ath79: convert Araknis AN-300-AP-I-N WiFis to nvmem-cells

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts

diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
index e13b58b600f93d70e1f0e8baafb4e3429df240d1..485ef30e2c114ffb5a2608320d2d9e38a19136b4 100644 (file)
--- a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
+++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
@@ -1,25 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca955x.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca9557.dtsi"
-
 / {
        compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
        model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
 
        aliases {
-               label-mac-device = &eth1;
                mdio-gpio1 = &mdio2;
                serial0 = &uart;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
        keys {
                compatible = "gpio-keys";
 
@@ -53,8 +47,6 @@
 &eth1 {
        status = "okay";
 
-       mtd-mac-address = <&art 0x10>;
-
        pll-data = <0x03000101 0x80000101 0x80001313>;
        phy-handle = <&phy0>;
 
@@ -68,12 +60,10 @@
 &spi {
        status = "okay";
 
-       num-cs = <1>;
-
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
-               spi-max-frequency = <104000000>;
+               spi-max-frequency = <40000000>;
 
                partitions {
                        compatible = "fixed-partitions";
@@ -81,32 +71,35 @@
                        #size-cells = <1>;
 
                        partition@0 {
-                               label = "routerboot";
-                               reg = <0x000000 0x00e000>;
-                               read-only;
-                       };
-
-                       art: partition@e000 {
-                               label = "art";
-                               reg = <0x000e000 0x001000>;
-                               read-only;
-                       };
-
-                       partition@f000 {
-                               label = "bios";
-                               reg = <0x000f000 0x001000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "routerboot2";
-                               reg = <0x010000 0x00f000>;
-                               read-only;
-                       };
-
-                       partition@1f000 {
-                               label = "soft_config";
-                               reg = <0x001f000 0x001000>;
+                               label = "RouterBoot";
+                               reg = <0x0 0x20000>;
+                               compatible = "mikrotik,routerboot-partitions";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "bootloader1";
+                                       reg = <0x0 0x0>;
+                                       read-only;
+                               };
+
+                               hard_config {
+                                       read-only;
+                               };
+
+                               bios {
+                                       size = <0x1000>;
+                                       read-only;
+                               };
+
+                               partition@10000 {
+                                       label = "bootloader2";
+                                       reg = <0x10000 0x0>;
+                                       read-only;
+                               };
+
+                               soft_config {
+                               };
                        };
 
                        partition@20000 {
@@ -118,10 +111,6 @@
        };
 };
 
-&uart {
-       status = "okay";
-};
-
 &wmac {
        status = "okay";