// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca955x.dtsi"
+#include "qca955x_zyxel_nbg6x16.dtsi"
/ {
compatible = "zyxel,nbg6716", "qca,qca9558";
compatible = "gpio-leds";
led_power: power {
- label = "nbg6716:white:power";
+ label = "white:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
internet {
- label = "nbg6716:white:internet";
+ label = "white:internet";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
usb1 {
- label = "nbg6716:white:usb1";
+ label = "white:usb1";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port1>;
};
usb2 {
- label = "nbg6716:white:usb2";
+ label = "white:usb2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0>;
};
wifi2g {
- label = "nbg6716:white:wifi2g";
+ label = "white:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5g {
- label = "nbg6716:white:wifi5g";
+ label = "white:wifi5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
- label = "nbg6716:white:wps";
+ label = "white:wps";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
+};
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wifi {
- label = "WiFi button";
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- usb1 {
- label = "USB1 eject button";
- linux,code = <BTN_1>;
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- usb2 {
- label = "USB2 eject button";
- linux,code = <BTN_2>;
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "WPS button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
+&keys {
+ usb1 {
+ label = "USB1 eject button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
};
-};
-&gpio {
- usb_power {
- gpio-hog;
- gpios = <16 0>;
- output-high;
- line-name = "nbg6716:power:usb";
+ usb2 {
+ label = "USB2 eject button";
+ linux,code = <BTN_2>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
};
};
-&uart {
- status = "okay";
+&gpio_usb_power {
+ line-name = "nbg6716:power:usb";
};
&spi {
};
};
-&mdio0 {
- status = "okay";
-
- phy17: ethernet-phy@11 {
- reg = <0x11>;
- phy-mode = "rgmii-id";
- };
-
- switch0@1f {
- compatible = "qca,ar8327";
- reg = <0x1f>;
- qca,ar8327-initvals = <
- 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
- 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
- 0x10 0x81000080 /* POWER_ON_STRIP */
- 0x50 0xffb7ffb7 /* LED_CTRL0 */
- 0x54 0xffb7ffb7 /* LED_CTRL1 */
- 0x58 0xffb7ffb7 /* LED_CTRL2 */
- 0x5c 0x03ffff00 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- 0x94 0x0000007e /* PORT6 STATUS */
- >;
- };
-};
-
-&mdio1 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "sgmii";
- };
-};
-
-
-ð0 {
- status = "okay";
-
- pll-data = <0xa6000000 0x00000101 0x00001616>;
- phy-handle = <&phy17>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-ð1 {
- status = "okay";
-
- pll-data = <0x03000101 0x00000101 0x00001616>;
- phy-handle = <&phy1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gpio {
- status = "okay";
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
-};
-
&pcie1 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
};
};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
-};
-
-&usb1 {
- status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};