# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -$(STAGING_DIR_HOST)/bin/mkfwimage \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@
# all UBNT XM device expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
- dd if=$@ of=$@.old1 bs=1024k count=1
- dd if=$@ of=$@.old2 bs=1024k skip=1
+ -[ -f $@ ] && ( \
+ dd if=$@ of=$@.old1 bs=1024k count=1; \
+ dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
- -o $@
- rm $@.old1 $@.old2
+ -o $@; \
+ rm $@.old1 $@.old2 )
endef
define Build/mkubntimage2
- $(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$@ \
-o $@.new
@mv $@.new $@
UBNT_CHIP := ar7240
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-xw
UBNT_CHIP := ar934x
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-bz
UBNT_CHIP := ar934x
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-unifiac
IMAGE_SIZE := 7744k
MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/rw2458n
BOARDNAME := UBNT-UF-AC-LITE
endef
+define Device/ubnt-unifiac-mesh
+ $(Device/ubnt-unifiac-lite)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
+endef
+
define Device/ubnt-unifiac-pro
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
BOARDNAME := UBNT-U20
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-mesh ubnt-unifiac-pro ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
BOARDNAME := UBNT-AGWP
UBNT_TYPE := AirGWP
UBNT_CHIP := ar934x
- CONSOLE = ttyS0,115200
endef
TARGET_DEVICES += ubnt-air-gateway-pro
endef
define Device/ubnt-rs
-$(Device/ubnt-routerstation)
+ $(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation
BOARDNAME := UBNT-RS
- DEVICE_PROFILE := Madwifi UBNT UBNTRS
+ DEVICE_PROFILE := UBNT UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
endef
define Device/ubnt-rspro
-$(Device/ubnt-routerstation)
+ $(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation Pro
BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
+ DEVICE_PROFILE := UBNT UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
define Device/ubnt-ls-sr71
-$(Device/ubnt-routerstation)
+ $(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti LS-SR71
BOARDNAME := UBNT-LS-SR71
- DEVICE_PROFILE := Madwifi UBNT
+ DEVICE_PROFILE := UBNT
UBNT_BOARD := LS-SR71
UBNT_TYPE := LS-SR71
UBNT_CHIP := ar7100
DEVICE_PROFILE := UBNT UAPPRO
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2
endef
define Device/ubnt-unifi-outdoor-plus
-$(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Pro
+ $(Device/ubnt-uap-pro)
+ DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
UBNT_CHIP := ar7240
BOARDNAME := UBNT-UOP
DEVICE_PROFILE := UBNT