wireguard-tools: add tunlink option for hostroute

[openwrt/openwrt.git] / target / linux / ar71xx / base-files / etc / hotplug.d / firmware / 10-ath9k-eeprom

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b5f0588863293820543a7c4a0e98f1d1de580c53..8fe57c87cc62070888edaec3e38498cfefc98e70 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -1,5 +1,10 @@
 #!/bin/sh
 
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
 ath9k_eeprom_die() {
        echo "ath9k eeprom: " "$*"
        exit 1
@@ -7,42 +12,105 @@ ath9k_eeprom_die() {
 
 ath9k_eeprom_extract() {
        local part=$1
-       local offset=$2
-       local count=$3
+       local offset=$(($2))
+       local count=$(($3))
        local mtd
 
        mtd=$(find_mtd_chardev $part)
        [ -n "$mtd" ] || \
                ath9k_eeprom_die "no mtd device found for partition $part"
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
                ath9k_eeprom_die "failed to extract from $mtd"
 }
 
+ath9k_ubi_eeprom_extract() {
+       local part=$1
+       local offset=$(($2))
+       local count=$(($3))
+       local ubidev=$(nand_find_ubi $CI_UBIPART)
+       local ubi
+
+       ubi=$(nand_find_volume $ubidev $part)
+       [ -n "$ubi" ] || \
+               ath9k_eeprom_die "no UBI volume found for $part"
+
+       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+               ath9k_eeprom_die "failed to extract from $ubi"
+}
+
+ath9k_eeprom_extract_reverse() {
+       local part=$1
+       local offset=$2
+       local count=$(($3))
+       local mtd
+       local reversed
+       local caldata
+
+       mtd=$(find_mtd_chardev "$part")
+       reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
+
+       for byte in $reversed; do
+               caldata="\x${byte}${caldata}"
+       done
+
+       printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+}
+
 ath9k_patch_firmware_mac() {
        local mac=$1
 
        [ -z "$mac" ] && return
 
-       macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
+       macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=2 count=1
 }
 
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/ar71xx.sh
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$FIRMWARE" in
 "soc_wmac.eeprom")
        case $board in
+       c-55|\
+       c-60)
+               ath9k_eeprom_extract "art" 0x1000 0x800
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+               ;;
+       fritz4020|\
+       fritz450e)
+               ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+               ;;
+       mr18)
+               . /lib/upgrade/nand.sh
+
+               if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+                       ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
+               else
+                       ath9k_eeprom_extract "odm-caldata" 0x1000 0x800
+               fi
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1)
+               ;;
        r6100 | \
        wndr3700v4 | \
        wndr4300)
-               ath9k_eeprom_extract "caldata" 4096 2048
-               ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0)
+               ath9k_eeprom_extract "caldata" 0x1000 0x800
+               ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0)
+               ;;
+       rambutan)
+               ath9k_eeprom_extract "art" 0x1000 0x800
+               ;;
+       wlr8100)
+               ath9k_eeprom_extract "art" 0x1000 0x800
+               ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr")
+               ;;
+       z1)
+               . /lib/upgrade/nand.sh
+
+               if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+                       ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
+               else
+                       ath9k_eeprom_extract "origcaldata" 0x1000 0x800
+               fi
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
                ;;
        *)
                ath9k_eeprom_die "board $board is not supported yet"
@@ -52,10 +120,55 @@ case "$FIRMWARE" in
 
 "pci_wmac0.eeprom")
        case $board in
+       c-55)
+               ath9k_eeprom_extract "art" 0x5000 0x800
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+               ;;
+       fritz300e)
+               ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
+               ;;
+       mr18)
+               . /lib/upgrade/nand.sh
+
+               if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+                       ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800
+               else
+                       ath9k_eeprom_extract "odm-caldata" 0x5000 0x800
+               fi
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
+               ;;
        wndr3700v4 | \
        wndr4300)
-               ath9k_eeprom_extract "caldata" 20480 2048
-               ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 12)
+               ath9k_eeprom_extract "caldata" 0x5000 0x800
+               ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc)
+               ;;
+       z1)
+               . /lib/upgrade/nand.sh
+
+               if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+                       ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000
+               else
+                       ath9k_eeprom_extract "origcaldata" 0x15000 0x1000
+               fi
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
+               ;;
+       *)
+               ath9k_eeprom_die "board $board is not supported yet"
+               ;;
+       esac
+       ;;
+
+"pci_wmac1.eeprom")
+       case $board in
+       mr18)
+               . /lib/upgrade/nand.sh
+
+               if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+                       ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800
+               else
+                       ath9k_eeprom_extract "odm-caldata" 0x9000 0x800
+               fi
+               ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
                ;;
        *)
                ath9k_eeprom_die "board $board is not supported yet"