// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include "qca955x.dtsi"
-
/ {
compatible = "ocedo,ursus", "qca,qca9558";
model = "OCEDO Ursus";
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
leds {
compatible = "gpio-leds";
wifi2 {
- label = "ursus:green:wlan2g";
+ label = "green:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5 {
- label = "ursus:green:wlan5g";
+ label = "green:wlan5g";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
status = "okay";
};
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
&spi {
status = "okay";
- num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <25000000>;
+ spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
status = "okay";
mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x06>;
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
};
&mdio0 {
phy2: ethernet-phy@2 {
reg = <2>;
+ at803x-override-sgmii-link-check;
};
};
ð0 {
status = "okay";
- mtd-mac-address = <&art 0x00>;
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
phy-mode = "rgmii-rxid";
phy-handle = <&phy1>;
ð1 {
status = "okay";
- mtd-mac-address = <&art 0x12>;
+ nvmem-cells = <&macaddr_art_12>;
+ nvmem-cell-names = "mac-address";
phy-handle = <&phy2>;
pll-data = <0x3000101 0x101 0x1313>;
+ qca955x-sgmii-fixup;
+};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_art_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
};