// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include "ar9344_netgear_wndr.dtsi"
+#include "ar9344_netgear_wndr_wan.dtsi"
+#include "ar9344_netgear_wndr_usb.dtsi"
/ {
compatible = "netgear,wndr4300", "qca,ar9344";
model = "Netgear WNDR4300";
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-boot = &led_power_amber;
- led-failsafe = &led_power_amber;
- led-running = &led_power_green;
- led-upgrade = &led_power_amber;
- label-mac-device = ð0;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- };
-
- rfkill {
- label = "rfkill";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-names = "default";
- pinctrl-0 = <&enable_gpio_11>;
-
- led_power_green: power_green {
- label = "netgear:green:power";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- led_power_amber: power_amber {
- label = "netgear:amber:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wan_green {
- label = "netgear:green:wan";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- wan_amber {
- label = "netgear:amber:wan";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g_green {
- label = "netgear:green:wlan2g";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g_blue {
- label = "netgear:blue:wlan5g";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wps_green {
- label = "netgear:green:wps";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- wps_amber {
- label = "netgear:amber:wps";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
-
- usb_green {
- label = "netgear:green:usb";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
- };
-};
-
-&pinmux {
- enable_gpio_11: pinmux_enable_gpio_11 {
- pinctrl-single,bits = <0x8 0x0 0xff000000>;
- };
-};
-
-&nand {
- status = "okay";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x40000 0x40000>;
- };
-
- art: partition@80000 {
- label = "caldata";
- reg = <0x80000 0x40000>;
- read-only;
- };
-
- partition@c0000 {
- label = "pot";
- reg = <0xc0000 0x80000>;
- };
-
- partition@140000 {
- label = "language";
- reg = <0x140000 0x200000>;
- };
-
- partition@340000 {
- label = "config";
- reg = <0x340000 0x80000>;
- };
-
- partition@3c0000 {
- label = "traffic_meter";
- reg = <0x3c0000 0x300000>;
- };
-
- kernel@6c0000 {
- label = "kernel";
- reg = <0x6c0000 0x200000>;
- };
-
- ubi@8c0000 {
- label = "ubi";
- reg = <0x8c0000 0x1700000>;
- };
-
- partition@6c0000 {
- label = "firmware";
- reg = <0x6c0000 0x1900000>;
- compatible = "netgear,uimage";
- };
-
- partition@1fc0000 {
- label = "caldata_backup";
- reg = <0x1fc0000 0x40000>;
- read-only;
- };
-
- partition@2000000 {
- label = "reserved";
- reg = <0x2000000 0x6000000>;
- read-only;
- };
- };
-};
-
-&ref {
- clock-frequency = <40000000>;
-};
-
-&builtin_switch {
- resets = <&rst 8>, <&rst 12>;
- reset-names = "switch", "switch-analog";
-};
-
-&mdio0 {
- status = "okay";
-
- phy-mask = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- qca,mib-poll-interval = <500>;
-
- qca,ar8327-initvals = <
- 0x04 0x07600000
- 0x0c 0x01000000
- 0x10 0xc1000000
- 0x50 0xcc35cc35
- 0x54 0xcb37cb37
- 0x58 0x00000000
- 0x5c 0x00f3cf00
- 0x7c 0x0000007e
- 0x94 0x0000007e
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- /* default for ar934x, except for 1000M */
- pll-data = <0x06000000 0x00000101 0x00001616>;
-
- mtd-mac-address = <&art 0x0>;
-
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
-};
-
-&gpio {
- status = "okay";
-
- lna0 {
- gpio-hog;
- line-name = "netgear:ext:lna0";
- gpios = <18 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-
- lna1 {
- gpio-hog;
- line-name = "netgear:ext:lna1";
- gpios = <19 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
- qca,no-eeprom;
-};
-
-&pcie {
- status = "okay";
-
- ath9k: wifi@0,0 {
- compatible = "pci168c,0033";
- reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&art 0xc>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
-
- usb_power {
- gpio-hog;
- line-name = "netgear:power:usb";
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&uart {
- status = "okay";
};
projects / openwrt / openwrt.git / blobdiff