/*
- * TP-LINK CPE210/220/510/520 board support
+ * TP-LINK CPE210/210 v2/220/510/520 board support
*
* Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ * Copyright (C) 2017 Robert Marko <robimarko@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
#define CPE510_GPIO_LED_L3 15
#define CPE510_GPIO_LED_L4 16
+/* All LEDs/button except for link4 are the same for CPE and WBS series */
+#define WBS510_GPIO_LED_L4 2
+
#define CPE510_GPIO_EXTERNAL_LNA0 18
#define CPE510_GPIO_EXTERNAL_LNA1 19
#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */
#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL)
+/* CPE210 v2 reset GPIO */
+#define CPE210_V2_GPIO_BTN_RESET 17
static struct gpio_led cpe510_leds_gpio[] __initdata = {
{
},
};
+static struct gpio_led wbs510_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan0",
+ .gpio = CPE510_GPIO_LED_LAN0,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan1",
+ .gpio = CPE510_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link1",
+ .gpio = CPE510_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link2",
+ .gpio = CPE510_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link3",
+ .gpio = CPE510_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link4",
+ .gpio = WBS510_GPIO_LED_L4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led cpe210_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan0",
+ .gpio = CPE510_GPIO_LED_LAN0,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link1",
+ .gpio = CPE510_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link2",
+ .gpio = CPE510_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link3",
+ .gpio = CPE510_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link4",
+ .gpio = CPE510_GPIO_LED_L4,
+ .active_low = 1,
+ },
+};
+
static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
{
.desc = "Reset button",
}
};
+static struct gpio_keys_button cpe210_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CPE210_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
-static void __init cpe510_setup(void)
+static void __init cpe_setup(u8 *mac)
{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
/* Disable JTAG, enabling GPIOs 0-3 */
/* Configure OBS4 line, for GPIO 4*/
ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
AR934X_GPIO_FUNC_CLK_OBS4_EN);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
- cpe510_leds_gpio);
-
ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cpe510_gpio_keys),
cpe510_gpio_keys);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_register_eth(1);
+}
+
+
+static void __init cpe210_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
+ cpe510_leds_gpio);
+
+ cpe_setup(mac);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init cpe510_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
+ cpe510_leds_gpio);
+
+ cpe_setup(mac);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init wbs_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wbs510_leds_gpio),
+ wbs510_leds_gpio);
+
+ cpe_setup(mac);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init cpe210_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio),
+ cpe210_v2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cpe210_v2_gpio_keys),
+ cpe210_v2_gpio_keys);
+ ath79_register_m25p80(NULL);
+ ath79_register_mdio(0, 0x0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
ath79_register_wmac(ee, mac);
}
-MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
+static void __init cpe510_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio),
+ cpe210_v2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cpe510_gpio_keys),
+ cpe510_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_mdio(1, 0x0);
+
+ /* LAN port */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220",
+ cpe210_setup);
+
+MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2",
+ cpe210_v2_setup);
+
+MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3",
+ cpe210_v2_setup);
+
+MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
cpe510_setup);
+
+MIPS_MACHINE(ATH79_MACH_CPE510_V2, "CPE510V2", "TP-LINK CPE510 v2",
+ cpe510_v2_setup);
+
+MIPS_MACHINE(ATH79_MACH_WBS210, "WBS210", "TP-LINK WBS210",
+ wbs_setup);
+
+MIPS_MACHINE(ATH79_MACH_WBS510, "WBS510", "TP-LINK WBS510",
+ wbs_setup);
projects / openwrt / openwrt.git / blobdiff