ath79: fix nanobeam ac ethernet interface

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_ocedo_raccoon.dts

diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
index eb7219b6f9d79635ffc0fc1f1dff76203d10df6a..443f0c67248fca5fe333c500e4b1eb9ef2e1d85f 100644 (file)
--- a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
+++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
@@ -1,11 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "ar9344.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar9344.dtsi"
-
 / {
        model = "OCEDO Raccoon";
        compatible = "ocedo,raccoon", "qca,ar9344";
@@ -15,30 +14,29 @@
        };
 
        aliases {
-               led-boot = &system;
-               led-failsafe = &system;
-               led-running = &system;
-               led-upgrade = &system;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
        };
 
        leds {
                compatible = "gpio-leds";
 
                power {
-                       label = "raccoon:green:power";
+                       label = "green:power";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                wlan2g {
-                       label = "raccoon:yellow:wlan24";
+                       label = "yellow:wlan24";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
 
-               system: system {
-                       label = "raccoon:blue:sys";
+               led_system: system {
+                       label = "blue:sys";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                };
        };
@@ -47,16 +45,14 @@
                compatible = "gpio-leds";
 
                wlan5g {
-                       label = "raccoon:red:wlan5";
+                       label = "red:wlan5";
                        gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy1tpt";
                };
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
 
                reset {
                        linux,code = <KEY_RESTART>;
@@ -74,15 +70,11 @@
        status = "okay";
 };
 
-&gpio {
+&spi {
        status = "okay";
-};
 
-&spi {
        num-cs = <1>;
 
-       status = "okay";
-
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
@@ -164,18 +156,16 @@
 
        phy0: ethernet-phy@0 {
                reg = <0>;
-               phy-mode = "rgmii";
        };
 };
 
 &eth0 {
        status = "okay";
 
-       /* default for ar934x, except for 1000M */
-       pll-data = <0x06000000 0x00000101 0x00001616>;
+       pll-data = <0x06000000 0x00000101 0x00001313>;
 
        mtd-mac-address = <&art 0x0>;
 
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
        phy-handle = <&phy0>;
 };