ath79: use gpios for switch management in WZR-HP-G300NH variants

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9558_allnet_all-wap02860ac.dts

diff --git a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
index 1cca39de38093c745273134d7763651cb7503e34..c8b1d94c96572fbd31d692e4362f366cc7b2feb1 100644 (file)
--- a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
+++ b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
+#include "qca955x_senao_loader.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-       model = "ALLNET ALL-WAP02860AC";
        compatible = "allnet,all-wap02860ac", "qca,qca9558";
+       model = "ALLNET ALL-WAP02860AC";
 
        aliases {
                label-mac-device = &eth0;
@@ -22,8 +22,9 @@
 
                reset {
                        label = "reset";
-                       linux,code = <KEY_RESTART>;
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
@@ -58,11 +59,13 @@
 &eth0 {
        status = "okay";
 
-       pll-data = <0x8e000000 0x80000101 0x80001313>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+
        phy-handle = <&phy5>;
-       phy-mode = "rgmii-rxid";
+       phy-mode = "rgmii-id";
 
-       mtd-mac-address = <&art 0x0>;
+       pll-data = <0x82000000 0x80000101 0x80001313>;
 };
 
 &mdio0 {
@@ -75,81 +78,33 @@
        };
 };
 
-&pcie0 {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "qcom,ath10k";
-               reg = <0 0 0 0 0>;
+&partitions {
+       art: partition@ff0000 {
+               label = "art";
+               reg = <0xff0000 0x010000>;
+               read-only;
        };
 };
 
-&pll {
-       clocks = <&extosc>;
-};
-
-&spi {
+&wmac {
        status = "okay";
 
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@50000 {
-                               label = "custom";
-                               reg = <0x050000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@a0000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x0a0000 0xcd0000>;
-                       };
-
-                       partition@d70000 {
-                               label = "failsafe";
-                               reg = <0xd70000 0x280000>;
-                               read-only;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
+       mtd-cal-data = <&art 0x1000>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
 };
 
-&uart {
+&pcie0 {
        status = "okay";
 };
 
-&wmac {
-       status = "okay";
+&art {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
 
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&art 0x0>;
-       mtd-mac-address-increment = <1>;
-       qca-no-eeprom;
+       macaddr_art_0: macaddr@0 {
+               reg = <0x0 0x6>;
+       };
 };