ath79: TP-Link EAP245 v3: convert radios to nvmem-cells
[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9557_engenius_enstationac-v1.dts
index af397dfd3a77167e1a6b92ffc769086ae540c9e8..812fcfc5dcbf89ad6436e8887db1c93e2866d9ba 100644 (file)
@@ -1,10 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
+#include "qca955x_senao_loader.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "engenius,enstationac-v1", "qca,qca9557";
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };
        };
-
-       virtual_flash {
-               compatible = "mtd-concat";
-
-               devices = <&fwconcat0 &fwconcat1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               compatible = "openwrt,uimage", "denx,uimage";
-                               openwrt,ih-magic = <IH_MAGIC_OKLI>;
-                               label = "firmware";
-                               reg = <0x0 0x0>;
-                       };
-               };
-       };
 };
 
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@50000 {
-                               label = "custom";
-                               reg = <0x050000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@a0000 {
-                               label = "loader";
-                               reg = <0x0a0000 0x010000>;
-                               read-only;
-                       };
-
-                       fwconcat1: partition@b0000 {
-                               label = "fwconcat1";
-                               reg = <0x0b0000 0x170000>;
-                       };
-
-                       partition@220000 {
-                               label = "fakeroot";
-                               reg = <0x220000 0x010000>;
-                               read-only;
-                       };
-
-                       fwconcat0: partition@230000 {
-                               label = "fwconcat0";
-                               reg = <0x230000 0xb40000>;
-                       };
-
-                       partition@d70000 {
-                               label = "failsafe";
-                               reg = <0xd70000 0x280000>;
-                               read-only;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
+&partitions {
+       art: partition@ff0000 {
+               label = "art";
+               reg = <0xff0000 0x010000>;
+               read-only;
        };
 };
 
 &eth0 {
        status = "okay";
 
-       mtd-mac-address = <&art 0x0>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
 
        phy-handle = <&phy1>;
        phy-mode = "rgmii-id";
 &eth1 {
        status = "okay";
 
-       mtd-mac-address = <&art 0x0>;
-       mtd-mac-address-increment = <1>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
 
        phy-handle = <&phy2>;
 
        qca955x-sgmii-fixup;
 };
 
-&pcie0 {
-       status = "okay";
+&art {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
 
-       wifi@0,0,0 {
-               compatible = "qcom,ath10k";
-               reg = <0x0 0 0 0 0>;
-               qca,no-eeprom;
+       macaddr_art_0: macaddr@0 {
+               reg = <0x0 0x6>;
        };
 };