2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 uint32_t soft_ver_compat_level
;
81 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
82 const char *first_sysupgrade_partition
;
83 const char *last_sysupgrade_partition
;
86 /** The content of the soft-version structure */
87 struct __attribute__((__packed__
)) soft_version
{
91 uint8_t version_major
;
92 uint8_t version_minor
;
93 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the EAP225-Wall v2 */
1303 .id
= "EAP225-WALL-V2",
1306 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1307 .support_trail
= '\xff',
1309 .soft_ver_compat_level
= 1,
1312 {"fs-uboot", 0x00000, 0x20000},
1313 {"partition-table", 0x20000, 0x02000},
1314 {"default-mac", 0x30000, 0x01000},
1315 {"support-list", 0x31000, 0x00100},
1316 {"product-info", 0x31100, 0x00400},
1317 {"soft-version", 0x32000, 0x00100},
1318 {"firmware", 0x40000, 0xd80000},
1319 {"user-config", 0xdc0000, 0x30000},
1320 {"mutil-log", 0xf30000, 0x80000},
1321 {"oops", 0xfb0000, 0x40000},
1322 {"radio", 0xff0000, 0x10000},
1326 .first_sysupgrade_partition
= "os-image",
1327 .last_sysupgrade_partition
= "file-system"
1330 /** Firmware layout for the EAP245 v3 */
1335 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1336 .support_trail
= '\xff',
1338 .soft_ver_compat_level
= 1,
1340 /** Firmware partition with dynamic kernel/rootfs split */
1342 {"factroy-boot", 0x00000, 0x40000},
1343 {"fs-uboot", 0x40000, 0x40000},
1344 {"partition-table", 0x80000, 0x10000},
1345 {"default-mac", 0x90000, 0x01000},
1346 {"support-list", 0x91000, 0x00100},
1347 {"product-info", 0x91100, 0x00400},
1348 {"soft-version", 0x92000, 0x00100},
1349 {"radio", 0xa0000, 0x10000},
1350 {"extra-para", 0xb0000, 0x10000},
1351 {"firmware", 0xc0000, 0xe40000},
1352 {"config", 0xf00000, 0x30000},
1353 {"mutil-log", 0xf30000, 0x80000},
1354 {"oops", 0xfb0000, 0x40000},
1358 .first_sysupgrade_partition
= "os-image",
1359 .last_sysupgrade_partition
= "file-system"
1362 /** Firmware layout for the TL-WA850RE v2 */
1364 .id
= "TLWA850REV2",
1368 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1369 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1370 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1371 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1372 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1373 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1374 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1375 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1376 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1377 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1378 .support_trail
= '\x00',
1382 576KB were moved from file-system to os-image
1383 in comparison to the stock image
1386 {"fs-uboot", 0x00000, 0x20000},
1387 {"firmware", 0x20000, 0x390000},
1388 {"partition-table", 0x3b0000, 0x02000},
1389 {"default-mac", 0x3c0000, 0x00020},
1390 {"pin", 0x3c0100, 0x00020},
1391 {"product-info", 0x3c1000, 0x01000},
1392 {"soft-version", 0x3c2000, 0x00100},
1393 {"support-list", 0x3c3000, 0x01000},
1394 {"profile", 0x3c4000, 0x08000},
1395 {"user-config", 0x3d0000, 0x10000},
1396 {"default-config", 0x3e0000, 0x10000},
1397 {"radio", 0x3f0000, 0x10000},
1401 .first_sysupgrade_partition
= "os-image",
1402 .last_sysupgrade_partition
= "file-system"
1405 /** Firmware layout for the TL-WA855RE v1 */
1407 .id
= "TLWA855REV1",
1411 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1412 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1413 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1414 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1415 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1416 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1417 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1418 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1419 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1420 .support_trail
= '\x00',
1424 {"fs-uboot", 0x00000, 0x20000},
1425 {"os-image", 0x20000, 0x150000},
1426 {"file-system", 0x170000, 0x240000},
1427 {"partition-table", 0x3b0000, 0x02000},
1428 {"default-mac", 0x3c0000, 0x00020},
1429 {"pin", 0x3c0100, 0x00020},
1430 {"product-info", 0x3c1000, 0x01000},
1431 {"soft-version", 0x3c2000, 0x00100},
1432 {"support-list", 0x3c3000, 0x01000},
1433 {"profile", 0x3c4000, 0x08000},
1434 {"user-config", 0x3d0000, 0x10000},
1435 {"default-config", 0x3e0000, 0x10000},
1436 {"radio", 0x3f0000, 0x10000},
1440 .first_sysupgrade_partition
= "os-image",
1441 .last_sysupgrade_partition
= "file-system"
1444 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1446 .id
= "TL-WPA8630P-V2-EU",
1450 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1451 .support_trail
= '\x00',
1455 {"factory-uboot", 0x00000, 0x20000},
1456 {"fs-uboot", 0x20000, 0x20000},
1457 {"firmware", 0x40000, 0x5e0000},
1458 {"partition-table", 0x620000, 0x02000},
1459 {"default-mac", 0x630000, 0x00020},
1460 {"pin", 0x630100, 0x00020},
1461 {"device-id", 0x630200, 0x00030},
1462 {"product-info", 0x631100, 0x01000},
1463 {"extra-para", 0x632100, 0x01000},
1464 {"soft-version", 0x640000, 0x01000},
1465 {"support-list", 0x641000, 0x01000},
1466 {"profile", 0x642000, 0x08000},
1467 {"user-config", 0x650000, 0x10000},
1468 {"default-config", 0x660000, 0x10000},
1469 {"default-nvm", 0x670000, 0xc0000},
1470 {"default-pib", 0x730000, 0x40000},
1471 {"radio", 0x7f0000, 0x10000},
1475 .first_sysupgrade_partition
= "os-image",
1476 .last_sysupgrade_partition
= "file-system"
1479 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1481 .id
= "TL-WPA8630P-V2-INT",
1485 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1486 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1487 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1488 .support_trail
= '\x00',
1492 {"factory-uboot", 0x00000, 0x20000},
1493 {"fs-uboot", 0x20000, 0x20000},
1494 {"firmware", 0x40000, 0x5e0000},
1495 {"partition-table", 0x620000, 0x02000},
1496 {"extra-para", 0x632100, 0x01000},
1497 {"soft-version", 0x640000, 0x01000},
1498 {"support-list", 0x641000, 0x01000},
1499 {"profile", 0x642000, 0x08000},
1500 {"user-config", 0x650000, 0x10000},
1501 {"default-config", 0x660000, 0x10000},
1502 {"default-nvm", 0x670000, 0xc0000},
1503 {"default-pib", 0x730000, 0x40000},
1504 {"default-mac", 0x7e0000, 0x00020},
1505 {"pin", 0x7e0100, 0x00020},
1506 {"device-id", 0x7e0200, 0x00030},
1507 {"product-info", 0x7e1100, 0x01000},
1508 {"radio", 0x7f0000, 0x10000},
1512 .first_sysupgrade_partition
= "os-image",
1513 .last_sysupgrade_partition
= "file-system"
1516 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1518 .id
= "TL-WPA8630P-V2.1-EU",
1522 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1523 .support_trail
= '\x00',
1527 {"factory-uboot", 0x00000, 0x20000},
1528 {"fs-uboot", 0x20000, 0x20000},
1529 {"firmware", 0x40000, 0x5e0000},
1530 {"extra-para", 0x680000, 0x01000},
1531 {"product-info", 0x690000, 0x01000},
1532 {"partition-table", 0x6a0000, 0x02000},
1533 {"soft-version", 0x6b0000, 0x01000},
1534 {"support-list", 0x6b1000, 0x01000},
1535 {"profile", 0x6b2000, 0x08000},
1536 {"user-config", 0x6c0000, 0x10000},
1537 {"default-config", 0x6d0000, 0x10000},
1538 {"default-nvm", 0x6e0000, 0xc0000},
1539 {"default-pib", 0x7a0000, 0x40000},
1540 {"default-mac", 0x7e0000, 0x00020},
1541 {"pin", 0x7e0100, 0x00020},
1542 {"device-id", 0x7e0200, 0x00030},
1543 {"radio", 0x7f0000, 0x10000},
1547 .first_sysupgrade_partition
= "os-image",
1548 .last_sysupgrade_partition
= "file-system"
1551 /** Firmware layout for the TL-WR1043 v5 */
1553 .id
= "TLWR1043NV5",
1557 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1558 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1559 .support_trail
= '\x00',
1560 .soft_ver
= "soft_ver:1.0.0\n",
1562 {"factory-boot", 0x00000, 0x20000},
1563 {"fs-uboot", 0x20000, 0x20000},
1564 {"firmware", 0x40000, 0xec0000},
1565 {"default-mac", 0xf00000, 0x00200},
1566 {"pin", 0xf00200, 0x00200},
1567 {"device-id", 0xf00400, 0x00100},
1568 {"product-info", 0xf00500, 0x0fb00},
1569 {"soft-version", 0xf10000, 0x01000},
1570 {"extra-para", 0xf11000, 0x01000},
1571 {"support-list", 0xf12000, 0x0a000},
1572 {"profile", 0xf1c000, 0x04000},
1573 {"default-config", 0xf20000, 0x10000},
1574 {"user-config", 0xf30000, 0x40000},
1575 {"qos-db", 0xf70000, 0x40000},
1576 {"certificate", 0xfb0000, 0x10000},
1577 {"partition-table", 0xfc0000, 0x10000},
1578 {"log", 0xfd0000, 0x20000},
1579 {"radio", 0xff0000, 0x10000},
1582 .first_sysupgrade_partition
= "os-image",
1583 .last_sysupgrade_partition
= "file-system"
1586 /** Firmware layout for the TL-WR1043 v4 */
1588 .id
= "TLWR1043NDV4",
1592 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1593 .support_trail
= '\x00',
1596 /* We're using a dynamic kernel/rootfs split here */
1598 {"fs-uboot", 0x00000, 0x20000},
1599 {"firmware", 0x20000, 0xf30000},
1600 {"default-mac", 0xf50000, 0x00200},
1601 {"pin", 0xf50200, 0x00200},
1602 {"product-info", 0xf50400, 0x0fc00},
1603 {"soft-version", 0xf60000, 0x0b000},
1604 {"support-list", 0xf6b000, 0x04000},
1605 {"profile", 0xf70000, 0x04000},
1606 {"default-config", 0xf74000, 0x0b000},
1607 {"user-config", 0xf80000, 0x40000},
1608 {"partition-table", 0xfc0000, 0x10000},
1609 {"log", 0xfd0000, 0x20000},
1610 {"radio", 0xff0000, 0x10000},
1614 .first_sysupgrade_partition
= "os-image",
1615 .last_sysupgrade_partition
= "file-system"
1618 /** Firmware layout for the TL-WR902AC v1 */
1620 .id
= "TL-WR902AC-V1",
1624 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1625 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1626 .support_trail
= '\x00',
1630 384KB were moved from file-system to os-image
1631 in comparison to the stock image
1634 {"fs-uboot", 0x00000, 0x20000},
1635 {"firmware", 0x20000, 0x730000},
1636 {"default-mac", 0x750000, 0x00200},
1637 {"pin", 0x750200, 0x00200},
1638 {"product-info", 0x750400, 0x0fc00},
1639 {"soft-version", 0x760000, 0x0b000},
1640 {"support-list", 0x76b000, 0x04000},
1641 {"profile", 0x770000, 0x04000},
1642 {"default-config", 0x774000, 0x0b000},
1643 {"user-config", 0x780000, 0x40000},
1644 {"partition-table", 0x7c0000, 0x10000},
1645 {"log", 0x7d0000, 0x20000},
1646 {"radio", 0x7f0000, 0x10000},
1650 .first_sysupgrade_partition
= "os-image",
1651 .last_sysupgrade_partition
= "file-system",
1654 /** Firmware layout for the TL-WR942N V1 */
1660 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1661 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1662 .support_trail
= '\x00',
1666 {"fs-uboot", 0x00000, 0x20000},
1667 {"firmware", 0x20000, 0xe20000},
1668 {"default-mac", 0xe40000, 0x00200},
1669 {"pin", 0xe40200, 0x00200},
1670 {"product-info", 0xe40400, 0x0fc00},
1671 {"partition-table", 0xe50000, 0x10000},
1672 {"soft-version", 0xe60000, 0x10000},
1673 {"support-list", 0xe70000, 0x10000},
1674 {"profile", 0xe80000, 0x10000},
1675 {"default-config", 0xe90000, 0x10000},
1676 {"user-config", 0xea0000, 0x40000},
1677 {"qos-db", 0xee0000, 0x40000},
1678 {"certificate", 0xf20000, 0x10000},
1679 {"usb-config", 0xfb0000, 0x10000},
1680 {"log", 0xfc0000, 0x20000},
1681 {"radio-bk", 0xfe0000, 0x10000},
1682 {"radio", 0xff0000, 0x10000},
1686 .first_sysupgrade_partition
= "os-image",
1687 .last_sysupgrade_partition
= "file-system",
1690 /** Firmware layout for the RE200 v2 */
1696 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1697 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1698 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1699 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1700 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1701 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1702 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1703 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1704 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1705 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1706 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1707 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1708 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1709 .support_trail
= '\x00',
1713 {"fs-uboot", 0x00000, 0x20000},
1714 {"firmware", 0x20000, 0x7a0000},
1715 {"partition-table", 0x7c0000, 0x02000},
1716 {"default-mac", 0x7c2000, 0x00020},
1717 {"pin", 0x7c2100, 0x00020},
1718 {"product-info", 0x7c3100, 0x01000},
1719 {"soft-version", 0x7c4200, 0x01000},
1720 {"support-list", 0x7c5200, 0x01000},
1721 {"profile", 0x7c6200, 0x08000},
1722 {"config-info", 0x7ce200, 0x00400},
1723 {"user-config", 0x7d0000, 0x10000},
1724 {"default-config", 0x7e0000, 0x10000},
1725 {"radio", 0x7f0000, 0x10000},
1729 .first_sysupgrade_partition
= "os-image",
1730 .last_sysupgrade_partition
= "file-system"
1733 /** Firmware layout for the RE200 v3 */
1739 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1740 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1741 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1742 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1743 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1744 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1745 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1746 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1747 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1748 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1749 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1750 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1751 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1752 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1753 .support_trail
= '\x00',
1757 {"fs-uboot", 0x00000, 0x20000},
1758 {"firmware", 0x20000, 0x7a0000},
1759 {"partition-table", 0x7c0000, 0x02000},
1760 {"default-mac", 0x7c2000, 0x00020},
1761 {"pin", 0x7c2100, 0x00020},
1762 {"product-info", 0x7c3100, 0x01000},
1763 {"soft-version", 0x7c4200, 0x01000},
1764 {"support-list", 0x7c5200, 0x01000},
1765 {"profile", 0x7c6200, 0x08000},
1766 {"config-info", 0x7ce200, 0x00400},
1767 {"user-config", 0x7d0000, 0x10000},
1768 {"default-config", 0x7e0000, 0x10000},
1769 {"radio", 0x7f0000, 0x10000},
1773 .first_sysupgrade_partition
= "os-image",
1774 .last_sysupgrade_partition
= "file-system"
1777 /** Firmware layout for the RE220 v2 */
1783 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1784 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1785 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1786 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1787 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1788 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1789 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1790 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1791 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1792 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1793 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1794 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1795 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1796 .support_trail
= '\x00',
1800 {"fs-uboot", 0x00000, 0x20000},
1801 {"firmware", 0x20000, 0x7a0000},
1802 {"partition-table", 0x7c0000, 0x02000},
1803 {"default-mac", 0x7c2000, 0x00020},
1804 {"pin", 0x7c2100, 0x00020},
1805 {"product-info", 0x7c3100, 0x01000},
1806 {"soft-version", 0x7c4200, 0x01000},
1807 {"support-list", 0x7c5200, 0x01000},
1808 {"profile", 0x7c6200, 0x08000},
1809 {"config-info", 0x7ce200, 0x00400},
1810 {"user-config", 0x7d0000, 0x10000},
1811 {"default-config", 0x7e0000, 0x10000},
1812 {"radio", 0x7f0000, 0x10000},
1816 .first_sysupgrade_partition
= "os-image",
1817 .last_sysupgrade_partition
= "file-system"
1820 /** Firmware layout for the RE305 v1 */
1826 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1827 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1828 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1829 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1830 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1831 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1832 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1833 .support_trail
= '\x00',
1837 {"fs-uboot", 0x00000, 0x20000},
1838 {"firmware", 0x20000, 0x5e0000},
1839 {"partition-table", 0x600000, 0x02000},
1840 {"default-mac", 0x610000, 0x00020},
1841 {"pin", 0x610100, 0x00020},
1842 {"product-info", 0x611100, 0x01000},
1843 {"soft-version", 0x620000, 0x01000},
1844 {"support-list", 0x621000, 0x01000},
1845 {"profile", 0x622000, 0x08000},
1846 {"user-config", 0x630000, 0x10000},
1847 {"default-config", 0x640000, 0x10000},
1848 {"radio", 0x7f0000, 0x10000},
1852 .first_sysupgrade_partition
= "os-image",
1853 .last_sysupgrade_partition
= "file-system"
1856 /** Firmware layout for the RE350 v1 */
1862 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1863 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1864 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1865 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1866 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1867 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1868 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1869 .support_trail
= '\x00',
1872 /** We're using a dynamic kernel/rootfs split here */
1874 {"fs-uboot", 0x00000, 0x20000},
1875 {"firmware", 0x20000, 0x5e0000},
1876 {"partition-table", 0x600000, 0x02000},
1877 {"default-mac", 0x610000, 0x00020},
1878 {"pin", 0x610100, 0x00020},
1879 {"product-info", 0x611100, 0x01000},
1880 {"soft-version", 0x620000, 0x01000},
1881 {"support-list", 0x621000, 0x01000},
1882 {"profile", 0x622000, 0x08000},
1883 {"user-config", 0x630000, 0x10000},
1884 {"default-config", 0x640000, 0x10000},
1885 {"radio", 0x7f0000, 0x10000},
1889 .first_sysupgrade_partition
= "os-image",
1890 .last_sysupgrade_partition
= "file-system"
1893 /** Firmware layout for the RE350K v1 */
1899 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1900 .support_trail
= '\x00',
1903 /** We're using a dynamic kernel/rootfs split here */
1905 {"fs-uboot", 0x00000, 0x20000},
1906 {"firmware", 0x20000, 0xd70000},
1907 {"partition-table", 0xd90000, 0x02000},
1908 {"default-mac", 0xda0000, 0x00020},
1909 {"pin", 0xda0100, 0x00020},
1910 {"product-info", 0xda1100, 0x01000},
1911 {"soft-version", 0xdb0000, 0x01000},
1912 {"support-list", 0xdb1000, 0x01000},
1913 {"profile", 0xdb2000, 0x08000},
1914 {"user-config", 0xdc0000, 0x10000},
1915 {"default-config", 0xdd0000, 0x10000},
1916 {"device-id", 0xde0000, 0x00108},
1917 {"radio", 0xff0000, 0x10000},
1921 .first_sysupgrade_partition
= "os-image",
1922 .last_sysupgrade_partition
= "file-system"
1925 /** Firmware layout for the RE355 */
1931 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1932 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1933 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1934 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1935 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1936 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1937 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1938 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1939 .support_trail
= '\x00',
1942 /* We're using a dynamic kernel/rootfs split here */
1944 {"fs-uboot", 0x00000, 0x20000},
1945 {"firmware", 0x20000, 0x5e0000},
1946 {"partition-table", 0x600000, 0x02000},
1947 {"default-mac", 0x610000, 0x00020},
1948 {"pin", 0x610100, 0x00020},
1949 {"product-info", 0x611100, 0x01000},
1950 {"soft-version", 0x620000, 0x01000},
1951 {"support-list", 0x621000, 0x01000},
1952 {"profile", 0x622000, 0x08000},
1953 {"user-config", 0x630000, 0x10000},
1954 {"default-config", 0x640000, 0x10000},
1955 {"radio", 0x7f0000, 0x10000},
1959 .first_sysupgrade_partition
= "os-image",
1960 .last_sysupgrade_partition
= "file-system"
1963 /** Firmware layout for the RE450 */
1969 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1970 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1971 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1972 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1973 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1974 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1975 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1976 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1977 .support_trail
= '\x00',
1980 /** We're using a dynamic kernel/rootfs split here */
1982 {"fs-uboot", 0x00000, 0x20000},
1983 {"firmware", 0x20000, 0x5e0000},
1984 {"partition-table", 0x600000, 0x02000},
1985 {"default-mac", 0x610000, 0x00020},
1986 {"pin", 0x610100, 0x00020},
1987 {"product-info", 0x611100, 0x01000},
1988 {"soft-version", 0x620000, 0x01000},
1989 {"support-list", 0x621000, 0x01000},
1990 {"profile", 0x622000, 0x08000},
1991 {"user-config", 0x630000, 0x10000},
1992 {"default-config", 0x640000, 0x10000},
1993 {"radio", 0x7f0000, 0x10000},
1997 .first_sysupgrade_partition
= "os-image",
1998 .last_sysupgrade_partition
= "file-system"
2001 /** Firmware layout for the RE450 v2 */
2007 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2008 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2009 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2010 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2011 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2012 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2013 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2014 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2015 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2016 .support_trail
= '\x00',
2019 /* We're using a dynamic kernel/rootfs split here */
2021 {"fs-uboot", 0x00000, 0x20000},
2022 {"firmware", 0x20000, 0x5e0000},
2023 {"partition-table", 0x600000, 0x02000},
2024 {"default-mac", 0x610000, 0x00020},
2025 {"pin", 0x610100, 0x00020},
2026 {"product-info", 0x611100, 0x01000},
2027 {"soft-version", 0x620000, 0x01000},
2028 {"support-list", 0x621000, 0x01000},
2029 {"profile", 0x622000, 0x08000},
2030 {"user-config", 0x630000, 0x10000},
2031 {"default-config", 0x640000, 0x10000},
2032 {"radio", 0x7f0000, 0x10000},
2036 .first_sysupgrade_partition
= "os-image",
2037 .last_sysupgrade_partition
= "file-system"
2040 /** Firmware layout for the RE450 v3 */
2046 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2047 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2048 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2049 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2050 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2051 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2052 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2053 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2054 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2055 .support_trail
= '\x00',
2058 /* We're using a dynamic kernel/rootfs split here */
2060 {"fs-uboot", 0x00000, 0x20000},
2061 {"default-mac", 0x20000, 0x00020},
2062 {"pin", 0x20020, 0x00020},
2063 {"product-info", 0x21000, 0x01000},
2064 {"partition-table", 0x22000, 0x02000},
2065 {"soft-version", 0x24000, 0x01000},
2066 {"support-list", 0x25000, 0x01000},
2067 {"profile", 0x26000, 0x08000},
2068 {"user-config", 0x2e000, 0x10000},
2069 {"default-config", 0x3e000, 0x10000},
2070 {"config-info", 0x4e000, 0x00400},
2071 {"firmware", 0x50000, 0x7a0000},
2072 {"radio", 0x7f0000, 0x10000},
2076 .first_sysupgrade_partition
= "os-image",
2077 .last_sysupgrade_partition
= "file-system"
2080 /** Firmware layout for the RE500 */
2086 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2087 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2088 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2089 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2090 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2091 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2092 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2093 .support_trail
= '\x00',
2096 /* We're using a dynamic kernel/rootfs split here */
2098 {"fs-uboot", 0x00000, 0x20000},
2099 {"firmware", 0x20000, 0xde0000},
2100 {"partition-table", 0xe00000, 0x02000},
2101 {"default-mac", 0xe10000, 0x00020},
2102 {"pin", 0xe10100, 0x00020},
2103 {"product-info", 0xe11100, 0x01000},
2104 {"soft-version", 0xe20000, 0x01000},
2105 {"support-list", 0xe21000, 0x01000},
2106 {"profile", 0xe22000, 0x08000},
2107 {"user-config", 0xe30000, 0x10000},
2108 {"default-config", 0xe40000, 0x10000},
2109 {"radio", 0xff0000, 0x10000},
2113 .first_sysupgrade_partition
= "os-image",
2114 .last_sysupgrade_partition
= "file-system"
2117 /** Firmware layout for the RE650 */
2123 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2124 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2125 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2126 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2127 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2128 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2129 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2130 .support_trail
= '\x00',
2133 /* We're using a dynamic kernel/rootfs split here */
2135 {"fs-uboot", 0x00000, 0x20000},
2136 {"firmware", 0x20000, 0xde0000},
2137 {"partition-table", 0xe00000, 0x02000},
2138 {"default-mac", 0xe10000, 0x00020},
2139 {"pin", 0xe10100, 0x00020},
2140 {"product-info", 0xe11100, 0x01000},
2141 {"soft-version", 0xe20000, 0x01000},
2142 {"support-list", 0xe21000, 0x01000},
2143 {"profile", 0xe22000, 0x08000},
2144 {"user-config", 0xe30000, 0x10000},
2145 {"default-config", 0xe40000, 0x10000},
2146 {"radio", 0xff0000, 0x10000},
2150 .first_sysupgrade_partition
= "os-image",
2151 .last_sysupgrade_partition
= "file-system"
2157 #define error(_ret, _errno, _str, ...) \
2159 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2160 strerror(_errno)); \
2166 /** Stores a uint32 as big endian */
2167 static inline void put32(uint8_t *buf
, uint32_t val
) {
2174 /** Allocates a new image partition */
2175 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2176 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2178 error(1, errno
, "malloc");
2183 /** Frees an image partition */
2184 static void free_image_partition(struct image_partition_entry entry
) {
2188 static time_t source_date_epoch
= -1;
2189 static void set_source_date_epoch() {
2190 char *env
= getenv("SOURCE_DATE_EPOCH");
2194 source_date_epoch
= strtoull(env
, &endptr
, 10);
2195 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2196 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2202 /** Generates the partition-table partition */
2203 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2204 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2206 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2214 for (i
= 0; p
[i
].name
; i
++) {
2216 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2219 error(1, 0, "flash partition table overflow?");
2226 memset(s
, 0xff, end
-s
);
2232 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2233 static inline uint8_t bcd(uint8_t v
) {
2234 return 0x10 * (v
/10) + v
%10;
2238 /** Generates the soft-version partition */
2239 static struct image_partition_entry
make_soft_version(struct device_info
*info
, uint32_t rev
) {
2240 size_t part_len
= sizeof(struct soft_version
);
2241 if (info
->soft_ver_compat_level
> 0)
2242 part_len
+= sizeof(uint32_t);
2244 struct image_partition_entry entry
=
2245 alloc_image_partition("soft-version", part_len
+1);
2246 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2250 if (source_date_epoch
!= -1)
2251 t
= source_date_epoch
;
2252 else if (time(&t
) == (time_t)(-1))
2253 error(1, errno
, "time");
2255 struct tm
*tm
= gmtime(&t
);
2257 /* Partition contents size, minus 8 byte header and trailing byte */
2258 s
->data_len
= htonl(entry
.size
-9);
2262 s
->version_major
= 0;
2263 s
->version_minor
= 0;
2264 s
->version_patch
= 0;
2266 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2267 s
->year_lo
= bcd(tm
->tm_year
%100);
2268 s
->month
= bcd(tm
->tm_mon
+1);
2269 s
->day
= bcd(tm
->tm_mday
);
2270 s
->rev
= htonl(rev
);
2272 if (info
->soft_ver_compat_level
> 0)
2273 *(uint32_t *)(entry
.data
+ sizeof(struct soft_version
)) =
2274 htonl(info
->soft_ver_compat_level
);
2276 entry
.data
[entry
.size
-1] = 0xff;
2281 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2282 /** String length _including_ the terminating zero byte */
2283 uint32_t ver_len
= strlen(soft_ver
) + 1;
2284 /** Partition contains 64 bit header, the version string, and one additional null byte */
2285 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2286 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2288 uint32_t *len
= (uint32_t *)entry
.data
;
2289 len
[0] = htonl(ver_len
);
2291 memcpy(&len
[2], soft_ver
, ver_len
);
2293 entry
.data
[partition_len
- 1] = 0;
2298 /** Generates the support-list partition */
2299 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2300 size_t len
= strlen(info
->support_list
);
2301 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2303 put32(entry
.data
, len
);
2304 memset(entry
.data
+4, 0, 4);
2305 memcpy(entry
.data
+8, info
->support_list
, len
);
2306 entry
.data
[len
+8] = info
->support_trail
;
2311 /** Creates a new image partition with an arbitrary name from a file */
2312 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2313 struct stat statbuf
;
2315 if (stat(filename
, &statbuf
) < 0)
2316 error(1, errno
, "unable to stat file `%s'", filename
);
2318 size_t len
= statbuf
.st_size
;
2320 if (add_jffs2_eof
) {
2321 if (file_system_partition
)
2322 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2324 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2327 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2329 FILE *file
= fopen(filename
, "rb");
2331 error(1, errno
, "unable to open file `%s'", filename
);
2333 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2334 error(1, errno
, "unable to read file `%s'", filename
);
2336 if (add_jffs2_eof
) {
2337 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2339 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2340 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2348 /** Creates a new image partition from arbitrary data */
2349 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2351 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2353 memcpy(entry
.data
, datain
, len
);
2359 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2361 Example image partition table:
2363 fwup-ptn partition-table base 0x00800 size 0x00800
2364 fwup-ptn os-image base 0x01000 size 0x113b45
2365 fwup-ptn file-system base 0x114b45 size 0x1d0004
2366 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2368 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2369 the end of the partition table is marked with a zero byte.
2371 The firmware image must contain at least the partition-table and support-list partitions
2372 to be accepted. There aren't any alignment constraints for the image partitions.
2374 The partition-table partition contains the actual flash layout; partitions
2375 from the image partition table are mapped to the corresponding flash partitions during
2376 the firmware upgrade. The support-list partition contains a list of devices supported by
2379 The base offsets in the firmware partition table are relative to the end
2380 of the vendor information block, so the partition-table partition will
2381 actually start at offset 0x1814 of the image.
2383 I think partition-table must be the first partition in the firmware image.
2385 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2387 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2389 size_t base
= 0x800;
2390 for (i
= 0; parts
[i
].name
; i
++) {
2391 for (j
= 0; flash_parts
[j
].name
; j
++) {
2392 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2393 if (parts
[i
].size
> flash_parts
[j
].size
)
2394 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2399 assert(flash_parts
[j
].name
);
2401 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2403 size_t len
= end
-image_pt
;
2404 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2407 error(1, 0, "image partition table overflow?");
2411 base
+= parts
[i
].size
;
2415 /** Generates and writes the image MD5 checksum */
2416 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2420 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2421 MD5_Update(&ctx
, buffer
, len
);
2422 MD5_Final(md5
, &ctx
);
2427 Generates the firmware image in factory format
2433 0000-0003 Image size (4 bytes, big endian)
2434 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2435 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2436 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2437 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2438 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2439 1814-xxxx Firmware partitions
2441 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2445 for (i
= 0; parts
[i
].name
; i
++)
2446 *len
+= parts
[i
].size
;
2448 uint8_t *image
= malloc(*len
);
2450 error(1, errno
, "malloc");
2452 memset(image
, 0xff, *len
);
2456 size_t vendor_len
= strlen(info
->vendor
);
2457 put32(image
+0x14, vendor_len
);
2458 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2461 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2462 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2468 Generates the firmware image in sysupgrade format
2470 This makes some assumptions about the provided flash and image partition tables and
2471 should be generalized when TP-LINK starts building its safeloader into hardware with
2472 different flash layouts.
2474 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2476 size_t flash_first_partition_index
= 0;
2477 size_t flash_last_partition_index
= 0;
2478 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2479 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2480 const struct image_partition_entry
*image_last_partition
= NULL
;
2482 /** Find first and last partitions */
2483 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2484 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2485 flash_first_partition
= &info
->partitions
[i
];
2486 flash_first_partition_index
= i
;
2487 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2488 flash_last_partition
= &info
->partitions
[i
];
2489 flash_last_partition_index
= i
;
2493 assert(flash_first_partition
&& flash_last_partition
);
2494 assert(flash_first_partition_index
< flash_last_partition_index
);
2496 /** Find last partition from image to calculate needed size */
2497 for (i
= 0; image_parts
[i
].name
; i
++) {
2498 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2499 image_last_partition
= &image_parts
[i
];
2504 assert(image_last_partition
);
2506 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2508 uint8_t *image
= malloc(*len
);
2510 error(1, errno
, "malloc");
2512 memset(image
, 0xff, *len
);
2514 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2515 for (j
= 0; image_parts
[j
].name
; j
++) {
2516 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2517 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2518 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2519 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2523 assert(image_parts
[j
].name
);
2530 /** Generates an image according to a given layout and writes it to a file */
2531 static void build_image(const char *output
,
2532 const char *kernel_image
,
2533 const char *rootfs_image
,
2537 struct device_info
*info
) {
2541 struct image_partition_entry parts
[7] = {};
2543 struct flash_partition_entry
*firmware_partition
= NULL
;
2544 struct flash_partition_entry
*os_image_partition
= NULL
;
2545 struct flash_partition_entry
*file_system_partition
= NULL
;
2546 size_t firmware_partition_index
= 0;
2548 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2549 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2551 firmware_partition
= &info
->partitions
[i
];
2552 firmware_partition_index
= i
;
2556 if (firmware_partition
)
2558 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2559 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2562 if (stat(kernel_image
, &kernel
) < 0)
2563 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2565 if (kernel
.st_size
> firmware_partition
->size
)
2566 error(1, 0, "kernel overflowed firmware partition\n");
2568 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2569 info
->partitions
[i
+1] = info
->partitions
[i
];
2571 file_system_partition
->name
= "file-system";
2572 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2574 /* Align partition start to erase blocks for factory images only */
2576 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2578 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2580 os_image_partition
->name
= "os-image";
2581 os_image_partition
->size
= kernel
.st_size
;
2584 parts
[0] = make_partition_table(info
->partitions
);
2586 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2588 parts
[1] = make_soft_version(info
, rev
);
2590 parts
[2] = make_support_list(info
);
2591 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2592 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2594 /* Some devices need the extra-para partition to accept the firmware */
2595 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2596 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2597 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2598 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2599 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2600 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2601 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2602 parts
[5] = put_data("extra-para", mdat
, 11);
2603 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2604 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2605 parts
[5] = put_data("extra-para", mdat
, 11);
2606 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2607 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2608 parts
[5] = put_data("extra-para", mdat
, 11);
2609 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2610 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2611 parts
[5] = put_data("extra-para", mdat
, 11);
2612 } else if (strcasecmp(info
->id
, "EAP245-V3") == 0) {
2613 const char mdat
[10] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01};
2614 parts
[5] = put_data("extra-para", mdat
, 10);
2620 image
= generate_sysupgrade_image(info
, parts
, &len
);
2622 image
= generate_factory_image(info
, parts
, &len
);
2624 FILE *file
= fopen(output
, "wb");
2626 error(1, errno
, "unable to open output file");
2628 if (fwrite(image
, len
, 1, file
) != 1)
2629 error(1, 0, "unable to write output file");
2635 for (i
= 0; parts
[i
].name
; i
++)
2636 free_image_partition(parts
[i
]);
2640 static void usage(const char *argv0
) {
2642 "Usage: %s [OPTIONS...]\n"
2645 " -h show this help\n"
2647 "Create a new image:\n"
2648 " -B <board> create image for the board specified with <board>\n"
2649 " -k <file> read kernel image from the file <file>\n"
2650 " -r <file> read rootfs image from the file <file>\n"
2651 " -o <file> write output to the file <file>\n"
2652 " -V <rev> sets the revision number to <rev>\n"
2653 " -j add jffs2 end-of-filesystem markers\n"
2654 " -S create sysupgrade instead of factory image\n"
2655 "Extract an old image:\n"
2656 " -x <file> extract all oem firmware partition\n"
2657 " -d <dir> destination to extract the firmware partition\n"
2658 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2664 static struct device_info
*find_board(const char *id
)
2666 struct device_info
*board
= NULL
;
2668 for (board
= boards
; board
->id
!= NULL
; board
++)
2669 if (strcasecmp(id
, board
->id
) == 0)
2675 static int add_flash_partition(
2676 struct flash_partition_entry
*part_list
,
2683 /* check if the list has a free entry */
2684 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2685 if (part_list
->name
== NULL
&&
2686 part_list
->base
== 0 &&
2687 part_list
->size
== 0)
2691 if (ptr
== max_entries
) {
2692 error(1, 0, "No free flash part entry available.");
2695 part_list
->name
= calloc(1, strlen(name
) + 1);
2696 if (!part_list
->name
) {
2697 error(1, 0, "Unable to allocate memory");
2700 memcpy((char *)part_list
->name
, name
, strlen(name
));
2701 part_list
->base
= base
;
2702 part_list
->size
= size
;
2707 /** read the partition table into struct flash_partition_entry */
2708 static int read_partition_table(
2709 FILE *file
, long offset
,
2710 struct flash_partition_entry
*entries
, size_t max_entries
,
2715 const char *parthdr
= NULL
;
2716 const char *fwuphdr
= "fwup-ptn";
2717 const char *flashhdr
= "partition";
2719 /* TODO: search for the partition table */
2729 error(1, 0, "Invalid partition table");
2732 if (fseek(file
, offset
, SEEK_SET
) < 0)
2733 error(1, errno
, "Can not seek in the firmware");
2735 if (fread(buf
, 2048, 1, file
) != 1)
2736 error(1, errno
, "Can not read fwup-ptn from the firmware");
2740 /* look for the partition header */
2741 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2742 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2747 end
= buf
+ sizeof(buf
);
2748 while ((ptr
+ strlen(parthdr
)) < end
&&
2749 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2753 char name
[32] = { 0 };
2755 unsigned long base
= 0;
2756 unsigned long size
= 0;
2758 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2759 if (end_part
== NULL
) {
2760 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2764 for (int i
= 0; i
<= 4; i
++) {
2765 if (end_part
<= ptr
)
2768 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2769 if (end_element
== NULL
) {
2770 error(1, errno
, "Ignoring the rest of the partition entries.");
2775 /* partition header */
2777 ptr
= end_element
+ 1;
2781 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2782 strncpy(name
, ptr
, name_len
);
2783 name
[name_len
] = '\0';
2784 ptr
= end_element
+ 1;
2789 ptr
= end_element
+ 1;
2794 base
= strtoul(ptr
, NULL
, 16);
2795 ptr
= end_element
+ 1;
2800 ptr
= end_element
+ 1;
2801 /* actual size. The last element doesn't have a sepeartor */
2802 size
= strtoul(ptr
, NULL
, 16);
2803 /* the part ends with 0x09, 0x0d, 0x0a */
2805 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2814 static void write_partition(
2816 size_t firmware_offset
,
2817 struct flash_partition_entry
*entry
,
2823 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2825 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2826 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2827 error(1, errno
, "Can not read partition from input_file");
2829 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2830 error(1, errno
, "Can not write partition to output_file");
2832 /* write last chunk smaller than buffer */
2833 if (offset
< entry
->size
) {
2834 offset
= entry
->size
- offset
;
2835 if (fread(buf
, offset
, 1, input_file
) != 1)
2836 error(1, errno
, "Can not read partition from input_file");
2837 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2838 error(1, errno
, "Can not write partition to output_file");
2842 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2845 char output
[PATH_MAX
];
2847 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2848 output_file
= fopen(output
, "wb+");
2849 if (output_file
== NULL
) {
2850 error(1, errno
, "Can not open output file %s", output
);
2853 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2855 fclose(output_file
);
2860 /** extract all partitions from the firmware file */
2861 static int extract_firmware(const char *input
, const char *output_directory
)
2863 struct flash_partition_entry entries
[16] = { 0 };
2864 size_t max_entries
= 16;
2865 size_t firmware_offset
= 0x1014;
2868 struct stat statbuf
;
2870 /* check input file */
2871 if (stat(input
, &statbuf
)) {
2872 error(1, errno
, "Can not read input firmware %s", input
);
2875 /* check if output directory exists */
2876 if (stat(output_directory
, &statbuf
)) {
2877 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2880 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2881 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2884 input_file
= fopen(input
, "rb");
2886 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2887 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2890 for (size_t i
= 0; i
< max_entries
; i
++) {
2891 if (entries
[i
].name
== NULL
&&
2892 entries
[i
].base
== 0 &&
2893 entries
[i
].size
== 0)
2896 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2902 static struct flash_partition_entry
*find_partition(
2903 struct flash_partition_entry
*entries
, size_t max_entries
,
2904 const char *name
, const char *error_msg
)
2906 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2907 if (strcmp(entries
->name
, name
) == 0)
2911 error(1, 0, "%s", error_msg
);
2915 static void write_ff(FILE *output_file
, size_t size
)
2920 memset(buf
, 0xff, sizeof(buf
));
2922 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2923 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2924 error(1, errno
, "Can not write 0xff to output_file");
2927 /* write last chunk smaller than buffer */
2928 if (offset
< size
) {
2929 offset
= size
- offset
;
2930 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2931 error(1, errno
, "Can not write partition to output_file");
2935 static void convert_firmware(const char *input
, const char *output
)
2937 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2938 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2939 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2940 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2941 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2942 size_t firmware_offset
= 0x1014;
2943 FILE *input_file
, *output_file
;
2945 struct stat statbuf
;
2947 /* check input file */
2948 if (stat(input
, &statbuf
)) {
2949 error(1, errno
, "Can not read input firmware %s", input
);
2952 input_file
= fopen(input
, "rb");
2954 error(1, 0, "Can not open input firmware %s", input
);
2956 output_file
= fopen(output
, "wb");
2958 error(1, 0, "Can not open output firmware %s", output
);
2960 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2961 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2964 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2965 "os-image", "Error can not find os-image partition (fwup)");
2966 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2967 "file-system", "Error can not find file-system partition (fwup)");
2968 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2969 "partition-table", "Error can not find partition-table partition");
2971 /* the flash partition table has a 0x00000004 magic haeder */
2972 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2973 error(1, 0, "Error can not read the partition table (flash)");
2975 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2976 "os-image", "Error can not find os-image partition (flash)");
2977 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2978 "file-system", "Error can not find file-system partition (flash)");
2980 /* write os_image to 0x0 */
2981 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2982 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2984 /* write file-system behind os_image */
2985 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2986 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2987 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2989 fclose(output_file
);
2993 int main(int argc
, char *argv
[]) {
2994 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2995 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2996 bool add_jffs2_eof
= false, sysupgrade
= false;
2998 struct device_info
*info
;
2999 set_source_date_epoch();
3004 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3014 kernel_image
= optarg
;
3018 rootfs_image
= optarg
;
3026 sscanf(optarg
, "r%u", &rev
);
3030 add_jffs2_eof
= true;
3042 output_directory
= optarg
;
3046 extract_image
= optarg
;
3050 convert_image
= optarg
;
3059 if (extract_image
|| output_directory
) {
3061 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3062 if (!output_directory
)
3063 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3064 extract_firmware(extract_image
, output_directory
);
3065 } else if (convert_image
) {
3067 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3068 convert_firmware(convert_image
, output
);
3071 error(1, 0, "no board has been specified");
3073 error(1, 0, "no kernel image has been specified");
3075 error(1, 0, "no rootfs image has been specified");
3077 error(1, 0, "no output filename has been specified");
3079 info
= find_board(board
);
3082 error(1, 0, "unsupported board %s", board
);
3084 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);