ath79: TP-Link EAP245 v3: convert radios to nvmem-cells
[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9331_tplink_tl-wr741nd-v4.dtsi
index abaaca87559579fa8a2c4aa07472ff70c2aef92c..b74b8251ce5c0a3c86b1b92f6f59d3c94b9ee605 100644 (file)
@@ -1,26 +1,24 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "ar9331.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar9331.dtsi"
-
 / {
        compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
        model = "TP-Link TL-WR741N/ND v4";
 
        aliases {
-               serial0 = &uart;
-               led-boot = &system;
-               led-failsafe = &system;
-               led-running = &system;
-               led-upgrade = &system;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+               label-mac-device = &wmac;
        };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+       keys {
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
+
                pinctrl-names = "default";
-               pinctrl-0 = <&switch_led_pins>;
+               pinctrl-0 = <&switch_led_disable_pins>;
 
                lan1 {
-                       label = "tp-link:green:lan1";
+                       label = "green:lan1";
                        gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
                };
 
                lan2 {
-                       label = "tp-link:green:lan2";
+                       label = "green:lan2";
                        gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
                };
 
                lan3 {
-                       label = "tp-link:green:lan3";
+                       label = "green:lan3";
                        gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
                };
 
                lan4 {
-                       label = "tp-link:green:lan4";
+                       label = "green:lan4";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                };
 
                qss {
-                       label = "tp-link:green:qss";
+                       label = "green:qss";
                        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
                };
 
-               system: system {
-                       label = "tp-link:green:system";
-                       gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+               led_system: system {
+                       label = "green:system";
+                       gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
                };
 
                wan {
-                       label = "tp-link:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
                };
 
                wlan {
-                       label = "tp-link:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "phy0tpt";
                };
@@ -87,7 +86,6 @@
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
 &eth0 {
        status = "okay";
 
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mtd-mac-address-increment = <1>;
+       nvmem-cells = <&macaddr_uboot_1fc00>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
 
        gmac-config {
                device = <&gmac>;
 &eth1 {
        status = "okay";
 
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mtd-mac-address-increment = <(-1)>;
+       nvmem-cells = <&macaddr_uboot_1fc00>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <(-1)>;
 };
 
-&gpio {
+&wmac {
        status = "okay";
-};
 
-&uart {
-       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+       nvmem-cells = <&macaddr_uboot_1fc00>;
+       nvmem-cell-names = "mac-address";
 };
 
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&uboot 0x1fc00>;
+&uboot {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_uboot_1fc00: macaddr@1fc00 {
+               reg = <0x1fc00 0x6>;
+       };
 };