IMAGE_KERNEL = $(word 1,$^)
IMAGE_ROOTFS = $(word 2,$^)
+define rootfs_align
+$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
+endef
+
define Build/uImage
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
mv $@.new $@
endef
-# blow up binary to given size and put a given string at its end:
-# cameo-factory <size[k]> <string>
-define Build/cameo-factory
- factory_stamp=$(word 2,$(1)); \
- ((reduced_size=$(subst k,*1024,$(word 1,$(1)))-$${#factory_stamp})); \
- ( \
- dd if=$@ bs=$$reduced_size conv=sync; \
- echo -n $$factory_stamp; \
- ) > $@.new && \
+define Build/eva-image
+ $(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
mv $@.new $@
endef
-# blow up binary to given size and put a given string at its end:
-# cameo-factory <size[k]> <string>
-define Build/cameo-factory
- factory_stamp=$(word 2,$(1)); \
- ((reduced_size=$(subst k,*1024,$(word 1,$(1)))-$${#factory_stamp})); \
- ( \
- dd if=$@ bs=$$reduced_size conv=sync; \
- echo -n $$factory_stamp; \
- ) > $@.new && \
- mv $@.new $@
+define Build/seama
+ $(STAGING_DIR_HOST)/bin/seama -i $@ \
+ -m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
+ mv $@.seama $@
endef
-define Build/eva-image
- $(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
- mv $@.new $@
+define Build/seama-seal
+ $(STAGING_DIR_HOST)/bin/seama -i $@ -s $@.seama \
+ -m "signature=$(SEAMA_SIGNATURE)"
+ mv $@.seama $@
endef
define Build/zyxel-ras-image
cat $@.fakesquashfs >> $@
endef
+define Build/append-string
+ echo -n $(1) >> $@
+endef
+
# append a fake/empty uImage header, to fool bootloaders rootfs integrity check
# for example
define Build/append-uImage-fakehdr
+ $(eval type=$(word 1,$(1)))
+ $(eval magic=$(word 2,$(1)))
touch $@.fakehdr
$(STAGING_DIR_HOST)/bin/mkimage \
- -A $(LINUX_KARCH) -O linux -T $(1) -C none \
- -n '$(VERSION_DIST) fake $(1)' \
+ -A $(LINUX_KARCH) -O linux -T $(type) -C none \
+ -n '$(VERSION_DIST) fake $(type)' \
+ $(if $(magic),-M $(magic)) \
-d $@.fakehdr \
-s \
$@.fakehdr
endef
define Build/tplink-safeloader
- -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD_ID) \
-V $(REVISION) \
-k $(IMAGE_KERNEL) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@
endef
-define Build/mksercommfw
- -$(STAGING_DIR_HOST)/bin/mksercommfw \
- $@ \
- $(KERNEL_OFFSET) \
- $(HWID) \
- $(HWVER) \
- $(SWVER)
-endef
-
-
define Build/append-dtb
cat $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb >> $@
endef
define Build/install-dtb
- $(foreach dts,$(DEVICE_DTS), \
- $(CP) \
- $(DTS_DIR)/$(dts).dtb \
- $(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
+ $(call locked, \
+ $(foreach dts,$(DEVICE_DTS), \
+ $(CP) \
+ $(DTS_DIR)/$(dts).dtb \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
+ ), \
+ install-dtb-$(IMG_PREFIX) \
)
endef
@mv $@.new $@
endef
+define Build/zip
+ mkdir $@.tmp
+ mv $@ $@.tmp/$(1)
+
+ zip -j -X \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="$(SOURCE_DATE_EPOCH)") \
+ $@ $@.tmp/$(if $(1),$(1),$@)
+ rm -rf $@.tmp
+endef
+
define Build/jffs2
rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \
mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(1)) && \
endef
define Build/pad-to
- dd if=$@ of=$@.new bs=$(1) conv=sync
- mv $@.new $@
+ $(call Image/pad-to,$@,$(1))
endef
define Build/pad-extra
mv $@.new $@
endef
+define Build/xor-image
+ $(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1)
+ mv $@.xor $@
+endef
+
define Build/check-size
- @[ $$(($(subst k,* 1024,$(subst m, * 1024k,$(1))))) -ge "$$(stat -c%s $@)" ] || { \
- echo "WARNING: Image file $@ is too big" >&2; \
+ @imagesize="$$(stat -c%s $@)"; \
+ limitsize="$$(($(subst k,* 1024,$(subst m, * 1024k,$(if $(1),$(1),$(IMAGE_SIZE))))))"; \
+ [ $$limitsize -ge $$imagesize ] || { \
+ echo "WARNING: Image file $@ is too big: $$imagesize > $$limitsize" >&2; \
rm -f $@; \
}
endef
@mv $@.new $@
endef
+define Build/linksys-image
+ $(TOPDIR)/scripts/linksys-image.sh \
+ "$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
+ $@ $@.new
+ mv $@.new $@
+endef
+
define Build/openmesh-image
$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
+define Build/qsdk-ipq-factory-nand
+ $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
+ $@.its ubi $@
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv $@.new $@
+endef
+
+define Build/qsdk-ipq-factory-nor
+ $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
+ $@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv $@.new $@
+endef
+
define Build/senao-header
$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
mv $@.new $@
@mv $@.new $@
endef
+# combine kernel and rootfs into one image
+# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
+# <type> is "sysupgrade" or "factory"
+#
+# -a align the rootfs start on an <align> bytes boundary
+# -j add jffs2 end-of-filesystem markers
+# -s strip padding from end of the image
+# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
+define Build/tplink-v1-image
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
+ -N "$(VERSION_DIST)" -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
+ -k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new -j -X 0x40000 \
+ -a $(call rootfs_align,$(FILESYSTEM)) \
+ $(wordlist 2,$(words $(1)),$(1)) \
+ $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
+endef
+
define Build/tplink-v2-header
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
rm -rf $@.new
endef
+compat_version=$(if $(DEVICE_COMPAT_VERSION),$(DEVICE_COMPAT_VERSION),1.0)
json_quote=$(subst ','\'',$(subst ",\",$(1)))
#")')
+
+legacy_supported_message=$(SUPPORTED_DEVICES) - Image version mismatch: image $(compat_version), \
+ device 1.0. Please wipe config during upgrade (force required) or reinstall. \
+ $(if $(DEVICE_COMPAT_MESSAGE),Reason: $(DEVICE_COMPAT_MESSAGE),Please check documentation ...)
+
metadata_devices=$(if $(1),$(subst "$(space)","$(comma)",$(strip $(foreach v,$(1),"$(call json_quote,$(v))"))))
metadata_json = \
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
- "supported_devices":[$(call metadata_devices,$(1))], \
+ "metadata_version": "1.1", \
+ "compat_version": "$(call json_quote,$(compat_version))", \
+ $(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
+ $(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
+ [$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
+ "supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
+ $(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
"version": { \
"dist": "$(call json_quote,$(VERSION_DIST))", \
"version": "$(call json_quote,$(VERSION_NUMBER))", \
"revision": "$(call json_quote,$(REVISION))", \
- "board": "$(call json_quote,$(BOARD))" \
+ "target": "$(call json_quote,$(TARGETID))", \
+ "board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
} \
}'
define Build/append-metadata
- $(if $(SUPPORTED_DEVICES),-echo $(call metadata_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
+ $(if $(SUPPORTED_DEVICES),-echo $(call metadata_json) | fwtool -I - $@)
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
kernel2minor -k $@ -r $@.new $(1)
mv $@.new $@
endef
+
+# Convert a raw image into a $1 type image.
+# E.g. | qemu-image vdi
+define Build/qemu-image
+ qemu-img convert -f raw -O $1 $@ $@.new
+ @mv $@.new $@
+endef