at91: add SAMA5D3-Xplained board UBI parameters to makefile.

[openwrt/openwrt.git] / target / linux / at91 / image / Config.in

diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in
index 6607f6c3259ecb3250e9d7fc3b7b287974460eef..54a501dcb30d9ccf97dc8118fb4532808d35761a 100644 (file)
--- a/target/linux/at91/image/Config.in
+++ b/target/linux/at91/image/Config.in
@@ -1,35 +1,37 @@
 config AT91_DFBOOT
        bool "Build dataflashboot loader"
-       depends LINUX_2_6_AT91
-       default y
+       depends on TARGET_at91
+       default n
 
 config AT91_UBOOT
-       bool "Build u-boot loader"
-       depends LINUX_2_6_AT91
-       default y
+       bool "Build U-Boot bootloader"
+       depends on TARGET_at91
+       default n
 
 config UBOOT_TARGET
-       string "U-Boot Board Configuration"
-       depends LINUX_2_6_AT91
-       depends AT91_UBOOT
-       default "vlink"
+       string "U-Boot target board"
+       depends on AT91_UBOOT
+       default "netusg20"
        help
          For all supported boards there are ready-to-use default
                configurations available; just type "<board_name>".
 
 config UBOOT_IPADDR
        string "IP Address for U-Boot"
-       depends LINUX_2_6_AT91
-       depends AT91_UBOOT
+       depends on AT91_UBOOT
        default "192.168.0.178"
        help
          IP address of device to be used in U-Boot
 
 config UBOOT_SERVERIP
        string "IP Address of TFTP server"
-       depends LINUX_2_6_AT91
-       depends AT91_UBOOT
+       depends on AT91_UBOOT
        default "192.168.0.232"
        help
          IP address of TFTP server for U-Boot
 
+config FLEXIBITY_ROOT
+       bool "Build Flexibity RootFS (with embedded kernel)"
+       depends on TARGET_at91_flexibity
+       default n
+