ath79: add missing clock name strings in SoC dtsi

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9331_alfa-network_ap121f.dts

diff --git a/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts b/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
index 971d158faf94be4924ab5f69c9dd32dc5d6b67e4..0465109bc3a3a55d69a3d70615992db4e32ec92e 100644 (file)
--- a/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
+++ b/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
@@ -1,138 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
+#include "ar9331_alfa-network_ap121f.dtsi"
 
 / {
        model = "ALFA Network AP121F";
        compatible = "alfa-network,ap121f", "qca,ar9331";
-
-       aliases {
-               label-mac-device = &wmac;
-               led-boot = &led_vpn;
-               led-failsafe = &led_vpn;
-               led-upgrade = &led_vpn;
-               serial0 = &uart;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               switch {
-                       label = "switch";
-                       linux,code = <BTN_0>;
-                       gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan {
-                       label = "ap121f:green:lan";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-               };
-
-               led_vpn: vpn {
-                       label = "ap121f:green:vpn";
-                       gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
-               };
-
-               wlan {
-                       label = "ap121f:green:wlan";
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "phy0tpt";
-               };
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       mtd-mac-address = <&art 0x0>;
-
-       gmac-config {
-               device = <&gmac>;
-               switch-phy-addr-swap = <0>;
-               switch-phy-swap = <0>;
-       };
-};
-
-&eth1 {
-       status = "okay";
-
-       compatible = "syscon", "simple-mfd";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x030000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x030000 0x010000>;
-                       };
-
-                       art: partition@40000 {
-                               label = "art";
-                               reg = <0x040000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x050000 0xfb0000>;
-                       };
-               };
-       };
-};
-
-&uart {
-       status = "okay";
 };
 
 &usb {
-       status = "okay";
        dr_mode = "host";
 };
-
-&usb_phy {
-       status = "okay";
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-};