ath79: create common DTSI for Senao qca955x APs

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9331_tplink_tl-wr741nd-v4.dtsi

diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
index 9d8c1a022e82c23019b715da0faa4993f9e5e223..e460e4cd2370d5d2b1877bfabb47e597a9e15074 100644 (file)
--- a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
@@ -1,25 +1,24 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "ar9331.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar9331.dtsi"
-
 / {
        compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
        model = "TP-Link TL-WR741N/ND v4";
 
        aliases {
-               serial0 = &uart;
-               led-status = &led_system;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+               label-mac-device = &wmac;
        };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
+       keys {
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
@@ -36,50 +35,50 @@
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
+
                pinctrl-names = "default";
-               pinctrl-0 = <&switch_led_pins>;
+               pinctrl-0 = <&switch_led_disable_pins>;
 
                lan1 {
-                       label = "tp-link:green:lan1";
+                       label = "green:lan1";
                        gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
                };
 
                lan2 {
-                       label = "tp-link:green:lan2";
+                       label = "green:lan2";
                        gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
                };
 
                lan3 {
-                       label = "tp-link:green:lan3";
+                       label = "green:lan3";
                        gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
                };
 
                lan4 {
-                       label = "tp-link:green:lan4";
+                       label = "green:lan4";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                };
 
                qss {
-                       label = "tp-link:green:qss";
+                       label = "green:qss";
                        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
                };
 
                led_system: system {
-                       label = "tp-link:green:system";
-                       gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+                       label = "green:system";
+                       gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
                };
 
                wan {
-                       label = "tp-link:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
                };
 
                wlan {
-                       label = "tp-link:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
        };
@@ -87,11 +86,8 @@
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;
@@ -108,6 +104,7 @@
                        };
 
                        firmware: partition@20000 {
+                               compatible = "tplink,firmware";
                                reg = <0x20000 0x3d0000>;
                                label = "firmware";
                        };
@@ -142,16 +139,9 @@
        mtd-mac-address-increment = <(-1)>;
 };
 
-&gpio {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
 &wmac {
        status = "okay";
+
        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&uboot 0x1fc00>;
 };