// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "qca9557.dtsi"
+#include "qca9556_avm_fritz-repeater.dtsi"
/ {
compatible = "avm,fritz1750e", "qca,qca9557";
model = "AVM FRITZ!WLAN Repeater 1750E";
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- };
- };
};
&pcie0 {
status = "okay";
};
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "urlader";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "avm,eva-firmware";
- label = "firmware";
- reg = <0x20000 0xee0000>;
- };
-
- partition@f00000 {
- label = "tffs (1)";
- reg = <0xf00000 0x80000>;
- read-only;
- };
-
- partition@f80000 {
- label = "tffs (2)";
- reg = <0xf80000 0x80000>;
- read-only;
- };
- };
- };
+&phy0 {
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
&gpio {
line-name = "PCIE Bus reset";
};
};
-
-&wmac {
- status = "okay";
- qca,no-eeprom;
-};
-
-ð1 {
- status = "okay";
-
- phy-handle = <&phy0>;
- pll-data = <0x3000000 0x101 0x1313>;
-
- gmac-config {
- device = <&gmac>;
- ge0-sgmii = <0>;
- };
-};
-
-&mdio1 {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-};