ath79: add support for OpenMesh OM2P-HS v3

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_comfast_cf-e120a-v3.dts

diff --git a/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts b/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts
index 0bbde9ebfd1f10e79ac4f75691667b325bfd536d..11cc2dadfdddb0e54d138e0584692bc96611f867 100644 (file)
--- a/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts
+++ b/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts
@@ -24,38 +24,38 @@
                pinctrl-0 = <&led_rssimediumhigh_pin>;
 
                wan {
-                       label = "cf-e120a-v3:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "cf-e120a-v3:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "cf-e120a-v3:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
                rssilow {
-                       label = "cf-e120a-v3:red:rssilow";
+                       label = "red:rssilow";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                rssimediumlow {
-                       label = "cf-e120a-v3:red:rssimediumlow";
+                       label = "red:rssimediumlow";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                rssimediumhigh {
-                       label = "cf-e120a-v3:green:rssimediumhigh";
+                       label = "green:rssimediumhigh";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
 
                led_rssihigh: rssihigh {
-                       label = "cf-e120a-v3:green:rssihigh";
+                       label = "green:rssihigh";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                };
        };
@@ -81,8 +81,6 @@
 &spi {
        status = "okay";
 
-       num-cs = <1>;
-
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;