$(eval $(call KernelPackage,usb-phy-nop))
-define KernelPackage/usb-phy-qcom-dwc3
- TITLE:=DWC3 USB QCOM PHY driver
- DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
- KCONFIG:= CONFIG_PHY_QCOM_DWC3
- FILES:= \
- $(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-dwc3.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-qcom-dwc3,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-qcom-dwc3/description
- This driver provides support for the integrated DesignWare
- USB3 IP Core within the QCOM SoCs.
-endef
-
-$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
-
-
define KernelPackage/phy-ath79-usb
TITLE:=Support for ATH79 USB PHY
KCONFIG:=CONFIG_PHY_AR7100_USB \
define KernelPackage/usb-dwc2
TITLE:=DWC2 USB controller driver
- DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget +kmod-usb-roles
KCONFIG:= \
CONFIG_USB_PCI=y \
CONFIG_USB_DWC2 \
$(eval $(call KernelPackage,usb-dwc3))
-define KernelPackage/usb-dwc3-of-simple
- TITLE:=DWC3 USB simple OF driver
- DEPENDS:=@LINUX_4_14 @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
- KCONFIG:= CONFIG_USB_DWC3_OF_SIMPLE
- FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-of-simple.ko
- AUTOLOAD:=$(call AutoLoad,53,dwc3-of-simple,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-dwc3-of-simple/description
- This driver provides generic platform glue for the integrated DesignWare
- USB3 IP Core.
-endef
-
-
-$(eval $(call KernelPackage,usb-dwc3-of-simple))
-
-
define KernelPackage/usb-dwc3-qcom
TITLE:=DWC3 Qualcomm USB driver
- DEPENDS:=@(!LINUX_4_14) @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
+ DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
KCONFIG:= CONFIG_USB_DWC3_QCOM
FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
define AddDepends/usb-net
SUBMENU:=$(USB_MENU)
- DEPENDS+=kmod-usb-net $(1)
+ DEPENDS+=+kmod-usb-net $(1)
+endef
+
+
+define KernelPackage/usb-net-aqc111
+ TITLE:=Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE
+ KCONFIG:=CONFIG_USB_NET_AQC111
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/aqc111.ko
+ AUTOLOAD:=$(call AutoProbe,aqc111)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-aqc111/description
+ Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE
endef
+$(eval $(call KernelPackage,usb-net-aqc111))
+
define KernelPackage/usb-net-asix
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
KCONFIG:=CONFIG_USB_RTL8152
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/r8152.ko
AUTOLOAD:=$(call AutoProbe,r8152)
- $(call AddDepends/usb-net)
+ $(call AddDepends/usb-net, +LINUX_5_10:kmod-crypto-hash)
endef
define KernelPackage/usb-net-rtl8152/description
KCONFIG:=CONFIG_USB_NET_CDC_NCM
FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ncm.ko
AUTOLOAD:=$(call AutoProbe,cdc_ncm)
- $(call AddDepends/usb-net)
+ $(call AddDepends/usb-net,+!LINUX_5_4:kmod-usb-net-cdc-ether)
endef
define KernelPackage/usb-net-cdc-ncm/description
$(eval $(call KernelPackage,usb-hid))
+define KernelPackage/usb-hid-cp2112
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Silicon Labs CP2112 HID USB to SMBus Master Bridge
+ KCONFIG:=CONFIG_GPIOLIB=y CONFIG_HID_CP2112
+ DEPENDS:=+kmod-usb-hid +kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/hid/hid-cp2112.ko
+ AUTOLOAD:=$(call AutoProbe,hid-cp2112)
+endef
+
+define KernelPackage/usb-hid-cp2112/description
+ HID device driver which registers as an i2c adapter and gpiochip to expose
+ these functions of the CP2112.
+endef
+
+$(eval $(call KernelPackage,usb-hid-cp2112))
+
+
define KernelPackage/usb-yealink
TITLE:=USB Yealink VOIP phone
DEPENDS:=+kmod-input-evdev
$(eval $(call KernelPackage,usbip-server))
-
define KernelPackage/usb-chipidea
TITLE:=Host and device support for Chipidea controllers
- DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ar71xx||TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop +kmod-usb-roles
KCONFIG:= \
CONFIG_EXTCON \
CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_GENERIC \
CONFIG_USB_CHIPIDEA_HOST=y \
CONFIG_USB_CHIPIDEA_UDC=y \
CONFIG_USB_CHIPIDEA_DEBUG=y
FILES:= \
$(LINUX_DIR)/drivers/extcon/extcon-core.ko \
$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
- $(LINUX_DIR)/drivers/usb/common/ulpi.ko@ge4.18 \
- $(LINUX_DIR)/drivers/usb/roles/roles.ko@ge5.0
+ $(LINUX_DIR)/drivers/usb/common/ulpi.ko
AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usbmon))
-XHCI_MODULES := xhci-hcd xhci-pci xhci-plat-hcd
-ifdef CONFIG_TARGET_ramips_mt7621
- XHCI_MODULES += xhci-mtk
-endif
-XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
-XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
-
define KernelPackage/usb3
TITLE:=Support for USB3 controllers
DEPENDS:= \
+ +kmod-usb-xhci-hcd \
+TARGET_bcm53xx:kmod-usb-bcma \
- +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
+ +TARGET_ramips_mt7621:kmod-usb-xhci-mtk \
+ +(TARGET_apm821xx_nand&&LINUX_5_10):kmod-usb-xhci-pci-renesas
KCONFIG:= \
CONFIG_USB_PCI=y \
- CONFIG_USB_XHCI_HCD \
CONFIG_USB_XHCI_PCI \
- CONFIG_USB_XHCI_PLATFORM \
- CONFIG_USB_XHCI_MTK \
- CONFIG_USB_XHCI_HCD_DEBUGGING=n
+ CONFIG_USB_XHCI_PLATFORM
FILES:= \
- $(XHCI_FILES)
- AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1)
+ $(LINUX_DIR)/drivers/usb/host/xhci-pci.ko \
+ $(LINUX_DIR)/drivers/usb/host/xhci-plat-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-pci xhci-plat-hcd,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-net2280))
+define KernelPackage/usb-roles
+ TITLE:=USB Role Switch Library Module
+ KCONFIG:=CONFIG_USB_ROLE_SWITCH
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/roles/roles.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-roles/description
+ Support for USB Role Switch
+endef
+
+$(eval $(call KernelPackage,usb-roles))
+
+
+define KernelPackage/usb-xhci-hcd
+ TITLE:=xHCI HCD (USB 3.0) support
+ KCONFIG:= \
+ CONFIG_USB_XHCI_HCD \
+ CONFIG_USB_XHCI_HCD_DEBUGGING=n
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-hcd/description
+ The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+ "SuperSpeed" host controller hardware.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-hcd))
+
+
+define KernelPackage/usb-xhci-mtk
+ TITLE:=xHCI support for MediaTek SoCs
+ DEPENDS:=+kmod-usb-xhci-hcd
+ KCONFIG:=CONFIG_USB_XHCI_MTK
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-mtk.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-mtk,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-mtk/description
+ Kernel support for the xHCI host controller found in MediaTek SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-mtk))
+
+
+define KernelPackage/usb-xhci-pci-renesas
+ TITLE:=Support for additional Renesas xHCI controller with firmware
+ DEPENDS:=@LINUX_5_10
+ KCONFIG:=CONFIG_USB_XHCI_PCI_RENESAS
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-pci-renesas.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-pci-renesas,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-pci-renesas/description
+ Kernel support for the Renesas xHCI controller with firmware. Make sure you have
+ the firwmare for the device and installed on your system for this device to work.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-pci-renesas))
+
+
define KernelPackage/chaoskey
SUBMENU:=$(USB_MENU)
TITLE:=Chaoskey hardware RNG support
projects / openwrt / staging / mkresin.git / blobdiff