#include <linux/init.h>
#include <linux/bitops.h>
-#include <linux/input.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#include <linux/spi/vsc7385.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pcf857x.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define PB44_PCF8757_VSC7395_CS 0
+#define PB44_PCF8757_STEREO_CS 1
+#define PB44_PCF8757_SLIC_CS0 2
+#define PB44_PCF8757_SLIC_TEST 3
+#define PB44_PCF8757_SLIC_INT0 4
+#define PB44_PCF8757_SLIC_INT1 5
+#define PB44_PCF8757_SW_RESET 6
+#define PB44_PCF8757_SW_JUMP 8
+#define PB44_PCF8757_LED_JUMP1 9
+#define PB44_PCF8757_LED_JUMP2 10
+#define PB44_PCF8757_TP24 11
+#define PB44_PCF8757_TP25 12
+#define PB44_PCF8757_TP26 13
+#define PB44_PCF8757_TP27 14
+#define PB44_PCF8757_TP28 15
+
+#define PB44_GPIO_I2C_SCL 0
+#define PB44_GPIO_I2C_SDA 1
+
+#define PB44_GPIO_EXP_BASE 16
+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_RESET)
+#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_JUMP)
+#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1)
+#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2)
+
+static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
+ .sda_pin = PB44_GPIO_I2C_SDA,
+ .scl_pin = PB44_GPIO_I2C_SCL,
+};
+
+static struct platform_device pb44_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &pb44_i2c_gpio_data,
+ }
+};
+
+static struct pcf857x_platform_data pb44_pcf857x_data = {
+ .gpio_base = PB44_GPIO_EXP_BASE,
+};
+
+static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8575", 0x20),
+ .platform_data = &pb44_pcf857x_data,
+ },
+};
+
+static struct gpio_led pb44_leds_gpio[] __initdata = {
+ {
+ .name = "pb44:amber:jump1",
+ .gpio = PB44_GPIO_LED_JUMP1,
+ .active_low = 1,
+ }, {
+ .name = "pb44:green:jump2",
+ .gpio = PB44_GPIO_LED_JUMP2,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_button pb44_gpio_buttons[] __initdata = {
+ {
+ .desc = "soft_reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = PB44_GPIO_SW_RESET,
+ .active_low = 1,
+ } , {
+ .desc = "jumpstart",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = PB44_GPIO_SW_JUMP,
+ .active_low = 1,
+ }
+};
+
+static void pb44_vsc7395_reset(void)
+{
+ ar71xx_device_stop(RESET_MODULE_GE1_PHY);
+ udelay(10);
+ ar71xx_device_start(RESET_MODULE_GE1_PHY);
+ mdelay(50);
+}
+
+static struct vsc7385_platform_data pb44_vsc7395_data = {
+ .reset = pb44_vsc7395_reset,
+ .ucode_name = "vsc7395_ucode_pb44.bin",
+ .mac_cfg = {
+ .tx_ipg = 6,
+ .bit2 = 1,
+ .clk_sel = 0,
+ },
+};
static struct spi_board_info pb44_spi_info[] = {
{
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
- }
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-vsc7385",
+ .platform_data = &pb44_vsc7395_data,
+ .controller_data = (void *) PB44_GPIO_VSC7395_CS,
+ },
};
-static struct ar71xx_pci_irq pb44_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 2,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
- }
+static struct resource pb44_spi_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct ar71xx_spi_platform_data pb44_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 2,
+};
+
+static struct platform_device pb44_spi_device = {
+ .name = "pb44-spi",
+ .id = -1,
+ .resource = pb44_spi_resources,
+ .num_resources = ARRAY_SIZE(pb44_spi_resources),
+ .dev = {
+ .platform_data = &pb44_spi_data,
+ },
};
#define PB44_WAN_PHYMASK BIT(0)
static void __init pb44_init(void)
{
- ar71xx_add_device_spi(NULL, pb44_spi_info,
- ARRAY_SIZE(pb44_spi_info));
-
ar71xx_add_device_mdio(~PB44_MDIO_PHYMASK);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = PB44_LAN_PHYMASK;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_pll_data.pll_1000 = 0x110000;
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
- ar71xx_pci_init(ARRAY_SIZE(pb44_pci_irqs), pb44_pci_irqs);
+ pb42_pci_init();
+
+ i2c_register_board_info(0, pb44_i2c_board_info,
+ ARRAY_SIZE(pb44_i2c_board_info));
+
+ platform_device_register(&pb44_i2c_gpio_device);
+
+ spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info));
+ platform_device_register(&pb44_spi_device);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
+ pb44_leds_gpio);
- /* TODO: GPIO LEDs & buttons */
+ ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(pb44_gpio_buttons),
+ pb44_gpio_buttons);
}
MIPS_MACHINE(AR71XX_MACH_PB44, "Atheros PB44", pb44_init);