// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9341.dtsi"
+#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-WR842N/ND v2";
compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
- aliases {
- serial0 = &uart;
- led-boot = &system;
- led-failsafe = &system;
- led-running = &system;
- led-upgrade = &system;
- };
-
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&jtag_disable_pins>;
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
+ compatible = "gpio-keys";
rfkill {
label = "WiFi";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
- };
-
- leds {
- compatible = "gpio-leds";
-
- system: power {
- label = "tp-link:green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "tp-link:green:wan";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- };
- lan1 {
- label = "tp-link:green:lan1";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "tp-link:green:lan2";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "tp-link:green:lan3";
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "tp-link:green:lan4";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "tp-link:green:usb";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
};
};
};
};
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
};
-&gpio {
+&spi {
status = "okay";
-};
-&spi {
num-cs = <1>;
- status = "okay";
-
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
status = "okay";
};
-ð0 {
- status = "okay";
-
- phy-handle = <&swphy0>;
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-1)>;
-};
-
ð1 {
- status = "okay";
-
phy-handle = <&swphy4>;
- mtd-mac-address = <&uboot 0x1fc00>;
- phy-mode = "gmii";
- pll-data = <0x06000000 0x00000101 0x00001616>;
-
- gmac-config {
- device = <&gmac>;
- switch-phy-swap = <1>;
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
};