--- a/nl80211.h
+++ b/nl80211.h
-@@ -2515,6 +2515,9 @@ enum nl80211_commands {
- * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
- * association request when used with NL80211_CMD_NEW_STATION).
+@@ -301,29 +301,6 @@
+ */
+
+ /**
+- * DOC: FILS shared key crypto offload
+- *
+- * This feature is applicable to drivers running in AP mode.
+- *
+- * FILS shared key crypto offload can be advertised by drivers by setting
+- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
+- * FILS shared key crypto offload should be able to encrypt and decrypt
+- * association frames for FILS shared key authentication as per IEEE 802.11ai.
+- * With this capability, for FILS key derivation, drivers depend on userspace.
+- *
+- * After FILS key derivation, userspace shares the FILS AAD details with the
+- * driver and the driver stores the same to use in decryption of association
+- * request and in encryption of association response. The below parameters
+- * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
+- * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
+- * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption
+- * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
+- * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
+- *
+- * Once the association is done, the driver cleans the FILS AAD data.
+- */
+-
+-/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+@@ -1226,12 +1203,6 @@
+ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
+ * has completed
+ *
+- * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
+- * &NL80211_ATTR_MAC - for STA MAC address
+- * &NL80211_ATTR_FILS_KEK - for KEK
+- * &NL80211_ATTR_FILS_NONCES - for FILS Nonces
+- * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
+- *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -1472,8 +1443,6 @@ enum nl80211_commands {
+ NL80211_CMD_COLOR_CHANGE_ABORTED,
+ NL80211_CMD_COLOR_CHANGE_COMPLETED,
+
+- NL80211_CMD_SET_FILS_AAD,
+-
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+@@ -2639,6 +2608,9 @@ enum nl80211_commands {
+ * Mandatory parameter for the transmitting interface to enable MBSSID.
+ * Optional for the non-transmitting interfaces.
*
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2997,6 +3000,8 @@ enum nl80211_attrs {
-
- NL80211_ATTR_HE_6GHZ_CAPABILITY,
+@@ -3145,6 +3117,8 @@ enum nl80211_attrs {
+ NL80211_ATTR_MBSSID_CONFIG,
+ NL80211_ATTR_MBSSID_ELEMS,
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
+@@ -4978,7 +4952,6 @@ enum nl80211_txrate_gi {
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
+ * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
+ * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
+- * @NL80211_BAND_LC: light communication band (placeholder)
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ * since newer kernel versions may support more bands
+ */
+@@ -4988,7 +4961,6 @@ enum nl80211_band {
+ NL80211_BAND_60GHZ,
+ NL80211_BAND_6GHZ,
+ NL80211_BAND_S1GHZ,
+- NL80211_BAND_LC,
+
+ NUM_NL80211_BANDS,
+ };
+@@ -6046,11 +6018,6 @@ enum nl80211_feature_flags {
+ * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
+ * detection and change announcemnts.
+ *
+- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
+- * FILS encryption and decryption for (Re)Association Request and Response
+- * frames. Userspace has to share FILS AAD details to the driver by using
+- * @NL80211_CMD_SET_FILS_AAD.
+- *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+@@ -6116,7 +6083,6 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_SECURE_RTT,
+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ NL80211_EXT_FEATURE_BSS_COLOR,
+- NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+@@ -7424,7 +7390,7 @@ enum nl80211_sar_specs_attrs {
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
+ * to advertise the maximum profile periodicity supported by the driver
+ * if EMA is enabled. Driver should indicate EMA support to the userspace
+- * by setting wiphy->ema_max_profile_periodicity to
++ * by setting wiphy->mbssid_max_ema_profile_periodicity to
+ * a non-zero value.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
+@@ -7443,7 +7409,7 @@ enum nl80211_sar_specs_attrs {
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
+ * Setting this flag is permitted only if the driver advertises EMA support
+- * by setting wiphy->ema_max_profile_periodicity to non-zero.
++ * by setting wiphy->mbssid_max_ema_profile_periodicity to non-zero.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
+--- a/info.c
++++ b/info.c
+@@ -701,7 +701,6 @@ broken_combination:
+ ext_feat_print(tb, OPERATING_CHANNEL_VALIDATION, "Operating Channel Validation (OCV) support");
+ ext_feat_print(tb, 4WAY_HANDSHAKE_AP_PSK, "AP mode PSK offload support");
+ ext_feat_print(tb, BSS_COLOR, "BSS coloring support");
+- ext_feat_print(tb, FILS_CRYPTO_OFFLOAD, "FILS crypto offload");
+ }
+
+ if (tb_msg[NL80211_ATTR_COALESCE_RULE]) {
projects / openwrt / openwrt.git / blobdiff