rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
+# $(1): rootfs type.
+# $(2): board name.
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
endef
SINGLE_PROFILES:=
+# $(1) : name of image build method to be used, e.g., TPLINK-LZMA, AthLzma.
+# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
+# $(3) : name of the profile to be defined.
+# $(4) : board name.
+# $(5)~$(7) : arguments for $(mkcmdline)
+# board=$(1) console=$(2),$(3)
+# $(8)~$(14): extra arguments.
define SingleProfile
+ # $(1): action name, e.g. loader, buildkernel, squashfs, etc.
define Image/Build/Profile/$(3)
- $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12))
+ $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
endef
SINGLE_PROFILES += $(3)
endef
+# $(1), name of the MultiProfile to be added.
+# $(2), name of Profiles to be included in the MultiProfile.
define MultiProfile
define Image/Build/Profile/$(1)
$(foreach p,$(2),
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
+# $(1): input file.
+# $(2): output file.
+# $(3): extra arguments for lzma.
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
endef
cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
endef
+# $(1): board name.
+# $(2): kernel command line.
+# $(3): extra argumetns for lzma.
+# $(4): name suffix, e.g. "-initramfs".
define PatchKernelLzma
cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
endef
ifneq ($(SUBTARGET),mikrotik)
+# $(1): compression method of the data.
+# $(2): extra arguments.
+# $(3): input data file.
+# $(4): output file.
define MkuImage
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(3) $(4)
endef
+# $(1): board name.
+# $(2): kernel command line.
+# $(3): extra arguments for lzma.
+# $(4): name suffix, e.g. "-initramfs".
+# $(5): extra arguments for mkimage.
define MkuImageLzma
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
$(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
endef
endif
+# $(1): name of the 1st file.
+# $(2): size limit of the 1st file if it is greater than 262144, or
+# the erase size of the flash if it is greater than zero and less
+# than 262144
+# $(3): name of the 2nd file.
+# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
+# it is the size limit of the output file
+# $(5): name of the output file.
+# $(6): padding size.
define CatFiles
if [ $(2) -eq 0 ]; then \
filename="$(3)"; fstype=$$$${filename##*\.}; \
fi; fi
endef
+# $(1): rootfs type.
+# $(2): board name.
+# $(3): kernel image size limit.
+# $(4): rootfs image size limit.
+# $(5): padding argument for padjffs2.
Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem)
+zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubiroot)
+
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
# $(6): Board name (upper caps)
# $(7): firmware region code (not used yet)
# $(8): DNI Hardware version
+# $(9): suffix of the configuration file for ubinize
define Image/Build/NetgearNAND
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
- $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+ $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
endif
+define Image/Build/ZyXELNAND/buildkernel
+ $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
+ $(call MkuImageLzma,$(2),$(3) $(5) $(6))
+ mkdir -p $(KDIR_TMP)/$(2)/image/boot
+ cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
+ -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
+ -d $(KDIR_TMP)/$(2)/image \
+ 2>&1 1>/dev/null | awk '/^.+$$$$/'
+ -rm -rf $(KDIR_TMP)/$(2)
+endef
+
+define Image/Build/ZyXELNAND
+ if [ "$(1)" != "squashfs" ]; then \
+ echo Only squashfs is supported; \
+ return 0; \
+ fi
+ $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
+ $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+ $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
+ $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
+ echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
+ $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+ ( \
+ dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+ dd if=$(KDIR_TMP)/$(2)-root.ubi \
+ ) > $(imageraw)
+ dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
+ bs=128k conv=sync
+ ( \
+ dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+ dd if=$(KDIR)/root.$(1) bs=128k conv=sync \
+ ) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin
+endef
+
+
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
define Image/Build/OpenMesh
define Jffs2Template
define Image/Build/Template/$(1)/jffs2-$(2)
- $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
endef
+# $(1): template name to be defined.
+# $(2): squashfs suffix to be used.
+# $(3): jffs2 suffix to be used.
define BuildTemplate
+ # $(1) : name of build method.
+ # $(2) : board name.
+ # $(3) : kernel command line.
+ # $(4)~$(8): extra arguments.
define Image/Build/Template/$(1)/initramfs
- $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/loader
- $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/buildkernel
- $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/squashfs
- $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
$(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs)))))
endef
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700V4,"",-H 29763948+128+128,wndr4300))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
+
+$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),ubi.mtd=ubiroot mem=256M))
+
+$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
endif # ifeq ($(SUBTARGET),nand)
$(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader)
endef
+# $(1): filesystem type.
define Image/Build
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
$(call Image/Build/Profile/$(IMAGE_PROFILE),$(1))