
1613 {"qos-db", 0xee0000, 0x40000},
1614 {"certificate", 0xf20000, 0x10000},
1615 {"usb-config", 0xfb0000, 0x10000},
1616 {"log", 0xfc0000, 0x20000},
1617 {"radio-bk", 0xfe0000, 0x10000},
1618 {"radio", 0xff0000, 0x10000},
1622 .first_sysupgrade_partition
= "os-image",
1623 .last_sysupgrade_partition
= "file-system",
1626 /** Firmware layout for the RE200 v2 */
1632 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1633 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1634 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1635 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1636 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1637 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1638 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1639 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1640 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1641 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1642 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1643 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1644 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1645 .support_trail
= '\x00',
1649 {"fs-uboot", 0x00000, 0x20000},
1650 {"firmware", 0x20000, 0x7a0000},
1651 {"partition-table", 0x7c0000, 0x02000},
1652 {"default-mac", 0x7c2000, 0x00020},
1653 {"pin", 0x7c2100, 0x00020},
1654 {"product-info", 0x7c3100, 0x01000},
1655 {"soft-version", 0x7c4200, 0x01000},
1656 {"support-list", 0x7c5200, 0x01000},
1657 {"profile", 0x7c6200, 0x08000},
1658 {"config-info", 0x7ce200, 0x00400},
1659 {"user-config", 0x7d0000, 0x10000},
1660 {"default-config", 0x7e0000, 0x10000},
1661 {"radio", 0x7f0000, 0x10000},
1665 .first_sysupgrade_partition
= "os-image",
1666 .last_sysupgrade_partition
= "file-system"
1669 /** Firmware layout for the RE200 v3 */
1675 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1676 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1677 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1678 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1679 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1680 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1681 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1682 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1683 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1684 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1685 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1686 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1687 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1688 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1689 .support_trail
= '\x00',
1693 {"fs-uboot", 0x00000, 0x20000},
1694 {"firmware", 0x20000, 0x7a0000},
1695 {"partition-table", 0x7c0000, 0x02000},
1696 {"default-mac", 0x7c2000, 0x00020},
1697 {"pin", 0x7c2100, 0x00020},
1698 {"product-info", 0x7c3100, 0x01000},
1699 {"soft-version", 0x7c4200, 0x01000},
1700 {"support-list", 0x7c5200, 0x01000},
1701 {"profile", 0x7c6200, 0x08000},
1702 {"config-info", 0x7ce200, 0x00400},
1703 {"user-config", 0x7d0000, 0x10000},
1704 {"default-config", 0x7e0000, 0x10000},
1705 {"radio", 0x7f0000, 0x10000},
1709 .first_sysupgrade_partition
= "os-image",
1710 .last_sysupgrade_partition
= "file-system"
1713 /** Firmware layout for the RE220 v2 */
1719 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1720 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1721 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1722 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1723 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1724 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1725 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1726 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1727 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1728 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1729 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1730 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1731 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1732 .support_trail
= '\x00',
1736 {"fs-uboot", 0x00000, 0x20000},
1737 {"firmware", 0x20000, 0x7a0000},
1738 {"partition-table", 0x7c0000, 0x02000},
1739 {"default-mac", 0x7c2000, 0x00020},
1740 {"pin", 0x7c2100, 0x00020},
1741 {"product-info", 0x7c3100, 0x01000},
1742 {"soft-version", 0x7c4200, 0x01000},
1743 {"support-list", 0x7c5200, 0x01000},
1744 {"profile", 0x7c6200, 0x08000},
1745 {"config-info", 0x7ce200, 0x00400},
1746 {"user-config", 0x7d0000, 0x10000},
1747 {"default-config", 0x7e0000, 0x10000},
1748 {"radio", 0x7f0000, 0x10000},
1752 .first_sysupgrade_partition
= "os-image",
1753 .last_sysupgrade_partition
= "file-system"
1756 /** Firmware layout for the RE305 v1 */
1762 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1763 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1764 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1765 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1766 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1767 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1768 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1769 .support_trail
= '\x00',
1773 {"fs-uboot", 0x00000, 0x20000},
1774 {"firmware", 0x20000, 0x5e0000},
1775 {"partition-table", 0x600000, 0x02000},
1776 {"default-mac", 0x610000, 0x00020},
1777 {"pin", 0x610100, 0x00020},
1778 {"product-info", 0x611100, 0x01000},
1779 {"soft-version", 0x620000, 0x01000},
1780 {"support-list", 0x621000, 0x01000},
1781 {"profile", 0x622000, 0x08000},
1782 {"user-config", 0x630000, 0x10000},
1783 {"default-config", 0x640000, 0x10000},
1784 {"radio", 0x7f0000, 0x10000},
1788 .first_sysupgrade_partition
= "os-image",
1789 .last_sysupgrade_partition
= "file-system"
1792 /** Firmware layout for the RE350 v1 */
1798 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1799 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1800 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1801 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1802 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1803 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1804 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1805 .support_trail
= '\x00',
1808 /** We're using a dynamic kernel/rootfs split here */
1810 {"fs-uboot", 0x00000, 0x20000},
1811 {"firmware", 0x20000, 0x5e0000},
1812 {"partition-table", 0x600000, 0x02000},
1813 {"default-mac", 0x610000, 0x00020},
1814 {"pin", 0x610100, 0x00020},
1815 {"product-info", 0x611100, 0x01000},
1816 {"soft-version", 0x620000, 0x01000},
1817 {"support-list", 0x621000, 0x01000},
1818 {"profile", 0x622000, 0x08000},
1819 {"user-config", 0x630000, 0x10000},
1820 {"default-config", 0x640000, 0x10000},
1821 {"radio", 0x7f0000, 0x10000},
1825 .first_sysupgrade_partition
= "os-image",
1826 .last_sysupgrade_partition
= "file-system"
1829 /** Firmware layout for the RE350K v1 */
1835 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1836 .support_trail
= '\x00',
1839 /** We're using a dynamic kernel/rootfs split here */
1841 {"fs-uboot", 0x00000, 0x20000},
1842 {"firmware", 0x20000, 0xd70000},
1843 {"partition-table", 0xd90000, 0x02000},
1844 {"default-mac", 0xda0000, 0x00020},
1845 {"pin", 0xda0100, 0x00020},
1846 {"product-info", 0xda1100, 0x01000},
1847 {"soft-version", 0xdb0000, 0x01000},
1848 {"support-list", 0xdb1000, 0x01000},
1849 {"profile", 0xdb2000, 0x08000},
1850 {"user-config", 0xdc0000, 0x10000},
1851 {"default-config", 0xdd0000, 0x10000},
1852 {"device-id", 0xde0000, 0x00108},
1853 {"radio", 0xff0000, 0x10000},
1857 .first_sysupgrade_partition
= "os-image",
1858 .last_sysupgrade_partition
= "file-system"
1861 /** Firmware layout for the RE355 */
1867 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1868 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1869 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1870 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1871 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1872 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1873 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1874 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1875 .support_trail
= '\x00',
1878 /* We're using a dynamic kernel/rootfs split here */
1880 {"fs-uboot", 0x00000, 0x20000},
1881 {"firmware", 0x20000, 0x5e0000},
1882 {"partition-table", 0x600000, 0x02000},
1883 {"default-mac", 0x610000, 0x00020},
1884 {"pin", 0x610100, 0x00020},
1885 {"product-info", 0x611100, 0x01000},
1886 {"soft-version", 0x620000, 0x01000},
1887 {"support-list", 0x621000, 0x01000},
1888 {"profile", 0x622000, 0x08000},
1889 {"user-config", 0x630000, 0x10000},
1890 {"default-config", 0x640000, 0x10000},
1891 {"radio", 0x7f0000, 0x10000},
1895 .first_sysupgrade_partition
= "os-image",
1896 .last_sysupgrade_partition
= "file-system"
1899 /** Firmware layout for the RE450 */
1905 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1906 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1907 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1908 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1909 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1910 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1911 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1912 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1913 .support_trail
= '\x00',
1916 /** We're using a dynamic kernel/rootfs split here */
1918 {"fs-uboot", 0x00000, 0x20000},
1919 {"firmware", 0x20000, 0x5e0000},
1920 {"partition-table", 0x600000, 0x02000},
1921 {"default-mac", 0x610000, 0x00020},
1922 {"pin", 0x610100, 0x00020},
1923 {"product-info", 0x611100, 0x01000},
1924 {"soft-version", 0x620000, 0x01000},
1925 {"support-list", 0x621000, 0x01000},
1926 {"profile", 0x622000, 0x08000},
1927 {"user-config", 0x630000, 0x10000},
1928 {"default-config", 0x640000, 0x10000},
1929 {"radio", 0x7f0000, 0x10000},
1933 .first_sysupgrade_partition
= "os-image",
1934 .last_sysupgrade_partition
= "file-system"
1937 /** Firmware layout for the RE450 v2 */
1943 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1944 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1945 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1946 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1947 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1948 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1949 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1950 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1951 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1952 .support_trail
= '\x00',
1955 /* We're using a dynamic kernel/rootfs split here */
1957 {"fs-uboot", 0x00000, 0x20000},
1958 {"firmware", 0x20000, 0x5e0000},
1959 {"partition-table", 0x600000, 0x02000},
1960 {"default-mac", 0x610000, 0x00020},
1961 {"pin", 0x610100, 0x00020},
1962 {"product-info", 0x611100, 0x01000},
1963 {"soft-version", 0x620000, 0x01000},
1964 {"support-list", 0x621000, 0x01000},
1965 {"profile", 0x622000, 0x08000},
1966 {"user-config", 0x630000, 0x10000},
1967 {"default-config", 0x640000, 0x10000},
1968 {"radio", 0x7f0000, 0x10000},
1972 .first_sysupgrade_partition
= "os-image",
1973 .last_sysupgrade_partition
= "file-system"
1976 /** Firmware layout for the RE450 v3 */
1982 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1983 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1984 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1985 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1986 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1987 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1988 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1989 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1990 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1991 .support_trail
= '\x00',
1994 /* We're using a dynamic kernel/rootfs split here */
1996 {"fs-uboot", 0x00000, 0x20000},
1997 {"default-mac", 0x20000, 0x00020},
1998 {"pin", 0x20020, 0x00020},
1999 {"product-info", 0x21000, 0x01000},
2000 {"partition-table", 0x22000, 0x02000},
2001 {"soft-version", 0x24000, 0x01000},
2002 {"support-list", 0x25000, 0x01000},
2003 {"profile", 0x26000, 0x08000},
2004 {"user-config", 0x2e000, 0x10000},
2005 {"default-config", 0x3e000, 0x10000},
2006 {"config-info", 0x4e000, 0x00400},
2007 {"firmware", 0x50000, 0x7a0000},
2008 {"radio", 0x7f0000, 0x10000},
2012 .first_sysupgrade_partition
= "os-image",
2013 .last_sysupgrade_partition
= "file-system"
2016 /** Firmware layout for the RE500 */
2022 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2023 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2024 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2025 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2026 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2027 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2028 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2029 .support_trail
= '\x00',
2032 /* We're using a dynamic kernel/rootfs split here */
2034 {"fs-uboot", 0x00000, 0x20000},
2035 {"firmware", 0x20000, 0xde0000},
2036 {"partition-table", 0xe00000, 0x02000},
2037 {"default-mac", 0xe10000, 0x00020},
2038 {"pin", 0xe10100, 0x00020},
2039 {"product-info", 0xe11100, 0x01000},
2040 {"soft-version", 0xe20000, 0x01000},
2041 {"support-list", 0xe21000, 0x01000},
2042 {"profile", 0xe22000, 0x08000},
2043 {"user-config", 0xe30000, 0x10000},
2044 {"default-config", 0xe40000, 0x10000},
2045 {"radio", 0xff0000, 0x10000},
2049 .first_sysupgrade_partition
= "os-image",
2050 .last_sysupgrade_partition
= "file-system"
2053 /** Firmware layout for the RE650 */
2059 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2060 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2061 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2062 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2063 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2064 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2065 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2066 .support_trail
= '\x00',
2069 /* We're using a dynamic kernel/rootfs split here */
2071 {"fs-uboot", 0x00000, 0x20000},
2072 {"firmware", 0x20000, 0xde0000},
2073 {"partition-table", 0xe00000, 0x02000},
2074 {"default-mac", 0xe10000, 0x00020},
2075 {"pin", 0xe10100, 0x00020},
2076 {"product-info", 0xe11100, 0x01000},
2077 {"soft-version", 0xe20000, 0x01000},
2078 {"support-list", 0xe21000, 0x01000},
2079 {"profile", 0xe22000, 0x08000},
2080 {"user-config", 0xe30000, 0x10000},
2081 {"default-config", 0xe40000, 0x10000},
2082 {"radio", 0xff0000, 0x10000},
2086 .first_sysupgrade_partition
= "os-image",
2087 .last_sysupgrade_partition
= "file-system"
2093 #define error(_ret, _errno, _str, ...) \
2095 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2096 strerror(_errno)); \
2102 /** Stores a uint32 as big endian */
2103 static inline void put32(uint8_t *buf
, uint32_t val
) {
2110 /** Allocates a new image partition */
2111 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2112 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2114 error(1, errno
, "malloc");
2119 /** Frees an image partition */
2120 static void free_image_partition(struct image_partition_entry entry
) {
2124 static time_t source_date_epoch
= -1;
2125 static void set_source_date_epoch() {
2126 char *env
= getenv("SOURCE_DATE_EPOCH");
2130 source_date_epoch
= strtoull(env
, &endptr
, 10);
2131 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2132 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2138 /** Generates the partition-table partition */
2139 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2140 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2142 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2150 for (i
= 0; p
[i
].name
; i
++) {
2152 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2155 error(1, 0, "flash partition table overflow?");
2162 memset(s
, 0xff, end
-s
);
2168 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2169 static inline uint8_t bcd(uint8_t v
) {
2170 return 0x10 * (v
/10) + v
%10;
2174 /** Generates the soft-version partition */
2175 static struct image_partition_entry
make_soft_version(struct device_info
*info
, uint32_t rev
) {
2176 size_t part_len
= sizeof(struct soft_version
);
2177 if (info
->soft_ver_compat_level
> 0)
2178 part_len
+= sizeof(uint32_t);
2180 struct image_partition_entry entry
=
2181 alloc_image_partition("soft-version", part_len
+1);
2182 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2186 if (source_date_epoch
!= -1)
2187 t
= source_date_epoch
;
2188 else if (time(&t
) == (time_t)(-1))
2189 error(1, errno
, "time");
2191 struct tm
*tm
= gmtime(&t
);
2193 /* Partition contents size, minus 8 byte header and trailing byte */
2194 s
->data_len
= htonl(entry
.size
-9);
2198 s
->version_major
= 0;
2199 s
->version_minor
= 0;
2200 s
->version_patch
= 0;
2202 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2203 s
->year_lo
= bcd(tm
->tm_year
%100);
2204 s
->month
= bcd(tm
->tm_mon
+1);
2205 s
->day
= bcd(tm
->tm_mday
);
2206 s
->rev
= htonl(rev
);
2208 if (info
->soft_ver_compat_level
> 0)
2209 *(uint32_t *)(entry
.data
+ sizeof(struct soft_version
)) =
2210 htonl(info
->soft_ver_compat_level
);
2212 entry
.data
[entry
.size
-1] = 0xff;
2217 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2218 /** String length _including_ the terminating zero byte */
2219 uint32_t ver_len
= strlen(soft_ver
) + 1;
2220 /** Partition contains 64 bit header, the version string, and one additional null byte */
2221 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2222 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2224 uint32_t *len
= (uint32_t *)entry
.data
;
2225 len
[0] = htonl(ver_len
);
2227 memcpy(&len
[2], soft_ver
, ver_len
);
2229 entry
.data
[partition_len
- 1] = 0;
2234 /** Generates the support-list partition */
2235 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2236 size_t len
= strlen(info
->support_list
);
2237 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2239 put32(entry
.data
, len
);
2240 memset(entry
.data
+4, 0, 4);
2241 memcpy(entry
.data
+8, info
->support_list
, len
);
2242 entry
.data
[len
+8] = info
->support_trail
;
2247 /** Creates a new image partition with an arbitrary name from a file */
2248 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2249 struct stat statbuf
;
2251 if (stat(filename
, &statbuf
) < 0)
2252 error(1, errno
, "unable to stat file `%s'", filename
);
2254 size_t len
= statbuf
.st_size
;
2256 if (add_jffs2_eof
) {
2257 if (file_system_partition
)
2258 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2260 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2263 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2265 FILE *file
= fopen(filename
, "rb");
2267 error(1, errno
, "unable to open file `%s'", filename
);
2269 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2270 error(1, errno
, "unable to read file `%s'", filename
);
2272 if (add_jffs2_eof
) {
2273 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2275 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2276 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2284 /** Creates a new image partition from arbitrary data */
2285 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2287 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2289 memcpy(entry
.data
, datain
, len
);
2295 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2297 Example image partition table:
2299 fwup-ptn partition-table base 0x00800 size 0x00800
2300 fwup-ptn os-image base 0x01000 size 0x113b45
2301 fwup-ptn file-system base 0x114b45 size 0x1d0004
2302 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2304 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2305 the end of the partition table is marked with a zero byte.
2307 The firmware image must contain at least the partition-table and support-list partitions
2308 to be accepted. There aren't any alignment constraints for the image partitions.
2310 The partition-table partition contains the actual flash layout; partitions
2311 from the image partition table are mapped to the corresponding flash partitions during
2312 the firmware upgrade. The support-list partition contains a list of devices supported by
2315 The base offsets in the firmware partition table are relative to the end
2316 of the vendor information block, so the partition-table partition will
2317 actually start at offset 0x1814 of the image.
2319 I think partition-table must be the first partition in the firmware image.
2321 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2323 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2325 size_t base
= 0x800;
2326 for (i
= 0; parts
[i
].name
; i
++) {
2327 for (j
= 0; flash_parts
[j
].name
; j
++) {
2328 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2329 if (parts
[i
].size
> flash_parts
[j
].size
)
2330 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2335 assert(flash_parts
[j
].name
);
2337 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2339 size_t len
= end
-image_pt
;
2340 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2343 error(1, 0, "image partition table overflow?");
2347 base
+= parts
[i
].size
;
2351 /** Generates and writes the image MD5 checksum */
2352 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2356 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2357 MD5_Update(&ctx
, buffer
, len
);
2358 MD5_Final(md5
, &ctx
);
2363 Generates the firmware image in factory format
2369 0000-0003 Image size (4 bytes, big endian)
2370 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2371 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2372 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2373 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2374 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2375 1814-xxxx Firmware partitions
2377 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2381 for (i
= 0; parts
[i
].name
; i
++)
2382 *len
+= parts
[i
].size
;
2384 uint8_t *image
= malloc(*len
);
2386 error(1, errno
, "malloc");
2388 memset(image
, 0xff, *len
);
2392 size_t vendor_len
= strlen(info
->vendor
);
2393 put32(image
+0x14, vendor_len
);
2394 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2397 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2398 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2404 Generates the firmware image in sysupgrade format
2406 This makes some assumptions about the provided flash and image partition tables and
2407 should be generalized when TP-LINK starts building its safeloader into hardware with
2408 different flash layouts.
2410 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2412 size_t flash_first_partition_index
= 0;
2413 size_t flash_last_partition_index
= 0;
2414 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2415 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2416 const struct image_partition_entry
*image_last_partition
= NULL
;
2418 /** Find first and last partitions */
2419 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2420 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2421 flash_first_partition
= &info
->partitions
[i
];
2422 flash_first_partition_index
= i
;
2423 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2424 flash_last_partition
= &info
->partitions
[i
];
2425 flash_last_partition_index
= i
;
2429 assert(flash_first_partition
&& flash_last_partition
);
2430 assert(flash_first_partition_index
< flash_last_partition_index
);
2432 /** Find last partition from image to calculate needed size */
2433 for (i
= 0; image_parts
[i
].name
; i
++) {
2434 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2435 image_last_partition
= &image_parts
[i
];
2440 assert(image_last_partition
);
2442 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2444 uint8_t *image
= malloc(*len
);
2446 error(1, errno
, "malloc");
2448 memset(image
, 0xff, *len
);
2450 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2451 for (j
= 0; image_parts
[j
].name
; j
++) {
2452 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2453 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2454 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2455 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2459 assert(image_parts
[j
].name
);
2466 /** Generates an image according to a given layout and writes it to a file */
2467 static void build_image(const char *output
,
2468 const char *kernel_image
,
2469 const char *rootfs_image
,
2473 struct device_info
*info
) {
2477 struct image_partition_entry parts
[7] = {};
2479 struct flash_partition_entry
*firmware_partition
= NULL
;
2480 struct flash_partition_entry
*os_image_partition
= NULL
;
2481 struct flash_partition_entry
*file_system_partition
= NULL
;
2482 size_t firmware_partition_index
= 0;
2484 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2485 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2487 firmware_partition
= &info
->partitions
[i
];
2488 firmware_partition_index
= i
;
2492 if (firmware_partition
)
2494 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2495 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2498 if (stat(kernel_image
, &kernel
) < 0)
2499 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2501 if (kernel
.st_size
> firmware_partition
->size
)
2502 error(1, 0, "kernel overflowed firmware partition\n");
2504 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2505 info
->partitions
[i
+1] = info
->partitions
[i
];
2507 file_system_partition
->name
= "file-system";
2508 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2510 /* Align partition start to erase blocks for factory images only */
2512 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2514 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2516 os_image_partition
->name
= "os-image";
2517 os_image_partition
->size
= kernel
.st_size
;
2520 parts
[0] = make_partition_table(info
->partitions
);
2522 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2524 parts
[1] = make_soft_version(info
, rev
);
2526 parts
[2] = make_support_list(info
);
2527 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2528 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2530 /* Some devices need the extra-para partition to accept the firmware */
2531 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2532 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2533 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2534 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2535 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2536 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2537 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2538 parts
[5] = put_data("extra-para", mdat
, 11);
2539 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2540 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2541 parts
[5] = put_data("extra-para", mdat
, 11);
2542 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2543 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2544 parts
[5] = put_data("extra-para", mdat
, 11);
2545 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2546 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2547 parts
[5] = put_data("extra-para", mdat
, 11);
2548 } else if (strcasecmp(info
->id
, "EAP245-V3") == 0) {
2549 const char mdat
[10] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01};
2550 parts
[5] = put_data("extra-para", mdat
, 10);
2556 image
= generate_sysupgrade_image(info
, parts
, &len
);
2558 image
= generate_factory_image(info
, parts
, &len
);
2560 FILE *file
= fopen(output
, "wb");
2562 error(1, errno
, "unable to open output file");
2564 if (fwrite(image
, len
, 1, file
) != 1)
2565 error(1, 0, "unable to write output file");
2571 for (i
= 0; parts
[i
].name
; i
++)
2572 free_image_partition(parts
[i
]);
2576 static void usage(const char *argv0
) {
2578 "Usage: %s [OPTIONS...]\n"
2581 " -h show this help\n"
2583 "Create a new image:\n"
2584 " -B <board> create image for the board specified with <board>\n"
2585 " -k <file> read kernel image from the file <file>\n"
2586 " -r <file> read rootfs image from the file <file>\n"
2587 " -o <file> write output to the file <file>\n"
2588 " -V <rev> sets the revision number to <rev>\n"
2589 " -j add jffs2 end-of-filesystem markers\n"
2590 " -S create sysupgrade instead of factory image\n"
2591 "Extract an old image:\n"
2592 " -x <file> extract all oem firmware partition\n"
2593 " -d <dir> destination to extract the firmware partition\n"
2594 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2600 static struct device_info
*find_board(const char *id
)
2602 struct device_info
*board
= NULL
;
2604 for (board
= boards
; board
->id
!= NULL
; board
++)
2605 if (strcasecmp(id
, board
->id
) == 0)
2611 static int add_flash_partition(
2612 struct flash_partition_entry
*part_list
,
2619 /* check if the list has a free entry */
2620 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2621 if (part_list
->name
== NULL
&&
2622 part_list
->base
== 0 &&
2623 part_list
->size
== 0)
2627 if (ptr
== max_entries
) {
2628 error(1, 0, "No free flash part entry available.");
2631 part_list
->name
= calloc(1, strlen(name
) + 1);
2632 if (!part_list
->name
) {
2633 error(1, 0, "Unable to allocate memory");
2636 memcpy((char *)part_list
->name
, name
, strlen(name
));
2637 part_list
->base
= base
;
2638 part_list
->size
= size
;
2643 /** read the partition table into struct flash_partition_entry */
2644 static int read_partition_table(
2645 FILE *file
, long offset
,
2646 struct flash_partition_entry
*entries
, size_t max_entries
,
2651 const char *parthdr
= NULL
;
2652 const char *fwuphdr
= "fwup-ptn";
2653 const char *flashhdr
= "partition";
2655 /* TODO: search for the partition table */
2665 error(1, 0, "Invalid partition table");
2668 if (fseek(file
, offset
, SEEK_SET
) < 0)
2669 error(1, errno
, "Can not seek in the firmware");
2671 if (fread(buf
, 2048, 1, file
) != 1)
2672 error(1, errno
, "Can not read fwup-ptn from the firmware");
2676 /* look for the partition header */
2677 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2678 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2683 end
= buf
+ sizeof(buf
);
2684 while ((ptr
+ strlen(parthdr
)) < end
&&
2685 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2689 char name
[32] = { 0 };
2691 unsigned long base
= 0;
2692 unsigned long size
= 0;
2694 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2695 if (end_part
== NULL
) {
2696 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2700 for (int i
= 0; i
<= 4; i
++) {
2701 if (end_part
<= ptr
)
2704 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2705 if (end_element
== NULL
) {
2706 error(1, errno
, "Ignoring the rest of the partition entries.");
2711 /* partition header */
2713 ptr
= end_element
+ 1;
2717 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2718 strncpy(name
, ptr
, name_len
);
2719 name
[name_len
] = '\0';
2720 ptr
= end_element
+ 1;
2725 ptr
= end_element
+ 1;
2730 base
= strtoul(ptr
, NULL
, 16);
2731 ptr
= end_element
+ 1;
2736 ptr
= end_element
+ 1;
2737 /* actual size. The last element doesn't have a sepeartor */
2738 size
= strtoul(ptr
, NULL
, 16);
2739 /* the part ends with 0x09, 0x0d, 0x0a */
2741 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2750 static void write_partition(
2752 size_t firmware_offset
,
2753 struct flash_partition_entry
*entry
,
2759 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2761 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2762 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2763 error(1, errno
, "Can not read partition from input_file");
2765 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2766 error(1, errno
, "Can not write partition to output_file");
2768 /* write last chunk smaller than buffer */
2769 if (offset
< entry
->size
) {
2770 offset
= entry
->size
- offset
;
2771 if (fread(buf
, offset
, 1, input_file
) != 1)
2772 error(1, errno
, "Can not read partition from input_file");
2773 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2774 error(1, errno
, "Can not write partition to output_file");
2778 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2781 char output
[PATH_MAX
];
2783 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2784 output_file
= fopen(output
, "wb+");
2785 if (output_file
== NULL
) {
2786 error(1, errno
, "Can not open output file %s", output
);
2789 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2791 fclose(output_file
);
2796 /** extract all partitions from the firmware file */
2797 static int extract_firmware(const char *input
, const char *output_directory
)
2799 struct flash_partition_entry entries
[16] = { 0 };
2800 size_t max_entries
= 16;
2801 size_t firmware_offset
= 0x1014;
2804 struct stat statbuf
;
2806 /* check input file */
2807 if (stat(input
, &statbuf
)) {
2808 error(1, errno
, "Can not read input firmware %s", input
);
2811 /* check if output directory exists */
2812 if (stat(output_directory
, &statbuf
)) {
2813 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2816 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2817 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2820 input_file
= fopen(input
, "rb");
2822 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2823 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2826 for (size_t i
= 0; i
< max_entries
; i
++) {
2827 if (entries
[i
].name
== NULL
&&
2828 entries
[i
].base
== 0 &&
2829 entries
[i
].size
== 0)
2832 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2838 static struct flash_partition_entry
*find_partition(
2839 struct flash_partition_entry
*entries
, size_t max_entries
,
2840 const char *name
, const char *error_msg
)
2842 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2843 if (strcmp(entries
->name
, name
) == 0)
2847 error(1, 0, "%s", error_msg
);
2851 static void write_ff(FILE *output_file
, size_t size
)
2856 memset(buf
, 0xff, sizeof(buf
));
2858 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2859 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2860 error(1, errno
, "Can not write 0xff to output_file");
2863 /* write last chunk smaller than buffer */
2864 if (offset
< size
) {
2865 offset
= size
- offset
;
2866 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2867 error(1, errno
, "Can not write partition to output_file");
2871 static void convert_firmware(const char *input
, const char *output
)
2873 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2874 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2875 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2876 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2877 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2878 size_t firmware_offset
= 0x1014;
2879 FILE *input_file
, *output_file
;
2881 struct stat statbuf
;
2883 /* check input file */
2884 if (stat(input
, &statbuf
)) {
2885 error(1, errno
, "Can not read input firmware %s", input
);
2888 input_file
= fopen(input
, "rb");
2890 error(1, 0, "Can not open input firmware %s", input
);
2892 output_file
= fopen(output
, "wb");
2894 error(1, 0, "Can not open output firmware %s", output
);
2896 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2897 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2900 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2901 "os-image", "Error can not find os-image partition (fwup)");
2902 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2903 "file-system", "Error can not find file-system partition (fwup)");
2904 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2905 "partition-table", "Error can not find partition-table partition");
2907 /* the flash partition table has a 0x00000004 magic haeder */
2908 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2909 error(1, 0, "Error can not read the partition table (flash)");
2911 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2912 "os-image", "Error can not find os-image partition (flash)");
2913 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2914 "file-system", "Error can not find file-system partition (flash)");
2916 /* write os_image to 0x0 */
2917 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2918 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2920 /* write file-system behind os_image */
2921 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2922 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2923 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2925 fclose(output_file
);
2929 int main(int argc
, char *argv
[]) {
2930 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2931 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2932 bool add_jffs2_eof
= false, sysupgrade
= false;
2934 struct device_info
*info
;
2935 set_source_date_epoch();
2940 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2950 kernel_image
= optarg
;
2954 rootfs_image
= optarg
;
2962 sscanf(optarg
, "r%u", &rev
);
2966 add_jffs2_eof
= true;
2978 output_directory
= optarg
;
2982 extract_image
= optarg
;
2986 convert_image
= optarg
;
2995 if (extract_image
|| output_directory
) {
2997 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2998 if (!output_directory
)
2999 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3000 extract_firmware(extract_image
, output_directory
);
3001 } else if (convert_image
) {
3003 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3004 convert_firmware(convert_image
, output
);
3007 error(1, 0, "no board has been specified");
3009 error(1, 0, "no kernel image has been specified");
3011 error(1, 0, "no rootfs image has been specified");
3013 error(1, 0, "no output filename has been specified");
3015 info
= find_board(board
);
3018 error(1, 0, "unsupported board %s", board
);
3020 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);